openwrt/target/linux/ath79/patches-5.10/920-mikrotik-rb4xx.patch

77 lines
2.6 KiB
Diff

--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2141,6 +2141,14 @@ config RAVE_SP_CORE
Select this to get support for the Supervisory Processor
device found on several devices in RAVE line of hardware.
+config MFD_RB4XX_CPLD
+ tristate "CPLD driver for Mikrotik RB4xx series boards
+ select MFD_CORE
+ depends on ATH79 || COMPILE_TEST
+ help
+ Enables support for the CPLD chip (NAND & GPIO) on Mikrotik
+ Routerboard RB4xx series.
+
config SGI_MFD_IOC3
tristate "SGI IOC3 core driver"
depends on PCI && MIPS && 64BIT
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -264,6 +264,7 @@ obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-b
obj-$(CONFIG_MFD_STMFX) += stmfx.o
obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o
+obj-$(CONFIG_MFD_RB4XX_CPLD) += rb4xx-cpld.o
obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1518,6 +1518,12 @@ config GPIO_SODAVILLE
help
Say Y here to support Intel Sodaville GPIO.
+config GPIO_RB4XX
+ tristate "GPIO expander for Mikrotik RB4xx series boards"
+ depends on MFD_RB4XX_CPLD
+ help
+ GPIO driver for Mikrotik Routerboard RB4xx series.
+
endmenu
menu "SPI GPIO expanders"
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -120,6 +120,7 @@ obj-$(CONFIG_GPIO_PL061) += gpio-pl061.
obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RASPBERRYPI_EXP) += gpio-raspberrypi-exp.o
+obj-$(CONFIG_GPIO_RB4XX) += gpio-rb4xx.o
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
obj-$(CONFIG_GPIO_RDA) += gpio-rda.o
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -564,4 +564,11 @@ config MTD_NAND_AR934X
Enables support for NAND controller on Qualcomm Atheros SoCs.
This controller is found on AR934x and QCA955x SoCs.
+config MTD_NAND_RB4XX
+ tristate "Support for NAND driver for Mikrotik RB4xx series boards"
+ depends on MFD_RB4XX_CPLD
+ help
+ Enables support for the NAND flash chip on Mikrotik Routerboard
+ RB4xx series.
+
endif # MTD_RAW_NAND
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_MTD_NAND_MESON) += meson_n
obj-$(CONFIG_MTD_NAND_CADENCE) += cadence-nand-controller.o
obj-$(CONFIG_MTD_NAND_ARASAN) += arasan-nand-controller.o
obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nand.o
+obj-$(CONFIG_MTD_NAND_RB4XX) += nand_rb4xx.o
nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
nand-objs += nand_onfi.o