396 lines
12 KiB
Makefile
396 lines
12 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0-only
|
|
#
|
|
# Copyright (C) 2009-2013 OpenWrt.org
|
|
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
|
|
KERNEL_LOADADDR:=0x8000
|
|
|
|
# Some info about Ctera firmware:
|
|
# 1. It's simple tar file (GNU standard), but it must have ".firm" suffix.
|
|
# 2. It contains two images: kernel and romdisk. Both are required.
|
|
# 3. Every image has header and trailer file.
|
|
# 4. The struct of tar firmware is: header kernel trailer header romdisk trailer
|
|
# 5. In header file are some strings used to describe image. It was decoded from
|
|
# factory image.
|
|
# 6. Version format in header file is restricted by Original FW.
|
|
# 7. Trailer file contains MD5 sum string of header and image file.
|
|
# 8. Firmware file must have <=24MB size.
|
|
|
|
define Build/ctera-firmware
|
|
mkdir -p $@.tmp
|
|
|
|
# Prepare header and trailer file for kernel
|
|
echo "# CTera firmware information file" > $@.tmp/header
|
|
echo "image_type=kernel" >> $@.tmp/header
|
|
echo "arch=Kirkwood" >> $@.tmp/header
|
|
echo "board=Any" >> $@.tmp/header
|
|
echo "version=3.1.22.30669" >> $@.tmp/header
|
|
echo "kernel_cmd=console=ttyS0,115200 earlyprintk" >> $@.tmp/header
|
|
echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \
|
|
>> $@.tmp/header
|
|
|
|
cp $@ $@.tmp/kernel
|
|
|
|
echo "MD5=$$(cat $@.tmp/header $@.tmp/kernel | $(MKHASH) md5)" \
|
|
> $@.tmp/trailer
|
|
|
|
tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
|
|
-H gnu -C $@.tmp -cf $@.tar header kernel trailer
|
|
|
|
# Prepare header and trailer file for fake romdisk
|
|
echo "# CTera firmware information file" > $@.tmp/header
|
|
echo "image_type=romdisk" >> $@.tmp/header
|
|
echo "initrd=yes" >> $@.tmp/header
|
|
echo "arch=Kirkwood" >> $@.tmp/header
|
|
echo "board=Any" >> $@.tmp/header
|
|
echo "version=3.1.22.30669" >> $@.tmp/header
|
|
echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \
|
|
>> $@.tmp/header
|
|
|
|
rm -f $@
|
|
touch $@
|
|
$(call Build/append-uImage-fakehdr, ramdisk)
|
|
cp $@ $@.tmp/romdisk
|
|
|
|
echo "MD5=$$(cat $@.tmp/header $@.tmp/romdisk | $(MKHASH) md5)" \
|
|
> $@.tmp/trailer
|
|
|
|
tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
|
|
-H gnu -C $@.tmp -rf $@.tar header romdisk trailer
|
|
|
|
mv $@.tar $@
|
|
rm -rf $@.tmp
|
|
endef
|
|
|
|
define Device/kernel-size-migration-iomega
|
|
DEVICE_COMPAT_VERSION := 2.0
|
|
DEVICE_COMPAT_MESSAGE := \n$\
|
|
!The partitioning of the router has changed! \n$\
|
|
Partition design has changed compared to \
|
|
older versions (up to 23.05) due to kernel size restrictions. \
|
|
Upgrade via sysupgrade mechanism is not possible, so new \
|
|
installation via initramfs image is required.\n$\
|
|
Please adjust bootcmd in u-boot console:\n$\
|
|
setenv bootcmd \
|
|
'setenv bootargs $$$${console} $$$${mtdparts} $$$${bootargs_root}; \
|
|
nand read.e 0x800000 0x100000 0x400000; bootm 0x00800000'\n$\
|
|
saveenv\n$\
|
|
or use OpenWrt shell:\n$\
|
|
fw_setenv bootcmd \
|
|
"setenv bootargs $$$${console} $$$${mtdparts} $$$${bootargs_root};\
|
|
nand read.e 0x800000 0x100000 0x400000; bootm 0x00800000"\n$\
|
|
and reinstall image with initramfs image. \
|
|
Please see original instructions for more details.
|
|
endef
|
|
|
|
define Device/kernel-size-migration-linksys
|
|
DEVICE_COMPAT_VERSION := 3.0
|
|
DEVICE_COMPAT_MESSAGE := \n$\
|
|
!The partitioning of the router has changed! \n$\
|
|
Partition design has changed compared to \
|
|
older versions (up to 23.05) due to kernel size restrictions. \n$\
|
|
Upgrade via sysupgrade mechanism is not possible, so u-boot args \
|
|
adjustment and new installation via factory style image is required. \n$\
|
|
Upgrade instructions: \n$\
|
|
2. Run folowing commands in console (ssh or serial): \n$\
|
|
\t fw_printenv \n$\
|
|
\t fw_setenv nandboot \
|
|
"$$$$(fw_printenv nandboot | awk -F= '{sub(/^nandboot=/, "");print}' \
|
|
| sed 's/0x300000/0x400000/g')"\n$\
|
|
\t fw_setenv altnandboot \
|
|
"$$$$(fw_printenv altnandboot | awk -F= '{sub(/^altnandboot=/, "");print}' \
|
|
| sed 's/0x300000/0x400000/g')"\n$\
|
|
3. Test if envs are ok by 'fw_printenv'. \
|
|
It should be the same except last argument of\
|
|
'nand read.e' in 'nandboot' and 'altnandboot'.\n$\
|
|
4. If envs are ok, please apply FACTORY image with command:\n$\
|
|
\t sysupgrade -F -n OPENWRT_FACTORY_IMAGE.bin \n$\
|
|
5. System should start normally. If not, serial console will be required.
|
|
endef
|
|
|
|
define Device/Default
|
|
PROFILES := Default
|
|
ifdef CONFIG_LINUX_6_6
|
|
DEVICE_DTS_DIR := $(DTS_DIR)/marvell
|
|
endif
|
|
DEVICE_DTS = kirkwood-$(lastword $(subst _, ,$(1)))
|
|
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
|
|
KERNEL := kernel-bin | append-dtb | uImage none
|
|
KERNEL_NAME := zImage
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL_IN_UBI := 1
|
|
|
|
PAGESIZE := 2048
|
|
SUBPAGESIZE := 512
|
|
BLOCKSIZE := 128k
|
|
IMAGES := sysupgrade.bin factory.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/factory.bin := append-ubi
|
|
endef
|
|
|
|
define Device/checkpoint_l-50
|
|
DEVICE_VENDOR := Check Point
|
|
DEVICE_MODEL := L-50
|
|
DEVICE_PACKAGES := kmod-ath9k kmod-gpio-button-hotplug kmod-mvsdio \
|
|
kmod-rtc-s35390a kmod-usb-ledtrig-usbport wpad-basic-mbedtls
|
|
IMAGES := sysupgrade.bin
|
|
endef
|
|
TARGET_DEVICES += checkpoint_l-50
|
|
|
|
define Device/cisco_on100
|
|
DEVICE_VENDOR := Cisco Systems
|
|
DEVICE_MODEL := ON100
|
|
KERNEL_SIZE := 5376k
|
|
KERNEL_IN_UBI :=
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
|
|
DEVICE_PACKAGES := kmod-mvsdio kmod-rtc-mv
|
|
SUPPORTED_DEVICES += on100
|
|
endef
|
|
TARGET_DEVICES += cisco_on100
|
|
|
|
define Device/cloudengines_pogoe02
|
|
DEVICE_VENDOR := Cloud Engines
|
|
DEVICE_MODEL := Pogoplug E02
|
|
DEVICE_DTS := kirkwood-pogo_e02
|
|
DEVICE_PACKAGES := kmod-rtc-mv
|
|
SUPPORTED_DEVICES += pogo_e02
|
|
endef
|
|
TARGET_DEVICES += cloudengines_pogoe02
|
|
|
|
define Device/cloudengines_pogoplugv4
|
|
DEVICE_VENDOR := Cloud Engines
|
|
DEVICE_MODEL := Pogoplug V4
|
|
DEVICE_DTS := kirkwood-pogoplug-series-4
|
|
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-mvsdio kmod-usb3 \
|
|
kmod-gpio-button-hotplug kmod-rtc-mv
|
|
endef
|
|
TARGET_DEVICES += cloudengines_pogoplugv4
|
|
|
|
define Device/ctera_c200-v1
|
|
DEVICE_VENDOR := Ctera
|
|
DEVICE_MODEL := C200
|
|
DEVICE_VARIANT := V1
|
|
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-gpio-button-hotplug \
|
|
kmod-hwmon-lm63 kmod-rtc-s35390a kmod-usb-ledtrig-usbport
|
|
KERNEL := kernel-bin | append-dtb | uImage none | ctera-firmware
|
|
KERNEL_IN_UBI :=
|
|
KERNEL_SUFFIX := -factory.firm
|
|
IMAGES := sysupgrade.bin
|
|
endef
|
|
TARGET_DEVICES += ctera_c200-v1
|
|
|
|
define Device/endian_4i-edge-200
|
|
DEVICE_VENDOR := Endian
|
|
DEVICE_MODEL := 4i Edge 200
|
|
DEVICE_ALT0_VENDOR := Endian
|
|
DEVICE_ALT0_MODEL := UTM Mini Firewall
|
|
DEVICE_PACKAGES := kmod-ath9k kmod-mvsdio wpad-basic-mbedtls kmod-rtc-mv
|
|
KERNEL_SIZE := 4096k
|
|
IMAGES := sysupgrade.bin
|
|
endef
|
|
TARGET_DEVICES += endian_4i-edge-200
|
|
|
|
define Device/globalscale_sheevaplug
|
|
DEVICE_VENDOR := Globalscale
|
|
DEVICE_MODEL := Sheevaplug
|
|
DEVICE_PACKAGES := kmod-mvsdio kmod-rtc-mv
|
|
endef
|
|
TARGET_DEVICES += globalscale_sheevaplug
|
|
|
|
define Device/iom_iconnect-1.1
|
|
DEVICE_VENDOR := Iomega
|
|
DEVICE_MODEL := Iconnect
|
|
DEVICE_PACKAGES := kmod-rtc-mv
|
|
DEVICE_DTS := kirkwood-iconnect
|
|
SUPPORTED_DEVICES += iconnect
|
|
endef
|
|
TARGET_DEVICES += iom_iconnect-1.1
|
|
|
|
define Device/iom_ix2-200
|
|
$(Device/kernel-size-migration-iomega)
|
|
DEVICE_VENDOR := Iomega
|
|
DEVICE_MODEL := StorCenter ix2-200
|
|
DEVICE_DTS := kirkwood-iomega_ix2_200
|
|
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
|
|
kmod-gpio-button-hotplug kmod-hwmon-lm63 kmod-rtc-mv
|
|
PAGESIZE := 512
|
|
SUBPAGESIZE := 256
|
|
BLOCKSIZE := 16k
|
|
KERNEL_SIZE := 4096k
|
|
KERNEL_IN_UBI :=
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGE_SIZE := 31744k
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
endef
|
|
TARGET_DEVICES += iom_ix2-200
|
|
|
|
define Device/iom_ix4-200d
|
|
$(Device/kernel-size-migration-iomega)
|
|
DEVICE_VENDOR := Iomega
|
|
DEVICE_MODEL := StorCenter ix4-200d
|
|
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
|
|
kmod-gpio-button-hotplug kmod-gpio-nxp-74hc164 \
|
|
kmod-hwmon-adt7475 kmod-mvsdio kmod-spi-gpio kmod-rtc-mv
|
|
PAGESIZE := 512
|
|
SUBPAGESIZE := 256
|
|
BLOCKSIZE := 16k
|
|
KERNEL_SIZE := 4096k
|
|
KERNEL_IN_UBI :=
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGE_SIZE := 31744k
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
endef
|
|
TARGET_DEVICES += iom_ix4-200d
|
|
|
|
define Device/iptime_nas1
|
|
DEVICE_VENDOR := ipTIME
|
|
DEVICE_MODEL := NAS1
|
|
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
|
|
kmod-gpio-button-hotplug kmod-gpio-pca953x kmod-hwmon-drivetemp \
|
|
kmod-hwmon-gpiofan kmod-usb-ledtrig-usbport kmod-rtc-mv kmod-thermal \
|
|
-uboot-envtools
|
|
KERNEL := $$(KERNEL) | iptime-naspkg nas1
|
|
BLOCKSIZE := 256k
|
|
IMAGE_SIZE := 15872k
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
|
|
check-size | append-metadata
|
|
endef
|
|
TARGET_DEVICES += iptime_nas1
|
|
|
|
define Device/linksys
|
|
$(Device/kernel-size-migration-linksys)
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_PACKAGES := kmod-mwl8k wpad-basic-mbedtls kmod-gpio-button-hotplug \
|
|
kmod-rtc-mv
|
|
KERNEL_IN_UBI :=
|
|
KERNEL_SIZE := 4096k
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
|
|
endef
|
|
|
|
define Device/linksys_e4200-v2
|
|
$(Device/linksys)
|
|
DEVICE_MODEL := E4200
|
|
DEVICE_VARIANT := v2
|
|
SUPPORTED_DEVICES += linksys,viper linksys-viper
|
|
endef
|
|
TARGET_DEVICES += linksys_e4200-v2
|
|
|
|
define Device/linksys_ea3500
|
|
$(Device/linksys)
|
|
DEVICE_MODEL := EA3500
|
|
PAGESIZE := 512
|
|
SUBPAGESIZE := 256
|
|
BLOCKSIZE := 16k
|
|
SUPPORTED_DEVICES += linksys,audi linksys-audi
|
|
endef
|
|
TARGET_DEVICES += linksys_ea3500
|
|
|
|
define Device/linksys_ea4500
|
|
$(Device/linksys)
|
|
DEVICE_MODEL := EA4500
|
|
SUPPORTED_DEVICES += linksys,viper linksys-viper
|
|
endef
|
|
TARGET_DEVICES += linksys_ea4500
|
|
|
|
define Device/netgear_readynas-duo-v2
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := ReadyNAS Duo
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_DTS := kirkwood-netgear_readynas_duo_v2
|
|
KERNEL_IN_UBI :=
|
|
IMAGES := sysupgrade.bin
|
|
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
|
|
kmod-gpio-button-hotplug kmod-hwmon-g762 kmod-rtc-rs5c372a kmod-usb3
|
|
endef
|
|
TARGET_DEVICES += netgear_readynas-duo-v2
|
|
|
|
define Device/netgear_stora
|
|
DEVICE_VENDOR := Netgear
|
|
DEVICE_MODEL := Stora (MS2000/2110)
|
|
DEVICE_DTS := kirkwood-stora
|
|
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
|
|
kmod-rtc-pcf8563 kmod-hwmon-lm75 kmod-hwmon-tc654 \
|
|
kmod-gpio-button-hotplug
|
|
endef
|
|
TARGET_DEVICES += netgear_stora
|
|
|
|
define Device/raidsonic_ib-nas62x0
|
|
DEVICE_VENDOR := RaidSonic
|
|
DEVICE_MODEL := ICY BOX IB-NAS62x0
|
|
DEVICE_DTS := kirkwood-ib62x0
|
|
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-rtc-mv
|
|
SUPPORTED_DEVICES += ib62x0
|
|
endef
|
|
TARGET_DEVICES += raidsonic_ib-nas62x0
|
|
|
|
define Device/seagate_blackarmor-nas220
|
|
DEVICE_VENDOR := Seagate
|
|
DEVICE_MODEL := Blackarmor NAS220
|
|
DEVICE_PACKAGES := kmod-hwmon-adt7475 kmod-fs-ext4 kmod-ata-marvell-sata \
|
|
mdadm kmod-gpio-button-hotplug kmod-rtc-mv
|
|
PAGESIZE := 512
|
|
SUBPAGESIZE := 256
|
|
BLOCKSIZE := 16k
|
|
UBINIZE_OPTS := -e 1
|
|
endef
|
|
TARGET_DEVICES += seagate_blackarmor-nas220
|
|
|
|
define Device/seagate_dockstar
|
|
DEVICE_VENDOR := Seagate
|
|
DEVICE_MODEL := FreeAgent Dockstar
|
|
DEVICE_PACKAGES := kmod-rtc-mv
|
|
SUPPORTED_DEVICES += dockstar
|
|
endef
|
|
TARGET_DEVICES += seagate_dockstar
|
|
|
|
define Device/seagate_goflexnet
|
|
DEVICE_VENDOR := Seagate
|
|
DEVICE_MODEL := GoFlexNet
|
|
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-rtc-mv
|
|
SUPPORTED_DEVICES += goflexnet
|
|
endef
|
|
TARGET_DEVICES += seagate_goflexnet
|
|
|
|
define Device/seagate_goflexhome
|
|
DEVICE_VENDOR := Seagate
|
|
DEVICE_MODEL := GoFlexHome
|
|
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-rtc-mv
|
|
SUPPORTED_DEVICES += goflexhome
|
|
endef
|
|
TARGET_DEVICES += seagate_goflexhome
|
|
|
|
define Device/zyxel_nsa310b
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := NSA310b
|
|
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-r8169 kmod-fs-ext4 \
|
|
kmod-gpio-button-hotplug kmod-hwmon-lm85 kmod-rtc-mv
|
|
SUPPORTED_DEVICES += nsa310b
|
|
endef
|
|
TARGET_DEVICES += zyxel_nsa310b
|
|
|
|
define Device/zyxel_nsa310s
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := NSA310S
|
|
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-gpio-button-hotplug
|
|
endef
|
|
TARGET_DEVICES += zyxel_nsa310s
|
|
|
|
define Device/zyxel_nsa325
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := NSA325
|
|
DEVICE_VARIANT := v1/v2
|
|
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
|
|
kmod-gpio-button-hotplug kmod-rtc-pcf8563 kmod-usb3
|
|
SUPPORTED_DEVICES += nsa325
|
|
endef
|
|
TARGET_DEVICES += zyxel_nsa325
|
|
|
|
$(eval $(call BuildImage))
|