openwrt/target/linux/layerscape/patches-5.4/701-net-0333-drivers-net-ph...

38 lines
1.3 KiB
Diff

From ca49d3e4820704bfc3d2b48f59238d26a584602d Mon Sep 17 00:00:00 2001
From: Alex Marginean <alexandru.marginean@nxp.com>
Date: Fri, 20 Sep 2019 19:37:19 +0300
Subject: [PATCH] drivers: net: phy: aquantia: enable USX AN for USXGMII
protocol
Depending on FW defaults USX AN in AQR PHY must be explicitly enabled when
using USXGMII. Enable it based on interface type.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
---
drivers/net/phy/aquantia_main.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/net/phy/aquantia_main.c
+++ b/drivers/net/phy/aquantia_main.c
@@ -33,6 +33,9 @@
#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII 6
#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII 10
+#define MDIO_PHYXS_VEND_PROV2 0xC441
+#define MDIO_PHYXS_VEND_PROV2_USX_AN BIT(3)
+
#define MDIO_AN_VEND_PROV 0xc400
#define MDIO_AN_VEND_PROV_1000BASET_FULL BIT(15)
#define MDIO_AN_VEND_PROV_1000BASET_HALF BIT(14)
@@ -310,6 +313,10 @@ static int aqr_config_aneg_set_prot(stru
aquantia_syscfg[if_type].syscfg);
}
+ if (if_type == PHY_INTERFACE_MODE_USXGMII)
+ phy_write_mmd(phydev, MDIO_MMD_PHYXS, MDIO_PHYXS_VEND_PROV2,
+ MDIO_PHYXS_VEND_PROV2_USX_AN);
+
/* wake PHY back up */
phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, 0);
mdelay(10);