openwrt/target/linux/bcm27xx/patches-5.10/950-0484-media-i2c-imx477-R...

143 lines
4.7 KiB
Diff

From d5517d71c77ba67cb9dc1985a649ff11017eca0e Mon Sep 17 00:00:00 2001
From: Naushir Patuck <naush@raspberrypi.com>
Date: Wed, 10 Feb 2021 10:18:53 +0000
Subject: [PATCH] media: i2c: imx477: Remove auto frame length
adjusting
The V4L2_CID_EXPOSURE_AUTO_PRIORITY was used to let the sensor control
frame length (effectively framerate) based on the requested exposure
time requested. Remove this feature as it is never used, and goes
against how V4L2 likes to handle exposure and vblank controls.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
---
drivers/media/i2c/imx477.c | 83 +++-----------------------------------
1 file changed, 6 insertions(+), 77 deletions(-)
--- a/drivers/media/i2c/imx477.c
+++ b/drivers/media/i2c/imx477.c
@@ -1082,8 +1082,6 @@ struct imx477 {
struct v4l2_ctrl *hflip;
struct v4l2_ctrl *vblank;
struct v4l2_ctrl *hblank;
- /* This ctrl allows automatic variable framerate */
- struct v4l2_ctrl *exposure_auto;
/* Current mode */
const struct imx477_mode *mode;
@@ -1280,66 +1278,14 @@ static int imx477_open(struct v4l2_subde
return 0;
}
-static int imx477_set_exposure(struct imx477 *imx477, unsigned int val)
-{
- int ret;
-
- ret = imx477_write_reg(imx477, IMX477_REG_EXPOSURE,
- IMX477_REG_VALUE_16BIT, val);
-
- /* Setup the frame length in the case of auto framerate mode. */
- if (imx477->exposure_auto->val) {
- unsigned int frame_length, frame_length_max, frame_length_min;
-
- frame_length_min = imx477->vblank->minimum +
- imx477->mode->height;
- frame_length_max = imx477->vblank->maximum +
- imx477->mode->height;
- frame_length = max(frame_length_min,
- val + IMX477_EXPOSURE_OFFSET);
- frame_length = min(frame_length_max, frame_length);
- ret += imx477_write_reg(imx477, IMX477_REG_FRAME_LENGTH,
- IMX477_REG_VALUE_16BIT, frame_length);
- }
-
- return ret;
-}
-
static void imx477_adjust_exposure_range(struct imx477 *imx477,
struct v4l2_ctrl *ctrl)
{
int exposure_max, exposure_def;
- if (ctrl->id == V4L2_CID_VBLANK || !ctrl->val) {
- /*
- * Either VBLANK has been changed or auto framerate
- * adjusting has been disabled. Honour the VBLANK limits
- * when setting exposure.
- */
- exposure_max = imx477->mode->height + imx477->vblank->val -
- IMX477_EXPOSURE_OFFSET;
-
- if (ctrl->id == V4L2_CID_EXPOSURE_AUTO_PRIORITY) {
- /*
- * Allow VBLANK adjustments since the driver is not
- * handling frame length control automatically.
- */
- __v4l2_ctrl_grab(imx477->vblank, false);
- }
- } else {
- /*
- * Auto framerate adjusting has been enabled. VBLANK
- * ctrl has been disabled and exposure can ramp up
- * to the maximum allowable value.
- */
- exposure_max = IMX477_EXPOSURE_MAX;
- /*
- * Do not allow VBLANK adjustments if the driver is
- * handling it frame length control automatically.
- */
- __v4l2_ctrl_grab(imx477->vblank, true);
- }
-
+ /* Honour the VBLANK limits when setting exposure. */
+ exposure_max = imx477->mode->height + imx477->vblank->val -
+ IMX477_EXPOSURE_OFFSET;
exposure_def = min(exposure_max, imx477->exposure->val);
__v4l2_ctrl_modify_range(imx477->exposure, imx477->exposure->minimum,
exposure_max, imx477->exposure->step,
@@ -1353,14 +1299,8 @@ static int imx477_set_ctrl(struct v4l2_c
struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
int ret = 0;
- if (ctrl->id == V4L2_CID_VBLANK ||
- ctrl->id == V4L2_CID_EXPOSURE_AUTO_PRIORITY) {
- /*
- * These controls may change the limits of usable exposure,
- * so check and adjust if necessary.
- */
+ if (ctrl->id == V4L2_CID_VBLANK)
imx477_adjust_exposure_range(imx477, ctrl);
- }
/*
* Applying V4L2 control value only happens
@@ -1375,14 +1315,8 @@ static int imx477_set_ctrl(struct v4l2_c
IMX477_REG_VALUE_16BIT, ctrl->val);
break;
case V4L2_CID_EXPOSURE:
- ret = imx477_set_exposure(imx477, ctrl->val);
- break;
- case V4L2_CID_EXPOSURE_AUTO_PRIORITY:
- /*
- * imx477_set_exposure() will recalculate the frame length
- * to adjust the framerate to match the exposure.
- */
- ret = imx477_set_exposure(imx477, imx477->exposure->val);
+ ret = imx477_write_reg(imx477, IMX477_REG_EXPOSURE,
+ IMX477_REG_VALUE_16BIT, ctrl->val);
break;
case V4L2_CID_DIGITAL_GAIN:
ret = imx477_write_reg(imx477, IMX477_REG_DIGITAL_GAIN,
@@ -2005,11 +1939,6 @@ static int imx477_init_controls(struct i
IMX477_DGTL_GAIN_MIN, IMX477_DGTL_GAIN_MAX,
IMX477_DGTL_GAIN_STEP, IMX477_DGTL_GAIN_DEFAULT);
- imx477->exposure_auto =
- v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops,
- V4L2_CID_EXPOSURE_AUTO_PRIORITY,
- 0, 1, 1, 0);
-
imx477->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops,
V4L2_CID_HFLIP, 0, 1, 1, 0);
if (imx477->hflip)