mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-06-13 18:53:52 +02:00
![Christian Marangi](/assets/img/avatar_default.png)
Since with recent kernel version DTS moved to a dedicated directory, it's required to split files to per kernel version to follow kernel version directory structure. Also makes use of DEVICE_DTS_DIR to target the correct DTS directory based on the kernel version. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
325 lines
5.4 KiB
Plaintext
325 lines
5.4 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "qcom-ipq4019.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/soc/qcom,tcsr.h>
|
|
|
|
/ {
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x10000000>;
|
|
};
|
|
|
|
aliases {
|
|
serial0 = &blsp1_uart1;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
soc {
|
|
tcsr@1949000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1949000 0x100>;
|
|
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
|
|
};
|
|
|
|
tcsr@194b000 {
|
|
status = "okay";
|
|
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x194b000 0x100>;
|
|
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
|
|
};
|
|
|
|
ess_tcsr@1953000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1953000 0x1000>;
|
|
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
|
|
};
|
|
|
|
tcsr@1957000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1957000 0x100>;
|
|
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&tlmm 4 1>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&prng {
|
|
status = "okay";
|
|
};
|
|
|
|
&watchdog {
|
|
status = "okay";
|
|
};
|
|
|
|
&cryptobam {
|
|
status = "okay";
|
|
};
|
|
|
|
&crypto {
|
|
status = "okay";
|
|
};
|
|
|
|
&tlmm {
|
|
serial_pins: serial_pinmux {
|
|
mux {
|
|
pins = "gpio60", "gpio61";
|
|
function = "blsp_uart0";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
spi_0_pins: spi_0_pinmux {
|
|
pinmux {
|
|
function = "blsp_spi0";
|
|
pins = "gpio55", "gpio56", "gpio57";
|
|
};
|
|
pinmux_cs {
|
|
function = "gpio";
|
|
pins = "gpio54";
|
|
};
|
|
pinconf {
|
|
pins = "gpio55", "gpio56", "gpio57";
|
|
drive-strength = <12>;
|
|
bias-disable;
|
|
};
|
|
pinconf_cs {
|
|
pins = "gpio54";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
mdio_pins: mdio_pinmux {
|
|
mux_1 {
|
|
pins = "gpio53";
|
|
function = "mdio";
|
|
bias-pull-up;
|
|
};
|
|
mux_2 {
|
|
pins = "gpio52";
|
|
function = "mdc";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
i2c_0_pins: i2c_0_pinmux {
|
|
mux {
|
|
pins = "gpio58", "gpio59";
|
|
function = "blsp_i2c0";
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
&blsp_dma {
|
|
status = "okay";
|
|
};
|
|
|
|
&blsp1_uart1 {
|
|
pinctrl-0 = <&serial_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&blsp1_spi1 {
|
|
pinctrl-0 = <&spi_0_pins>;
|
|
pinctrl-names = "default";
|
|
cs-gpios = <&tlmm 54 0>, <&tlmm 63 0>;
|
|
num-cs = <2>;
|
|
status = "okay";
|
|
|
|
xt25f128b@0 {
|
|
/*
|
|
* Factory U-boot looks in 0:BOOTCONFIG partition for active
|
|
* partitions settings and mangles the partition config so
|
|
* 0:QSEE/0:QSEE_1, 0:CDT/0:CDT_1 and 0:APPSBL/0:APPSBL_1 pairs
|
|
* can be swaped. It isn't a problem but we never can be sure where
|
|
* OFW put factory images. "n25q128a11" is required for proper nor
|
|
* recognition in u-boot.
|
|
*/
|
|
compatible = "jedec,spi-nor", "n25q128a11";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0>;
|
|
spi-max-frequency = <24000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "0:SBL1";
|
|
reg = <0x0 0x40000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@40000 {
|
|
label = "0:MIBIB";
|
|
reg = <0x40000 0x20000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@60000 {
|
|
label = "0:BOOTCONFIG";
|
|
reg = <0x60000 0x20000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@80000 {
|
|
label = "0:BOOTCONFIG1";
|
|
reg = <0x80000 0x20000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@a0000 {
|
|
label = "0:QSEE";
|
|
reg = <0xa0000 0x60000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
label = "0:QSEE_1";
|
|
reg = <0x100000 0x60000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@160000 {
|
|
label = "0:CDT";
|
|
reg = <0x160000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@170000 {
|
|
label = "0:CDT_1";
|
|
reg = <0x170000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@180000 {
|
|
label = "0:DDRPARAMS";
|
|
reg = <0x180000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@190000 {
|
|
label = "0:APPSBLENV";
|
|
reg = <0x190000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1a0000 {
|
|
label = "0:APPSBL";
|
|
reg = <0x1a0000 0xa0000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@240000 {
|
|
label = "0:APPSBL_1";
|
|
reg = <0x240000 0xa0000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@2e0000 {
|
|
label = "0:ART";
|
|
reg = <0x2e0000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
config: partition@2f0000 {
|
|
label = "0:CONFIG";
|
|
reg = <0x2f0000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@300000 {
|
|
label = "0:CONFIG_RW";
|
|
reg = <0x300000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@310000 {
|
|
label = "0:EVENTSLOG";
|
|
reg = <0x310000 0x90000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
|
|
xt26g02a@1 {
|
|
/*
|
|
* Factory U-boot looks in 0:BOOTCONFIG partition for active
|
|
* partitions settings and mangles the partition config so
|
|
* rootfs/rootfs_1 pairs can be swaped.
|
|
* It isn't a problem but we never can be sure where OFW put
|
|
* factory images. "spinand,mt29f" value is required for proper
|
|
* nand recognition in u-boot.
|
|
*/
|
|
compatible = "spi-nand", "spinand,mt29f";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <1>;
|
|
spi-max-frequency = <24000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "rootfs_1";
|
|
reg = <0x00000000 0x08000000>;
|
|
};
|
|
|
|
partition@8000000 {
|
|
label = "rootfs";
|
|
reg = <0x08000000 0x08000000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
status = "okay";
|
|
pinctrl-0 = <&mdio_pins>;
|
|
pinctrl-names = "default";
|
|
phy-reset-gpio = <&tlmm 62 0>;
|
|
};
|
|
|
|
&usb3_ss_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_hs_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2_hs_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2 {
|
|
status = "okay";
|
|
};
|