237 lines
5.7 KiB
Diff
237 lines
5.7 KiB
Diff
From 57250281004e141dff4662d1abb3f31982ec01ee Mon Sep 17 00:00:00 2001
|
|
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
Date: Tue, 19 May 2020 13:35:17 +0100
|
|
Subject: [PATCH] dtoverlays: Add an overlay for the Sony IMX290
|
|
image sensor
|
|
|
|
Adds an overlay to configure the IMX290 image sensor.
|
|
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
---
|
|
arch/arm/boot/dts/overlays/Makefile | 1 +
|
|
arch/arm/boot/dts/overlays/README | 16 ++
|
|
arch/arm/boot/dts/overlays/imx290-overlay.dts | 32 ++++
|
|
.../boot/dts/overlays/imx290_327-overlay.dtsi | 145 ++++++++++++++++++
|
|
4 files changed, 194 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/overlays/imx290-overlay.dts
|
|
create mode 100644 arch/arm/boot/dts/overlays/imx290_327-overlay.dtsi
|
|
|
|
--- a/arch/arm/boot/dts/overlays/Makefile
|
|
+++ b/arch/arm/boot/dts/overlays/Makefile
|
|
@@ -85,6 +85,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
|
|
i2s-gpio28-31.dtbo \
|
|
ilitek251x.dtbo \
|
|
imx219.dtbo \
|
|
+ imx290.dtbo \
|
|
imx477.dtbo \
|
|
iqaudio-codec.dtbo \
|
|
iqaudio-dac.dtbo \
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -1430,6 +1430,22 @@ Load: dtoverlay=imx219
|
|
Params: <None>
|
|
|
|
|
|
+Name: imx290
|
|
+Info: Sony IMX290 camera module.
|
|
+ Uses Unicam 1, which is the standard camera connector on most Pi
|
|
+ variants. NB This currently uses 4 CSI2 data lanes and therefore will
|
|
+ only work on a CM.
|
|
+Load: dtoverlay=imx290,<param>
|
|
+Params: 4lane Enable 4 CSI2 lanes. This requires a Compute
|
|
+ Module (1, 3, or 4).
|
|
+ clock-frequency Sets the clock frequency to match that used on
|
|
+ the board.
|
|
+ Modules from Vision Components use 37.125MHz
|
|
+ (the default), whilst those from Innomaker use
|
|
+ 74.25MHz.
|
|
+ mono Denote that the module is a mono sensor.
|
|
+
|
|
+
|
|
Name: imx477
|
|
Info: Sony IMX477 camera module.
|
|
Uses Unicam 1, which is the standard camera connector on most Pi
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/imx290-overlay.dts
|
|
@@ -0,0 +1,32 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-only
|
|
+// Definitions for IMX290 camera module on VC I2C bus
|
|
+/dts-v1/;
|
|
+/plugin/;
|
|
+
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+#include "imx290_327-overlay.dtsi"
|
|
+
|
|
+/{
|
|
+ compatible = "brcm,bcm2835";
|
|
+
|
|
+ // Fragment numbers deliberately high to avoid conflicts with the
|
|
+ // included imx290_327 overlay file.
|
|
+
|
|
+ fragment@101 {
|
|
+ target = <&imx290>;
|
|
+ __overlay__ {
|
|
+ compatible = "sony,imx290";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@102 {
|
|
+ target = <&imx290>;
|
|
+ __dormant__ {
|
|
+ compatible = "sony,imx290-mono";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ __overrides__ {
|
|
+ mono = <0>, "-101+102";
|
|
+ };
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/imx290_327-overlay.dtsi
|
|
@@ -0,0 +1,145 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-only
|
|
+// Partial definitions for IMX290 or IMX327 camera module on VC I2C bus
|
|
+// The compatible string should be set in an overlay that then includes this one
|
|
+/dts-v1/;
|
|
+/plugin/;
|
|
+
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+
|
|
+/{
|
|
+ compatible = "brcm,bcm2835";
|
|
+
|
|
+ fragment@0 {
|
|
+ target = <&i2c_csi_dsi>;
|
|
+ __overlay__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ status = "okay";
|
|
+
|
|
+ imx290: imx290@1a {
|
|
+ reg = <0x1a>;
|
|
+ status = "okay";
|
|
+
|
|
+ clocks = <&imx290_clk>;
|
|
+ clock-names = "xclk";
|
|
+ clock-frequency = <37125000>;
|
|
+
|
|
+ vdda-supply = <&imx290_vdda>; /* 2.8v */
|
|
+ vdddo-supply = <&imx290_vdddo>; /* 1.8v */
|
|
+ vddd-supply = <&imx290_vddd>; /* 1.5v */
|
|
+
|
|
+ port {
|
|
+ imx290_0: endpoint {
|
|
+ remote-endpoint = <&csi1_ep>;
|
|
+ clock-lanes = <0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@1 {
|
|
+ target = <&csi1>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
+
|
|
+ port {
|
|
+ csi1_ep: endpoint {
|
|
+ remote-endpoint = <&imx290_0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@2 {
|
|
+ target = <&i2c0if>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@3 {
|
|
+ target-path="/";
|
|
+ __overlay__ {
|
|
+ imx290_vdda: fixedregulator@0 {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "imx290_vdda";
|
|
+ regulator-min-microvolt = <2800000>;
|
|
+ regulator-max-microvolt = <2800000>;
|
|
+ gpio = <&gpio 41 GPIO_ACTIVE_HIGH>;
|
|
+ enable-active-high;
|
|
+ };
|
|
+ imx290_vdddo: fixedregulator@1 {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "imx290_vdddo";
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ };
|
|
+ imx290_vddd: fixedregulator@2 {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "imx290_vddd";
|
|
+ regulator-min-microvolt = <1500000>;
|
|
+ regulator-max-microvolt = <1500000>;
|
|
+ };
|
|
+
|
|
+ imx290_clk: camera-clk {
|
|
+ compatible = "fixed-clock";
|
|
+ #clock-cells = <0>;
|
|
+ clock-frequency = <37125000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@4 {
|
|
+ target = <&i2c0mux>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@5 {
|
|
+ target-path="/__overrides__";
|
|
+ __overlay__ {
|
|
+ cam0-pwdn-ctrl = <&imx290_vdda>,"gpio:0";
|
|
+ cam0-pwdn = <&imx290_vdda>,"gpio:4";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@6 {
|
|
+ target = <&imx290_0>;
|
|
+ __overlay__ {
|
|
+ data-lanes = <1 2>;
|
|
+ link-frequencies =
|
|
+ /bits/ 64 <445500000 297000000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@7 {
|
|
+ target = <&imx290_0>;
|
|
+ __dormant__ {
|
|
+ data-lanes = <1 2 3 4>;
|
|
+ link-frequencies =
|
|
+ /bits/ 64 <222750000 148500000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@8 {
|
|
+ target = <&csi1_ep>;
|
|
+ __overlay__ {
|
|
+ data-lanes = <1 2>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@9 {
|
|
+ target = <&csi1_ep>;
|
|
+ __dormant__ {
|
|
+ data-lanes = <1 2 3 4>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ __overrides__ {
|
|
+ 4lane = <0>, "-6+7-8+9";
|
|
+ clock-frequency = <&imx290_clk>,"clock-frequency:0",
|
|
+ <&imx290>,"clock-frequency:0";
|
|
+ };
|
|
+};
|