mirror
/
openwrt
mirror of https://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Releases Activity
openwrt/target/linux/ipq806x/patches-5.15/083-ipq8064-dtsi-additions....

372 lines
8.8 KiB
Diff
Raw Blame History

--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -10,6 +10,8 @@
#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
/ {
#address-cells = <1>;
@@ -30,6 +32,16 @@
next-level-cache = <&L2>;
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
+ clocks = <&kraitcc 0>, <&kraitcc 4>;
+ clock-names = "cpu", "l2";
+ clock-latency = <100000>;
+ cpu-supply = <&smb208_s2a>;
+ operating-points-v2 = <&opp_table0>;
+ voltage-tolerance = <5>;
+ cooling-min-state = <0>;
+ cooling-max-state = <10>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SPC>;
};
cpu1: cpu@1 {
@@ -40,11 +52,125 @@
next-level-cache = <&L2>;
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
+ clocks = <&kraitcc 1>, <&kraitcc 4>;
+ clock-names = "cpu", "l2";
+ clock-latency = <100000>;
+ cpu-supply = <&smb208_s2b>;
+ operating-points-v2 = <&opp_table0>;
+ voltage-tolerance = <5>;
+ cooling-min-state = <0>;
+ cooling-max-state = <10>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SPC>;
+ };
+
+ idle-states {
+ CPU_SPC: spc {
+ compatible = "qcom,idle-state-spc";
+ status = "disabled";
+ entry-latency-us = <400>;
+ exit-latency-us = <900>;
+ min-residency-us = <3000>;
+ };
};
+ };
- L2: l2-cache {
- compatible = "cache";
- cache-level = <2>;
+ opp_table_l2: opp_table_l2 {
+ compatible = "operating-points-v2";
+
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <100000>;
+ opp-level = <0>;
+ };
+
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <100000>;
+ opp-level = <1>;
+ };
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1150000>;
+ clock-latency-ns = <100000>;
+ opp-level = <2>;
+ };
+ };
+
+ opp_table0: opp_table0 {
+ compatible = "operating-points-v2-kryo-cpu";
+ nvmem-cells = <&speedbin_efuse>;
+
+ /*
+ * Voltage thresholds are <target min max>
+ */
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
+ opp-microvolt-speed0-pvs1-v0 = <925000 878750 971250>;
+ opp-microvolt-speed0-pvs2-v0 = <875000 831250 918750>;
+ opp-microvolt-speed0-pvs3-v0 = <800000 760000 840000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ opp-level = <0>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
+ opp-microvolt-speed0-pvs1-v0 = <975000 926250 1023750>;
+ opp-microvolt-speed0-pvs2-v0 = <925000 878750 971250>;
+ opp-microvolt-speed0-pvs3-v0 = <850000 807500 892500>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ opp-level = <1>;
+ };
+
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
+ opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
+ opp-microvolt-speed0-pvs2-v0 = <995000 945250 1044750>;
+ opp-microvolt-speed0-pvs3-v0 = <900000 855000 945000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ opp-level = <1>;
+ };
+
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1150000 1092500 1207500>;
+ opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
+ opp-microvolt-speed0-pvs2-v0 = <1025000 973750 1076250>;
+ opp-microvolt-speed0-pvs3-v0 = <950000 902500 997500>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ opp-level = <1>;
+ };
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1200000 1140000 1260000>;
+ opp-microvolt-speed0-pvs1-v0 = <1125000 1068750 1181250>;
+ opp-microvolt-speed0-pvs2-v0 = <1075000 1021250 1128750>;
+ opp-microvolt-speed0-pvs3-v0 = <1000000 950000 1050000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ opp-level = <2>;
+ };
+
+ opp-1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1250000 1187500 1312500>;
+ opp-microvolt-speed0-pvs1-v0 = <1175000 1116250 1233750>;
+ opp-microvolt-speed0-pvs2-v0 = <1125000 1068750 1181250>;
+ opp-microvolt-speed0-pvs3-v0 = <1050000 997500 1102500>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ opp-level = <2>;
};
};
@@ -317,6 +443,15 @@
};
};
+ fab-scaling {
+ compatible = "qcom,fab-scaling";
+ clocks = <&rpmcc RPM_APPS_FABRIC_A_CLK>, <&rpmcc RPM_EBI1_A_CLK>;
+ clock-names = "apps-fab-clk", "ddr-fab-clk";
+ fab_freq_high = <533000000>;
+ fab_freq_nominal = <400000000>;
+ cpu_freq_threshold = <1000000000>;
+ };
+
firmware {
scm {
compatible = "qcom,scm-ipq806x", "qcom,scm";
@@ -384,6 +519,15 @@
};
};
+ i2c4_pins: i2c4_pinmux {
+ mux {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
@@ -437,6 +581,27 @@
bias-bus-hold;
};
};
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29",
+ "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59",
+ "gpio60", "gpio61", "gpio62";
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
};
intc: interrupt-controller@2000000 {
@@ -513,6 +678,17 @@
regulator;
};
+ saw_l2: regulator@02012000 {
+ compatible = "qcom,saw2", "syscon";
+ reg = <0x02012000 0x1000>;
+ regulator;
+ };
+
+ sic_non_secure: sic-non-secure@12100000 {
+ compatible = "syscon";
+ reg = <0x12100000 0x10000>;
+ };
+
gsbi2: gsbi@12480000 {
compatible = "qcom,gsbi-v1.0.0";
cell-index = <2>;
@@ -637,6 +813,33 @@
};
};
+ gsbi6: gsbi@16500000 {
+ status = "disabled";
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <6>;
+ reg = <0x16500000 0x100>;
+ clocks = <&gcc GSBI6_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ syscon-tcsr = <&tcsr>;
+
+ gsbi6_i2c: i2c@16580000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x16580000 0x1000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
gsbi7: gsbi@16600000 {
status = "disabled";
compatible = "qcom,gsbi-v1.0.0";
@@ -658,6 +861,19 @@
clock-names = "core", "iface";
status = "disabled";
};
+
+ gsbi7_i2c: i2c@16680000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x16680000 0x1000>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
rng@1a500000 {
@@ -761,6 +977,17 @@
};
};
+ L2: l2-cache {
+ compatible = "qcom,krait-cache", "cache";
+ cache-level = <2>;
+ qcom,saw = <&saw_l2>;
+
+ clocks = <&kraitcc 4>;
+ clock-names = "l2";
+ l2-supply = <&smb208_s1a>;
+ operating-points-v2 = <&opp_table_l2>;
+ };
+
rpm: rpm@108000 {
compatible = "qcom,rpm-ipq8064";
reg = <0x108000 0x1000>;
@@ -828,6 +1055,11 @@
clock-output-names = "acpu_l2_aux";
};
+ kraitcc: clock-controller {
+ compatible = "qcom,krait-cc-v1";
+ #clock-cells = <1>;
+ };
+
lcc: clock-controller@28000000 {
compatible = "qcom,lcc-ipq8064";
reg = <0x28000000 0x1000>;
@@ -835,6 +1067,11 @@
#reset-cells = <1>;
};
+ sfpb_mutex_block: syscon@1200600 {
+ compatible = "syscon";
+ reg = <0x01200600 0x100>;
+ };
+
pcie0: pci@1b500000 {
compatible = "qcom,pcie-ipq8064";
reg = <0x1b500000 0x1000
@@ -1184,6 +1421,21 @@
};
};
+
+ mdio0: mdio@37000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "qcom,ipq8064-mdio", "syscon";
+ reg = <0x37000000 0x200000>;
+ resets = <&gcc GMAC_CORE1_RESET>;
+ reset-names = "stmmaceth";
+ clocks = <&gcc GMAC_CORE1_CLK>;
+ clock-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
vsdcc_fixed: vsdcc-regulator {
compatible = "regulator-fixed";
regulator-name = "SDCC Power";
@@ -1258,4 +1510,17 @@
};
};
};
+
+ sfpb_mutex: sfpb-mutex {
+ compatible = "qcom,sfpb-mutex";
+ syscon = <&sfpb_mutex_block 4 4>;
+
+ #hwlock-cells = <1>;
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem>;
+ hwlocks = <&sfpb_mutex 3>;
+ };
};
View Git Blame Copy Permalink