openwrt/target/linux/kirkwood/patches-6.6/003-6.5-ARM-dts-kirkwood-Add-Endian-4i-Edge-200-board.patch

From 5668d088ee4ea05db9daaae0645d1d1f579b20f9 Mon Sep 17 00:00:00 2001
From: Pawel Dembicki <paweldembicki@gmail.com>
Date: Mon, 3 Oct 2022 09:34:43 +0200
Subject: ARM: dts: kirkwood: Add Endian 4i Edge 200 board

Add Endian 4i Edge 200 is 5-port firewall.
It have also clone: Endian UTM Mini (The same hardware, with added WLAN
card).

Hardware:
  - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
  - Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
  - NAND Flash: 512MB (Micron 29F4G08AAC)
  - Lan 1-4: 4x GBE (Marvell 88E6171R-TFJ2)
  - Lan 5: 1x GBE (Marvell 88E1116R-NNC1)
  - Storage: MicroSD Slot
  - MCPIE: MiniPCIe Slot present [fitted with SparkLan WPEA-110N/E
          (Atheros AR9280 chipset) in Endian UTM Mini WLAN only]
  - USB: 1x USB 2.0 port
  - Console: RJ-45 port
  - LEDs: 3x GPIO controlled

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 arch/arm/boot/dts/Makefile                 |   1 +
 arch/arm/boot/dts/kirkwood-4i-edge-200.dts | 205 +++++++++++++++++++++++++++++
 2 files changed, 206 insertions(+)
 create mode 100644 arch/arm/boot/dts/kirkwood-4i-edge-200.dts

--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -300,6 +300,7 @@ dtb-$(CONFIG_ARCH_KEYSTONE) += \
 	keystone-k2g-evm.dtb \
 	keystone-k2g-ice.dtb
 dtb-$(CONFIG_MACH_KIRKWOOD) += \
+	kirkwood-4i-edge-200.dtb \
 	kirkwood-b3.dtb \
 	kirkwood-blackarmor-nas220.dtb \
 	kirkwood-c200-v1.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-4i-edge-200.dts
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Endian 4i Edge 200 Board Description
+ * Note: Endian UTM Mini is hardware clone of Endian Edge 200
+ * Copyright 2021-2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Endian 4i Edge 200";
+	compatible = "endian,4i-edge-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led>;
+		pinctrl-names = "default";
+
+		led-1 {
+			function = LED_FUNCTION_SD;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&eth0port {
+	speed = <1000>;
+	duplex = <1>;
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&eth1port {
+	phy-handle = <&ethphyb>;
+};
+
+&mdio {
+	status = "okay";
+
+	ethphyb: ethernet-phy@b {
+		reg = <0x0b>;
+
+		marvell,reg-init =
+			/* link-activity, bi-color mode 4 */
+			<3 0x10 0xfff0 0xf>; /* Reg 3,16 <- 0xzzzf */
+	};
+
+	switch0: switch@11 {
+		compatible = "marvell,mv88e6085";
+		reg = <0x11>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "port1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "port2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "port3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "port4";
+			};
+
+			port@5 {
+				reg = <5>;
+				phy-mode = "rgmii-id";
+				ethernet = <&eth0port>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x00000000 0x000a0000>;
+		read-only;
+	};
+
+	partition@a0000 {
+		label = "u-boot-env";
+		reg = <0x000a0000 0x00060000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "kernel";
+		reg = <0x00100000 0x00400000>;
+	};
+
+	partition@500000 {
+		label = "ubi";
+		reg = <0x00500000 0x1fb00000>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_sysrst>;
+	pinctrl-names = "default";
+
+	pmx_sysrst: pmx-sysrst {
+		marvell,pins = "mpp6";
+		marvell,function = "sysrst";
+	};
+
+	pmx_sdio_cd: pmx-sdio-cd {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	pmx_led: pmx-led {
+		marvell,pins = "mpp34", "mpp35", "mpp49";
+		marvell,function = "gpio";
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata_phy0 {
+	status = "disabled";
+};
+
+&sata_phy1 {
+	status = "disabled";
+};
+
+&sdio {
+	pinctrl-0 = <&pmx_sdio_cd>;
+	pinctrl-names = "default";
+	status = "okay";
+	cd-gpios = <&gpio0 28 9>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};