openwrt

Go to file

Felix Fietkau 5a56b0fe35 kernel: make AIO support configurable (disabled by default) SVN-Revision: 25769		2011-02-27 19:52:48 +00:00
docs	kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	add config.rpath and link it in autotools.mk if missing, some packages might need it, especially users of lib-link.m4 or iconv.m4	2011-02-27 15:39:27 +00:00
package	acx-mac8011: bump to 20110123	2011-02-27 15:45:05 +00:00
scripts	add config.rpath and link it in autotools.mk if missing, some packages might need it, especially users of lib-link.m4 or iconv.m4	2011-02-27 15:39:27 +00:00
target	kernel: when disabling common quirks, disable them in the usb subsystem as well - bios handover is useless for most platforms	2011-02-27 19:52:43 +00:00
toolchain	backport fa526 optimization for gcc 4.5+	2011-02-25 17:44:18 +00:00
tools	tools/e2fsprogs: move uuid/uuid.h into a subdirectory, it conflicts with a system header file with the same name on darwin	2011-02-20 03:25:56 +00:00
.gitignore	.gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default	2010-12-04 10:27:13 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	kernel: make AIO support configurable (disabled by default)	2011-02-27 19:52:48 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	switch to LuCI trunk, should be stable enough for common use now	2010-11-16 00:05:41 +00:00
rules.mk	We use different toolchain directories for different ARM archs, so we should set the default arch of gcc to reflect this.	2011-02-25 16:52:25 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org