Robert Marko 4488b260a0 ipq40xx: add Edgecore ECW5211 support ... This patch adds support for the Edgecore ECW5211 indoor AP. Specification: - SoC: Qualcomm Atheros IPQ4018 ARMv7-A 4x Cortex A-7 - RAM: 256MB DDR3 - NOR Flash: 16MB SPI NOR - NAND Flash: 128MB MX35LFxGE4AB SPI-NAND - Ethernet: 2 x 1G via Q8075 PHY connected to ethernet adapter via PSGMII (802.3af POE IN on eth0) - USB: 1 x USB 3.0 SuperSpeed - WLAN: Built-in IPQ4018 (2x2 802.11bng, 2x2 802.11 acn) - CC2540 BLE connected to USB 2.0 port - Atmel AT97SC3205T I2C TPM Signed-off-by: Robert Marko <robert.marko@sartura.hr>		2020-09-17 08:43:03 +02:00
..
base-files	ipq40xx: add Edgecore ECW5211 support	2020-09-17 08:43:03 +02:00
files/arch/arm/boot/dts	ipq40xx: add Edgecore ECW5211 support	2020-09-17 08:43:03 +02:00
files-5.4/drivers/net/ethernet/qualcomm/essedma	ipq40xx: essedma: enable VLAN tag offload for single-port	2020-09-11 17:37:11 +02:00
generic	ipqx0xx: add Generic subtarget	2019-08-22 21:15:28 +02:00
image	ipq40xx: add Edgecore ECW5211 support	2020-09-17 08:43:03 +02:00
patches-4.19	ipq40xx: fix patches on dts Makefile	2020-07-08 17:50:12 +02:00
patches-5.4	ipq40xx: add Edgecore ECW5211 support	2020-09-17 08:43:03 +02:00
profiles	ipq40xx: add target	2018-03-14 19:04:50 +01:00
config-4.19	kernel: unify CONFIG_GPIO_SYSFS in kernel configs	2020-08-06 12:37:04 +02:00
config-5.4	ipq40xx: refresh kernel 5.4 config	2020-08-06 12:51:51 +02:00
Makefile	treewide: use wpad-basic-wolfssl as default	2020-08-20 14:19:39 +02:00