openwrt/target/linux/ath79/dts/qca9558_devolo_dvl1750e.dts

105 lines
1.7 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca9558_devolo_dvl1xxx.dtsi"
/ {
compatible = "devolo,dvl1750e", "qca,qca9558";
model = "devolo WiFi pro 1750e";
aliases {
led-boot = &led_status_blue;
led-failsafe = &led_status_red;
led-running = &led_status_blue;
led-upgrade = &led_status_red;
};
keys {
wps {
label = "WPS Button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
usb_eject {
label = "USB Eject Button";
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
led_status_blue: status_blue {
label = "blue:status";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_status_red: status_red {
label = "red:status";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
};
beeper {
compatible = "gpio-beeper";
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
};
gpio_export {
compatible = "gpio-export";
gpio_usb_power {
gpio-export,name = "devolo:power:usb";
gpio-export,output = <1>;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
};
};
};
&usb_phy0 {
status = "okay";
};
&usb0 {
status = "okay";
};
&eth0 {
pll-data = <0xae000000 0x80000101 0x80001313>;
phy-mode = "rgmii-rxid";
};
&gmac_config {
rxdv-delay = <3>;
rxd-delay = <3>;
txen-delay = <0>;
txd-delay = <0>;
};
&mdio1 {
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
at803x-override-sgmii-link-check;
};
};
&eth1 {
status = "okay";
nvmem-cells = <&macaddr_art_0>;
nvmem-cell-names = "mac-address";
mac-address-increment = <1>;
phy-handle = <&phy1>;
pll-data = <0x03000101 0x00000101 0x00001313>;
qca955x-sgmii-fixup;
};