openwrt

History

Aleksander Jan Bajkowski 9226f1e419 kernel: disable CONFIG_CPU_LITTLE_ENDIAN in generic config Endianness depends on CPU architecture. CONFIG_CPU_(BIG/LITTLE)_ENDIAN should be enabled on target or subtarget based on SoC architecture. Fixes warning: $ make kernel_oldconfig CONFIG_TARGET=subtarget ... .config:1008:warning: override: CPU_LITTLE_ENDIAN changes choice state .... Summary: - ARC - only the CONFIG_CPU_BIG_ENDIAN symbol is defined for this architeture. If it is disabled then the processor operates in LITTLE_ENDIAN mode (default), - ARM32 - CONFIG_CPU_LITTLE_ENDIAN symbol available since kernel 5.19. This option should be enabled after OpenWRT moves to kernel 6.x. After refreshing the kernel, the symbol disappears, - ARM64 - enabled CONFIG_CPU_LITTLE_ENDIAN, - MIPS - enabled relevant symbols, - POWERPC - enabled CONFIG_CPU_BIG_ENDIAN, - UML - Symbols are not defined for this architecture, - X86 - always little endian. Symbols are not defined for this architecture. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>		2022-10-21 13:47:01 +02:00
..
32	generic: enable CRYPTO_LIB_BLAKE2S[_X86\|_ARM]	2022-06-24 17:10:24 +02:00
64	kernel: disable CONFIG_CPU_LITTLE_ENDIAN in generic config	2022-10-21 13:47:01 +02:00
base-files/etc	treewide: remove execute bit and shebang from board.d files	2021-03-06 11:30:06 +01:00
image	target: use SPDX license identifiers on Makefiles	2021-02-10 15:47:18 +01:00
Makefile	armvirt: make 5.15 kernel default	2022-09-14 16:45:06 +02:00
README	armvirt: README: rename it from LEDE to OpenWrt	2020-12-14 21:38:10 +00:00
config-5.10	kernel: Activate CONFIG_GPIOLIB in generic configuration	2022-08-10 21:36:17 +02:00
config-5.15	kernel: Activate CONFIG_GPIOLIB in generic configuration	2022-08-10 21:36:17 +02:00

README

This is intended to be used with OpenWrt project to provide image for use with
QEMU ARM virt machine.

Run with qemu-system-arm

	# boot with initramfs embedded in
	qemu-system-arm -nographic -M virt -m 64 -kernel openwrt-armvirt-32-zImage-initramfs

	# boot with accel=kvm
	qemu-system-arm -nographic -M virt,accel=kvm -cpu host -m 64 -kernel
	openwrt-armvirt-32-zImage-initramfs

	# boot with a separate rootfs
	qemu-system-arm -nographic -M virt -m 64 -kernel openwrt-armvirt-32-zImage \
	  -drive file=openwrt-armvirt-32-root.ext4,format=raw,if=virtio -append 'root=/dev/vda rootwait'

	# boot with local dir as rootfs
	qemu-system-arm -nographic -M virt -m 64 -kernel openwrt-armvirt-32-zImage \
	  -fsdev local,id=rootdev,path=root-armvirt/,security_model=none \
	  -device virtio-9p-pci,fsdev=rootdev,mount_tag=/dev/root \
	  -append 'rootflags=trans=virtio,version=9p2000.L,cache=loose rootfstype=9p'

Run with kvmtool

	# start a named machine
	lkvm run -k openwrt-armvirt-32-zImage -i openwrt-armvirt-32-rootfs.cpio --name armvirt0

	# start with virtio-9p rootfs
	lkvm run -k openwrt-armvirt-32-zImage -d root-armvirt/

	# stop "armvirt0"
	lkvm stop --name armvirt0

	# stop all
	lkvm stop --all

The multi-platform ARMv8 target can be used with QEMU:

	qemu-system-aarch64 -machine virt -cpu cortex-a57 -nographic \
		-kernel openwrt-armvirt-64-Image-initramfs \