mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-06-13 18:53:52 +02:00
46a2490e8f
Linksys MX4200 is a 802.11ax Tri-band router/AP. Specifications: * CPU: Qualcomm IPQ8174 Quad core Cortex-A53 1.4GHz * RAM: 512MB of DDR3 * Storage: 512Mb NAND * Ethernet: 4x1G RJ45 ports (QCA8075) * WLAN: * 2.4GHz: Qualcomm QCN5024 2x2 802.11b/g/n/ax 574 Mbps PHY rate * 5GHz: Qualcomm QCN5054 2x2@80MHz or 2x2@160MHz 802.11a/b/g/n/ac/ax 2402 PHY rate * 5GHz: Qualcomm QCN5054 4x4@80MHz or 2x2@160MHz 802.11a/b/g/n/ac/ax 2402 PHY rate * LED-s: * RGB system led * Buttons: 1x Soft reset 1x WPS * Power: 12V DC Jack Installation instructions: Open Linksys Web UI - http://192.168.1.1/ca or http://10.65.1.1/ca depending on your setup. Login with your admin password. The default password can be found on a sticker under the device. To enter into the support mode, click on the “CA” link and the bottom of the page. Open the “Connectivity” menu and upload the squash-factory image with the “Choose file” button. Click start. Ignore all the prompts and warnings by click “yes” in all the popups. The Wifi radios are turned off by default. To configure the router, you will need to connect your computer to the LAN port of the device. Then you would need to write openwrt to the other partition for it to work - First Check booted partition fw_printenv -n boot_part - Then install Openwrt to the other partition if booted in slot 1: mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4200v(X)-squashfs-factory.bin alt_kernel - If in slot 2: mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4200v(X)-squashfs-factory.bin kernel Replace (X) with your model version either 1 or 2 Signed-off-by: Mohammad Sayful Islam <sayf.mohammad01@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
324 lines
8.6 KiB
Makefile
324 lines
8.6 KiB
Makefile
define Device/FitImage
|
|
KERNEL_SUFFIX := -uImage.itb
|
|
KERNEL = kernel-bin | libdeflate-gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
|
|
KERNEL_NAME := Image
|
|
endef
|
|
|
|
define Device/FitImageLzma
|
|
KERNEL_SUFFIX := -uImage.itb
|
|
KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
|
|
KERNEL_NAME := Image
|
|
endef
|
|
|
|
define Device/EmmcImage
|
|
IMAGES += factory.bin sysupgrade.bin
|
|
IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k
|
|
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | sysupgrade-tar rootfs=$$$$@ | append-metadata
|
|
endef
|
|
|
|
define Device/UbiFit
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES := factory.ubi sysupgrade.bin
|
|
IMAGE/factory.ubi := append-ubi
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
|
|
define Build/wax6xx-netgear-tar
|
|
mkdir $@.tmp
|
|
mv $@ $@.tmp/nand-ipq807x-apps.img
|
|
md5sum $@.tmp/nand-ipq807x-apps.img | cut -c 1-32 > $@.tmp/nand-ipq807x-apps.md5sum
|
|
echo $(DEVICE_MODEL) > $@.tmp/metadata.txt
|
|
echo $(DEVICE_MODEL)"_V9.9.9.9" > $@.tmp/version
|
|
tar -C $@.tmp/ -cf $@ .
|
|
rm -rf $@.tmp
|
|
endef
|
|
|
|
define Device/arcadyan_aw1000
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Arcadyan
|
|
DEVICE_MODEL := AW1000
|
|
BLOCKSIZE := 256k
|
|
PAGESIZE := 4096
|
|
DEVICE_DTS_CONFIG := config@hk09
|
|
SOC := ipq8072
|
|
DEVICE_PACKAGES := ipq-wifi-arcadyan_aw1000 kmod-spi-gpio \
|
|
kmod-gpio-nxp-74hc164 kmod-usb-serial-option uqmi
|
|
endef
|
|
TARGET_DEVICES += arcadyan_aw1000
|
|
|
|
define Device/buffalo_wxr-5950ax12
|
|
$(call Device/FitImage)
|
|
DEVICE_VENDOR := Buffalo
|
|
DEVICE_MODEL := WXR-5950AX12
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_DTS_CONFIG := config@hk01
|
|
SOC := ipq8074
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
DEVICE_PACKAGES := ipq-wifi-buffalo_wxr-5950ax12
|
|
endef
|
|
TARGET_DEVICES += buffalo_wxr-5950ax12
|
|
|
|
define Device/compex_wpq873
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Compex
|
|
DEVICE_MODEL := WPQ873
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_DTS_CONFIG := config@hk09.wpq873
|
|
SOC := ipq8072
|
|
DEVICE_PACKAGES := ipq-wifi-compex_wpq873
|
|
IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand
|
|
endef
|
|
TARGET_DEVICES += compex_wpq873
|
|
|
|
define Device/dynalink_dl-wrx36
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Dynalink
|
|
DEVICE_MODEL := DL-WRX36
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_DTS_CONFIG := config@rt5010w-d350-rev0
|
|
SOC := ipq8072
|
|
DEVICE_PACKAGES := ipq-wifi-dynalink_dl-wrx36
|
|
endef
|
|
TARGET_DEVICES += dynalink_dl-wrx36
|
|
|
|
define Device/edgecore_eap102
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Edgecore
|
|
DEVICE_MODEL := EAP102
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_DTS_CONFIG := config@ac02
|
|
SOC := ipq8071
|
|
DEVICE_PACKAGES := ipq-wifi-edgecore_eap102
|
|
IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand
|
|
endef
|
|
TARGET_DEVICES += edgecore_eap102
|
|
|
|
define Device/edimax_cax1800
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Edimax
|
|
DEVICE_MODEL := CAX1800
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_DTS_CONFIG := config@ac03
|
|
SOC := ipq8070
|
|
DEVICE_PACKAGES := ipq-wifi-edimax_cax1800
|
|
endef
|
|
TARGET_DEVICES += edimax_cax1800
|
|
|
|
define Device/linksys_mx4200v1
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := MX4200
|
|
DEVICE_VARIANT := v1
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 6144k
|
|
IMAGE_SIZE := 147456k
|
|
NAND_SIZE := 512m
|
|
KERNEL_IN_UBI :=
|
|
SOC := ipq8174
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MX4200
|
|
DEVICE_PACKAGES := kmod-leds-pca963x ipq-wifi-linksys_mx4200 kmod-bluetooth
|
|
endef
|
|
TARGET_DEVICES += linksys_mx4200v1
|
|
|
|
define Device/linksys_mx4200v2
|
|
$(call Device/linksys_mx4200v1)
|
|
DEVICE_VARIANT := v2
|
|
endef
|
|
TARGET_DEVICES += linksys_mx4200v2
|
|
|
|
define Device/netgear_rax120v2
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Netgear
|
|
DEVICE_MODEL := RAX120v2
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_DTS_CONFIG := config@hk01
|
|
SOC := ipq8074
|
|
KERNEL_SIZE := 29696k
|
|
NETGEAR_BOARD_ID := RAX120
|
|
NETGEAR_HW_ID := 29765589+0+512+1024+4x4+8x8
|
|
DEVICE_PACKAGES := ipq-wifi-netgear_rax120v2 kmod-spi-gpio \
|
|
kmod-spi-bitbang kmod-gpio-nxp-74hc164 kmod-hwmon-g761
|
|
IMAGES = web-ui-factory.img sysupgrade.bin
|
|
IMAGE/web-ui-factory.img := append-image initramfs-uImage.itb | \
|
|
pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | \
|
|
netgear-dni
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
|
|
append-uImage-fakehdr filesystem | sysupgrade-tar kernel=$$$$@ | \
|
|
append-metadata
|
|
endef
|
|
TARGET_DEVICES += netgear_rax120v2
|
|
|
|
define Device/netgear_wax218
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Netgear
|
|
DEVICE_MODEL := WAX218
|
|
DEVICE_DTS_CONFIG := config@hk07
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
SOC := ipq8072
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS := web-ui-factory.fit
|
|
ARTIFACT/web-ui-factory.fit := append-image initramfs-uImage.itb | \
|
|
ubinize-kernel | qsdk-ipq-factory-nand
|
|
endif
|
|
DEVICE_PACKAGES := kmod-spi-gpio kmod-spi-bitbang kmod-gpio-nxp-74hc164 \
|
|
ipq-wifi-netgear_wax218
|
|
endef
|
|
TARGET_DEVICES += netgear_wax218
|
|
|
|
define Device/netgear_wax620
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Netgear
|
|
DEVICE_MODEL := WAX620
|
|
DEVICE_DTS_CONFIG := config@hk07
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
SOC := ipq8072
|
|
DEVICE_PACKAGES += kmod-spi-gpio kmod-gpio-nxp-74hc164 \
|
|
ipq-wifi-netgear_wax620
|
|
endef
|
|
TARGET_DEVICES += netgear_wax620
|
|
|
|
define Device/netgear_wax630
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Netgear
|
|
DEVICE_MODEL := WAX630
|
|
DEVICE_DTS_CONFIG := config@hk01
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
SOC := ipq8074
|
|
IMAGES := ui-factory.tar factory.ubi sysupgrade.bin
|
|
IMAGE/ui-factory.tar := append-ubi | wax6xx-netgear-tar
|
|
DEVICE_PACKAGES += kmod-spi-gpio ipq-wifi-netgear_wax630
|
|
endef
|
|
TARGET_DEVICES += netgear_wax630
|
|
|
|
define Device/prpl_haze
|
|
$(call Device/FitImage)
|
|
$(call Device/EmmcImage)
|
|
DEVICE_VENDOR := prpl Foundation
|
|
DEVICE_MODEL := Haze
|
|
DEVICE_DTS_CONFIG := config@hk09
|
|
SOC := ipq8072
|
|
DEVICE_PACKAGES += ath11k-firmware-qcn9074 ipq-wifi-prpl_haze kmod-ath11k-pci \
|
|
mkf2fs f2fsck kmod-fs-f2fs
|
|
endef
|
|
TARGET_DEVICES += prpl_haze
|
|
|
|
define Device/qnap_301w
|
|
$(call Device/FitImage)
|
|
$(call Device/EmmcImage)
|
|
DEVICE_VENDOR := QNAP
|
|
DEVICE_MODEL := 301w
|
|
DEVICE_DTS_CONFIG := config@hk01
|
|
KERNEL_SIZE := 16384k
|
|
SOC := ipq8072
|
|
DEVICE_PACKAGES += ipq-wifi-qnap_301w
|
|
endef
|
|
TARGET_DEVICES += qnap_301w
|
|
|
|
define Device/redmi_ax6
|
|
$(call Device/xiaomi_ax3600)
|
|
DEVICE_VENDOR := Redmi
|
|
DEVICE_MODEL := AX6
|
|
DEVICE_PACKAGES := ipq-wifi-redmi_ax6
|
|
endef
|
|
TARGET_DEVICES += redmi_ax6
|
|
|
|
define Device/xiaomi_ax3600
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := AX3600
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_DTS_CONFIG := config@ac04
|
|
SOC := ipq8071
|
|
KERNEL_SIZE := 36608k
|
|
DEVICE_PACKAGES := ipq-wifi-xiaomi_ax3600 kmod-ath10k-ct-smallbuffers ath10k-firmware-qca9887-ct
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS := initramfs-factory.ubi
|
|
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-uImage.itb | ubinize-kernel
|
|
endif
|
|
endef
|
|
TARGET_DEVICES += xiaomi_ax3600
|
|
|
|
define Device/xiaomi_ax9000
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := AX9000
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_DTS_CONFIG := config@hk14
|
|
SOC := ipq8072
|
|
KERNEL_SIZE := 57344k
|
|
DEVICE_PACKAGES := ipq-wifi-xiaomi_ax9000 kmod-ath11k-pci ath11k-firmware-qcn9074 \
|
|
kmod-ath10k-ct ath10k-firmware-qca9887-ct
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS := initramfs-factory.ubi
|
|
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-uImage.itb | ubinize-kernel
|
|
endif
|
|
endef
|
|
TARGET_DEVICES += xiaomi_ax9000
|
|
|
|
define Device/yuncore_ax880
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Yuncore
|
|
DEVICE_MODEL := AX880
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_DTS_CONFIG := config@hk09
|
|
SOC := ipq8072
|
|
DEVICE_PACKAGES := ipq-wifi-yuncore_ax880
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
|
|
endef
|
|
TARGET_DEVICES += yuncore_ax880
|
|
|
|
define Device/zte_mf269
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := ZTE
|
|
DEVICE_MODEL := MF269
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_DTS_CONFIG := config@ac04
|
|
SOC := ipq8071
|
|
KERNEL_SIZE := 53248k
|
|
DEVICE_PACKAGES := ipq-wifi-zte_mf269
|
|
endef
|
|
TARGET_DEVICES += zte_mf269
|
|
|
|
define Device/zyxel_nbg7815
|
|
$(call Device/FitImage)
|
|
$(call Device/EmmcImage)
|
|
DEVICE_VENDOR := ZYXEL
|
|
DEVICE_MODEL := NBG7815
|
|
DEVICE_DTS_CONFIG := config@nbg7815
|
|
SOC := ipq8074
|
|
DEVICE_PACKAGES += ipq-wifi-zyxel_nbg7815 kmod-ath11k-pci \
|
|
kmod-bluetooth kmod-hwmon-tmp103
|
|
endef
|
|
TARGET_DEVICES += zyxel_nbg7815
|