openwrt/target/linux/ramips/dts/mt7620n_sunvalley_filehub.dtsi

150 lines
2.2 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7620n.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
aliases {
label-mac-device = &ethernet;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
virtual_flash {
compatible = "mtd-concat";
devices = <&fwconcat0 &fwconcat1 &fwconcat2>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
compatible = "openwrt,uimage", "denx,uimage";
openwrt,ih-magic = <IH_MAGIC_OKLI>;
label = "firmware";
reg = <0x0 0x0>;
};
};
};
};
&gpio2 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&i2c {
status = "okay";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "config";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "loader";
reg = <0x50000 0x10000>;
read-only;
};
fwconcat1: partition@60000 {
label = "fwconcat1";
reg = <0x60000 0x170000>;
};
partition@1d0000 {
label = "u-boot-env";
reg = <0x1d0000 0x10000>;
};
fwconcat2: partition@1e0000 {
label = "fwconcat2";
reg = <0x1e0000 0x20000>;
};
fwconcat0: partition@200000 {
label = "fwconcat0";
reg = <0x200000 0x600000>;
};
};
};
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};
&ethernet {
nvmem-cells = <&macaddr_factory_28>;
nvmem-cell-names = "mac-address";
};
&wmac {
ralink,mtd-eeprom = <&factory 0x0>;
};
&state_default {
gpio {
groups = "wled", "ephy";
function = "gpio";
};
};
&factory {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_28: macaddr@28 {
reg = <0x28 0x6>;
};
};