mirror
/
openwrt
mirror of https://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Releases Activity
openwrt/target/linux/bcm27xx/patches-5.15/950-0577-ARM-dts-Update-rpi...

294 lines
6.2 KiB
Diff
Raw Blame History

From 34e658087e54db26ebd86f86a1549a393002a9ad Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Fri, 26 Nov 2021 15:20:06 +0000
Subject: [PATCH] ARM: dts: Update rpi-400 and cm4 dts to match 4-b
The Pi 4B dts file has had numerous updates since the Pi 400 and CM4
dts files were written. Apply those updates to the other files to
minimise the differences. The change is largely cosmetic, except for
the PCI "device-type" to "device_type" rename, and the correction of
the labels on the Pi 400 GPIO expander pins.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
arch/arm/boot/dts/bcm2711-rpi-400.dts | 90 ++++--------------------
arch/arm/boot/dts/bcm2711-rpi-cm4.dts | 98 ++++++---------------------
2 files changed, 36 insertions(+), 152 deletions(-)
--- a/arch/arm/boot/dts/bcm2711-rpi-400.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-400.dts
@@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "bcm2711.dtsi"
-#include "bcm2835-rpi.dtsi"
-
-#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
+#include "bcm2711-rpi.dtsi"
+//#include "bcm283x-rpi-usb-peripheral.dtsi"
/ {
compatible = "raspberrypi,400", "brcm,bcm2711";
@@ -14,19 +13,6 @@
stdout-path = "serial1:115200n8";
};
- /* Will be filled by the bootloader */
- memory@0 {
- device_type = "memory";
- reg = <0 0 0>;
- };
-
- aliases {
- emmc2bus = &emmc2bus;
- ethernet0 = &genet;
- pcie0 = &pcie0;
- blconfig = &blconfig;
- };
-
leds {
led-act {
gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
@@ -54,8 +40,8 @@
regulator-always-on;
regulator-settling-time-us = <5000>;
gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
- states = <1800000 0x1
- 3300000 0x0>;
+ states = <1800000 0x1>,
+ <3300000 0x0>;
status = "okay";
};
@@ -179,23 +165,13 @@
};
&hdmi0 {
- clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
- clock-names = "hdmi", "bvb", "audio", "cec";
- wifi-2.4ghz-coexistence;
status = "okay";
};
&hdmi1 {
- clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
- clock-names = "hdmi", "bvb", "audio", "cec";
- wifi-2.4ghz-coexistence;
status = "okay";
};
-&hvs {
- clocks = <&firmware_clocks 4>;
-};
-
&pixelvalve0 {
status = "okay";
};
@@ -218,22 +194,6 @@
status = "okay";
};
-&rmem {
- /*
- * RPi4's co-processor will copy the board's bootloader configuration
- * into memory for the OS to consume. It'll also update this node with
- * its placement information.
- */
- blconfig: nvram@0 {
- compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x0 0x0 0x0>;
- no-map;
- status = "disabled";
- };
-};
-
/* SDHCI is used to control the SDIO for wireless */
&sdhci {
#address-cells = <1>;
@@ -274,7 +234,7 @@
&pcie0 {
pci@0,0 {
- device-type = "pci";
+ device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
ranges;
@@ -282,7 +242,7 @@
reg = <0 0 0 0 0>;
usb@0,0 {
- reg = <0x0 0 0 0 0>;
+ reg = <0 0 0 0 0>;
resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
};
};
@@ -309,10 +269,6 @@
status = "okay";
};
-&vchiq {
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-};
-
&vc4 {
status = "okay";
};
--- a/arch/arm/boot/dts/bcm2711-rpi-cm4.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dts
@@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "bcm2711.dtsi"
-#include "bcm2835-rpi.dtsi"
-
-#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
+#include "bcm2711-rpi.dtsi"
+//#include "bcm283x-rpi-usb-peripheral.dtsi"
/ {
compatible = "raspberrypi,4-compute-module", "brcm,bcm2711";
@@ -14,19 +13,6 @@
stdout-path = "serial1:115200n8";
};
- /* Will be filled by the bootloader */
- memory@0 {
- device_type = "memory";
- reg = <0 0 0>;
- };
-
- aliases {
- emmc2bus = &emmc2bus;
- ethernet0 = &genet;
- pcie0 = &pcie0;
- blconfig = &blconfig;
- };
-
leds {
led-act {
gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
@@ -54,8 +40,8 @@
regulator-always-on;
regulator-settling-time-us = <5000>;
gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
- states = <1800000 0x1
- 3300000 0x0>;
+ states = <1800000 0x1>,
+ <3300000 0x0>;
status = "okay";
};
@@ -78,42 +64,26 @@
status = "okay";
};
-&firmware {
- firmware_clocks: clocks {
- compatible = "raspberrypi,firmware-clocks";
- #clock-cells = <1>;
- };
-
- expgpio: gpio {
- compatible = "raspberrypi,firmware-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-line-names = "BT_ON",
- "WL_ON",
- "PWR_LED_OFF",
- "ANT1",
- "VDD_SD_IO_SEL",
- "CAM_GPIO",
- "SD_PWR_ON",
- "ANT2";
- status = "okay";
-
- ant1: ant1 {
- gpio-hog;
- gpios = <3 GPIO_ACTIVE_HIGH>;
- output-high;
- };
-
- ant2: ant2 {
- gpio-hog;
- gpios = <7 GPIO_ACTIVE_HIGH>;
- output-low;
- };
- };
-
- reset: reset {
- compatible = "raspberrypi,firmware-reset";
- #reset-cells = <1>;
+&expgpio {
+ gpio-line-names = "BT_ON",
+ "WL_ON",
+ "PWR_LED_OFF",
+ "ANT1",
+ "VDD_SD_IO_SEL",
+ "CAM_GPIO",
+ "SD_PWR_ON",
+ "ANT2";
+
+ ant1: ant1 {
+ gpio-hog;
+ gpios = <3 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+
+ ant2: ant2 {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ output-low;
};
};
@@ -191,23 +161,13 @@
};
&hdmi0 {
- clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
- clock-names = "hdmi", "bvb", "audio", "cec";
- wifi-2.4ghz-coexistence;
status = "okay";
};
&hdmi1 {
- clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
- clock-names = "hdmi", "bvb", "audio", "cec";
- wifi-2.4ghz-coexistence;
status = "okay";
};
-&hvs {
- clocks = <&firmware_clocks 4>;
-};
-
&pixelvalve0 {
status = "okay";
};
@@ -230,22 +190,6 @@
status = "okay";
};
-&rmem {
- /*
- * RPi4's co-processor will copy the board's bootloader configuration
- * into memory for the OS to consume. It'll also update this node with
- * its placement information.
- */
- blconfig: nvram@0 {
- compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x0 0x0 0x0>;
- no-map;
- status = "disabled";
- };
-};
-
/* SDHCI is used to control the SDIO for wireless */
&sdhci {
#address-cells = <1>;
View Git Blame Copy Permalink