openwrt/target/linux/bcm53xx/patches-5.15/030-v5.15-0009-ARM-dts-NSP-...

387 lines
7.6 KiB
Diff

From 702a8f4744ed5b480f2b2411858184afdb10f9fd Mon Sep 17 00:00:00 2001
From: Matthew Hagan <mnhagan88@gmail.com>
Date: Fri, 6 Aug 2021 21:44:35 +0100
Subject: [PATCH] ARM: dts: NSP: Add DT files for Meraki MX65 series
MX65 & MX65W Hardware info:
- CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
- RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
- Storage: 1 GB (Micron MT29F8G08ABACA)
- Networking: BCM58625 switch (2x 1GbE ports)
2x Qualcomm QCA8337 switches (10x 1GbE ports total)
- PSE: Broadcom BCM59111KMLG connected to LAN ports 11 & 12
- USB: 1x USB2.0
- Serial: Internal header
- WLAN(MX65W Only): 2x Broadcom BCM43520KMLG on the PCI bus.
Note that a driver and firmware image for the BCM59111 PSE has been
released under GPL, but this is not present in the kernel.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 279 ++++++++++++++++++
arch/arm/boot/dts/bcm958625-meraki-mx65.dts | 24 ++
arch/arm/boot/dts/bcm958625-meraki-mx65w.dts | 32 ++
4 files changed, 337 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -162,6 +162,8 @@ dtb-$(CONFIG_ARCH_BCM_NSP) += \
bcm958625-meraki-mx64-a0.dtb \
bcm958625-meraki-mx64w.dtb \
bcm958625-meraki-mx64w-a0.dtb \
+ bcm958625-meraki-mx65.dtb \
+ bcm958625-meraki-mx65w.dtb \
bcm958625hr.dtb \
bcm988312hr.dtb \
bcm958625k.dtb
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65 series (Alamo).
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm958625-meraki-mx6x-common.dtsi"
+
+/ {
+ keys {
+ compatible = "gpio-keys-polled";
+ autorepeat;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpioa 8 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ /* green:wan1-left */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
+ };
+
+ led-1 {
+ /* green:wan1-right */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
+ };
+
+ led-2 {
+ /* green:wan2-left */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
+ };
+
+ led-3 {
+ /* green:wan2-right */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <3>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
+ };
+
+ led-4 {
+ /* amber:power */
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ led-5 {
+ /* white:status */
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ mdio-mii-mux {
+ compatible = "mdio-mux-mmioreg";
+ reg = <0x1803f1c0 0x4>;
+ mux-mask = <0x2000>;
+ mdio-parent-bus = <&mdio_ext>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy_port6: phy@0 {
+ reg = <0>;
+ };
+
+ phy_port7: phy@1 {
+ reg = <1>;
+ };
+
+ phy_port8: phy@2 {
+ reg = <2>;
+ };
+
+ phy_port9: phy@3 {
+ reg = <3>;
+ };
+
+ phy_port10: phy@4 {
+ reg = <4>;
+ };
+
+ switch@10 {
+ compatible = "qca,qca8337";
+ reg = <0x10>;
+ dsa,member = <1 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ ethernet = <&sgmii1>;
+ phy-mode = "sgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan8";
+ phy-handle = <&phy_port6>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan9";
+ phy-handle = <&phy_port7>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan10";
+ phy-handle = <&phy_port8>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan11";
+ phy-handle = <&phy_port9>;
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "lan12";
+ phy-handle = <&phy_port10>;
+ };
+ };
+ };
+ };
+
+ mdio-mii@2000 {
+ reg = <0x2000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy_port1: phy@0 {
+ reg = <0>;
+ };
+
+ phy_port2: phy@1 {
+ reg = <1>;
+ };
+
+ phy_port3: phy@2 {
+ reg = <2>;
+ };
+
+ phy_port4: phy@3 {
+ reg = <3>;
+ };
+
+ phy_port5: phy@4 {
+ reg = <4>;
+ };
+
+ switch@10 {
+ compatible = "qca,qca8337";
+ reg = <0x10>;
+ dsa,member = <2 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ ethernet = <&sgmii0>;
+ phy-mode = "sgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+ phy-handle = <&phy_port1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan4";
+ phy-handle = <&phy_port2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan5";
+ phy-handle = <&phy_port3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan6";
+ phy-handle = <&phy_port4>;
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "lan7";
+ phy-handle = <&phy_port5>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&srab {
+ compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+ status = "okay";
+ dsa,member = <0 0>;
+
+ ports {
+ port@0 {
+ label = "wan1";
+ reg = <0>;
+ };
+
+ port@1 {
+ label = "wan2";
+ reg = <1>;
+ };
+
+ sgmii0: port@4 {
+ label = "sw0";
+ reg = <4>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ sgmii1: port@5 {
+ label = "sw1";
+ reg = <5>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@8 {
+ ethernet = <&amac2>;
+ reg = <8>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx65.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-alamo.dtsi"
+
+/ {
+ model = "Cisco Meraki MX65";
+ compatible = "meraki,mx65", "brcm,bcm58625", "brcm,nsp";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65W.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-alamo.dtsi"
+
+/ {
+ model = "Cisco Meraki MX65W";
+ compatible = "meraki,mx65w", "brcm,bcm58625", "brcm,nsp";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};