openwrt

Go to file

Geoff Levand 28fae0bccf ps3/petitboot: Run petitboot at first startup Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> SVN-Revision: 17324		2009-08-19 22:36:53 +00:00
docs	configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450 )	2009-07-05 11:17:49 +00:00
include	when regenerating an ipkg package, make sure the entire ipkg build dir is cleaned as well to prevent stale files from making it into the package after configuration changes	2009-08-19 15:12:54 +00:00
package	base-files: fix sysupgrade get_magic_word() function to return proper values if the first two bytes are identical	2009-08-19 19:12:34 +00:00
scripts	powerpc: Create a powerpc64 config feature	2009-08-18 23:07:45 +00:00
target	ps3/petitboot: Run petitboot at first startup	2009-08-19 22:36:53 +00:00
toolchain	pxcab: Replace TARGET_pxcab with feature powerpc64	2009-08-18 23:09:50 +00:00
tools	disable mpfr tests compilation, slightly speeds up the build process	2009-08-17 14:51:32 +00:00
.gitignore	add logs/ to .gitignore	2009-04-24 01:04:57 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	add menuconfig option for selecting initramfs compression	2009-08-16 05:35:34 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	2009-05-28 18:40:37 +00:00
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	2008-12-31 14:52:23 +00:00
feeds.conf.default	switch to LuCI 0.9.x branch	2009-06-10 23:55:19 +00:00
rules.mk	add a staging directory for unstripped package files, useful for debugging, will be used for mklibs integration later	2009-08-07 21:58:35 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org