mirror
/
openwrt
mirror of https://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Releases Activity
openwrt/target/linux/imx6/patches-4.4/204-net-igb-register-mii_bu...

309 lines
8.6 KiB
Diff
Raw Blame History

From 03855caf93f7332a3f320228ba1a0e7baae8a749 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Thu, 15 May 2014 12:36:23 -0700
Subject: [PATCH] net: igb: register mii_bus for SerDes w/ external phy
If an i210 is configured for 1000BASE-BX link_mode and has an external phy
specified, then register an mii bus using the external phy address as
a mask.
An i210 hooked to an external standard phy will be configured with a link_mo
of SGMII in which case phy ops will be configured and used internall in the
igb driver for link status. However, in certain cases one might be using a
backplane SerDes connection to something that talks on the mdio bus but is
not a standard phy, such as a switch. In this case by registering an mdio
bus a phy driver can manage the device.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
drivers/net/ethernet/intel/igb/e1000_82575.c | 15 +++
drivers/net/ethernet/intel/igb/e1000_hw.h | 7 ++
drivers/net/ethernet/intel/igb/igb_main.c | 168 ++++++++++++++++++++++++++-
3 files changed, 185 insertions(+), 5 deletions(-)
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -613,13 +613,25 @@ static s32 igb_get_invariants_82575(stru
switch (link_mode) {
case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
hw->phy.media_type = e1000_media_type_internal_serdes;
+ if (igb_sgmii_uses_mdio_82575(hw)) {
+ u32 mdicnfg = rd32(E1000_MDICNFG);
+ mdicnfg &= E1000_MDICNFG_PHY_MASK;
+ hw->phy.addr = mdicnfg >> E1000_MDICNFG_PHY_SHIFT;
+ hw_dbg("1000BASE_KX w/ external MDIO device at 0x%x\n",
+ hw->phy.addr);
+ } else {
+ hw_dbg("1000BASE_KX");
+ }
break;
case E1000_CTRL_EXT_LINK_MODE_SGMII:
/* Get phy control interface type set (MDIO vs. I2C)*/
if (igb_sgmii_uses_mdio_82575(hw)) {
hw->phy.media_type = e1000_media_type_copper;
dev_spec->sgmii_active = true;
+ hw_dbg("SGMII with external MDIO PHY");
break;
+ } else {
+ hw_dbg("SGMII with external I2C PHY");
}
/* fall through for I2C based SGMII */
case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
@@ -636,8 +648,11 @@ static s32 igb_get_invariants_82575(stru
hw->phy.media_type = e1000_media_type_copper;
dev_spec->sgmii_active = true;
}
+ hw_dbg("SERDES with external SFP");
break;
+ } else {
+ hw_dbg("SERDES");
}
/* do not change link mode for 100BaseFX */
--- a/drivers/net/ethernet/intel/igb/e1000_hw.h
+++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
@@ -27,6 +27,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/netdevice.h>
+#include <linux/phy.h>
#include "e1000_regs.h"
#include "e1000_defines.h"
@@ -543,6 +544,12 @@ struct e1000_hw {
struct e1000_mbx_info mbx;
struct e1000_host_mng_dhcp_cookie mng_cookie;
+#ifdef CONFIG_PHYLIB
+ /* Phylib and MDIO interface */
+ struct mii_bus *mii_bus;
+ struct phy_device *phy_dev;
+ phy_interface_t phy_interface;
+#endif
union {
struct e1000_dev_spec_82575 _82575;
} dev_spec;
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -41,6 +41,7 @@
#include <linux/if_vlan.h>
#include <linux/pci.h>
#include <linux/pci-aspm.h>
+#include <linux/phy.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/ip.h>
@@ -2217,6 +2218,126 @@ static s32 igb_init_i2c(struct igb_adapt
return status;
}
+
+#ifdef CONFIG_PHYLIB
+/*
+ * MMIO/PHYdev support
+ */
+
+static int igb_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+ struct e1000_hw *hw = bus->priv;
+ u16 out;
+ int err;
+
+ err = igb_read_reg_gs40g(hw, mii_id, regnum, &out);
+ if (err)
+ return err;
+ return out;
+}
+
+static int igb_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
+ u16 val)
+{
+ struct e1000_hw *hw = bus->priv;
+
+ return igb_write_reg_gs40g(hw, mii_id, regnum, val);
+}
+
+static int igb_enet_mdio_reset(struct mii_bus *bus)
+{
+ udelay(300);
+ return 0;
+}
+
+static void igb_enet_mii_link(struct net_device *netdev)
+{
+}
+
+/* Probe the mdio bus for phys and connect them */
+static int igb_enet_mii_probe(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct phy_device *phy_dev = NULL;
+ int phy_id;
+
+ /* check for attached phy */
+ for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) {
+ if (hw->mii_bus->phy_map[phy_id]) {
+ phy_dev = hw->mii_bus->phy_map[phy_id];
+ break;
+ }
+ }
+ if (!phy_dev) {
+ netdev_err(netdev, "no PHY found\n");
+ return -ENODEV;
+ }
+
+ hw->phy_interface = PHY_INTERFACE_MODE_RGMII;
+ phy_dev = phy_connect(netdev, dev_name(&phy_dev->dev),
+ igb_enet_mii_link, hw->phy_interface);
+ if (IS_ERR(phy_dev)) {
+ netdev_err(netdev, "could not attach to PHY\n");
+ return PTR_ERR(phy_dev);
+ }
+
+ hw->phy_dev = phy_dev;
+ netdev_info(netdev, "igb PHY driver [%s] (mii_bus:phy_addr=%s)\n",
+ hw->phy_dev->drv->name, dev_name(&hw->phy_dev->dev));
+
+ return 0;
+}
+
+/* Create and register mdio bus */
+static int igb_enet_mii_init(struct pci_dev *pdev)
+{
+ struct mii_bus *mii_bus;
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int err;
+
+ mii_bus = mdiobus_alloc();
+ if (mii_bus == NULL) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ mii_bus->name = "igb_enet_mii_bus";
+ mii_bus->read = igb_enet_mdio_read;
+ mii_bus->write = igb_enet_mdio_write;
+ mii_bus->reset = igb_enet_mdio_reset;
+ snprintf(mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
+ pci_name(pdev), hw->device_id + 1);
+ mii_bus->priv = hw;
+ mii_bus->parent = &pdev->dev;
+ mii_bus->phy_mask = ~(1 << hw->phy.addr);
+
+ err = mdiobus_register(mii_bus);
+ if (err) {
+ printk(KERN_ERR "failed to register mii_bus: %d\n", err);
+ goto err_out_free_mdiobus;
+ }
+ hw->mii_bus = mii_bus;
+
+ return 0;
+
+err_out_free_mdiobus:
+ mdiobus_free(mii_bus);
+err_out:
+ return err;
+}
+
+static void igb_enet_mii_remove(struct e1000_hw *hw)
+{
+ if (hw->mii_bus) {
+ mdiobus_unregister(hw->mii_bus);
+ mdiobus_free(hw->mii_bus);
+ }
+}
+#endif /* CONFIG_PHYLIB */
+
/**
* igb_probe - Device Initialization Routine
* @pdev: PCI device information struct
@@ -2641,6 +2762,13 @@ static int igb_probe(struct pci_dev *pde
}
}
pm_runtime_put_noidle(&pdev->dev);
+
+#ifdef CONFIG_PHYLIB
+ /* create and register the mdio bus if using ext phy */
+ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
+ igb_enet_mii_init(pdev);
+#endif
+
return 0;
err_register:
@@ -2788,6 +2916,10 @@ static void igb_remove(struct pci_dev *p
struct e1000_hw *hw = &adapter->hw;
pm_runtime_get_noresume(&pdev->dev);
+#ifdef CONFIG_PHYLIB
+ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
+ igb_enet_mii_remove(hw);
+#endif
#ifdef CONFIG_IGB_HWMON
igb_sysfs_exit(adapter);
#endif
@@ -3113,6 +3245,12 @@ static int __igb_open(struct net_device
if (!resuming)
pm_runtime_put(&pdev->dev);
+#ifdef CONFIG_PHYLIB
+ /* Probe and connect to PHY if using ext phy */
+ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
+ igb_enet_mii_probe(netdev);
+#endif
+
/* start the watchdog. */
hw->mac.get_link_status = 1;
schedule_work(&adapter->watchdog_task);
@@ -7106,21 +7244,41 @@ void igb_alloc_rx_buffers(struct igb_rin
static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
{
struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
struct mii_ioctl_data *data = if_mii(ifr);
- if (adapter->hw.phy.media_type != e1000_media_type_copper)
+ if (adapter->hw.phy.media_type != e1000_media_type_copper &&
+ !(rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO))
return -EOPNOTSUPP;
switch (cmd) {
case SIOCGMIIPHY:
- data->phy_id = adapter->hw.phy.addr;
+ data->phy_id = hw->phy.addr;
break;
case SIOCGMIIREG:
- if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
- &data->val_out))
- return -EIO;
+ if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
+ if (igb_read_reg_gs40g(&adapter->hw, data->phy_id,
+ data->reg_num & 0x1F,
+ &data->val_out))
+ return -EIO;
+ } else {
+ if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
+ &data->val_out))
+ return -EIO;
+ }
break;
case SIOCSMIIREG:
+ if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
+ if (igb_write_reg_gs40g(hw, data->phy_id,
+ data->reg_num & 0x1F,
+ data->val_in))
+ return -EIO;
+ } else {
+ if (igb_write_phy_reg(hw, data->reg_num & 0x1F,
+ data->val_in))
+ return -EIO;
+ }
+ break;
default:
return -EOPNOTSUPP;
}
View Git Blame Copy Permalink