openwrt/target/linux/ath79/dts/qca9558_dlink_dap-2695-a1.dts

116 lines
1.8 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca955x_dlink_dap-2xxx.dtsi"
/ {
compatible = "dlink,dap-2695-a1", "qca,qca9558";
model = "D-link DAP-2695-A1";
aliases {
led-boot = &led_power_red;
led-failsafe = &led_power_red;
led-running = &led_power_green;
led-upgrade = &led_power_red;
};
leds {
compatible = "gpio-leds";
led_power_green: power_green {
label = "green:power";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_power_red: power_red {
label = "red:power";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
wifi2g {
label = "green:wifi2g";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
};
&partitions {
partition@70000 {
label = "firmware";
reg = <0x070000 0xf00000>;
compatible = "wrg";
};
partition@f70000 {
label = "captival";
reg = <0xf70000 0x070000>;
read-only;
};
partition@fe0000 {
label = "certificate";
reg = <0xfe0000 0x010000>;
read-only;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x04 0x07600000 /* PORT0_PAD_CTRL */
0x0c 0x00080080 /* PORT6_PAD_CTRL */
0x7c 0x0000007e /* PORT0_STATUS */
0x94 0x0000007e /* PORT6_STATUS */
>;
};
};
&eth0 {
status = "okay";
phy-handle = <&phy0>;
pll-data = <0x56000000 0x00000101 0x00001616>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&eth1 {
status = "okay";
phy-mask = <0>;
pll-data = <0x03000101 0x00000101 0x00001616>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&pcie0 {
status = "okay";
};