mirror
/
openwrt
mirror of https://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Releases Activity
46,135 Commits 8 Branches 69 Tags 229 MiB
C 59.6%
Makefile 18.9%
Roff 9%
Shell 6.8%
Perl 2.6%
Other 3%
Go to file
DENG Qingfang 1b7199c90c ramips: add support for JCG JHR-AC876M 
JCG JHR-AC876M is an AC2600M router

Hardware specs:
  SoC: MT7621AT
  2.4GHz: MT7615N 4x4 @ PCIe0
  5GHz: MT7615N 4x4 @ PCIe1
  Flash: Winbond W25Q128JVSQ 16MiB
  RAM: Nanya NT5CB128M16 256MiB
  USB 2.0 and 3.0 ports
  6 LEDs, 3 of which are connected to SoC GPIO
  Reset and WPS buttons

Flash instructions:
Stock to OpenWrt:
  Upload factory.bin in stock firmware's upgrade page,
  do not preserve settings

OpenWrt to stock:
  Push and hold the reset button for 5s while power cycling to
  enter recovery mode;
  Visit 192.168.1.1 and upload stock firmware

MAC addresses map:
  0x0004  *:1c  wlan2g/wan/label
  0x8004  *:20  wlan5g
  0xe000  *:1b  lan
  0xe006  *:1a  not used in stock fw

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
 		2019-12-13 19:43:47 +01:00
.github build: Update README & github help 2018-07-08 09:41:53 +01:00
config config: kernel: fix typo in HFSPLUG_FS_POSIX_ACL 2019-11-28 02:02:17 +02:00
include kernel: bump 4.19 to 4.19.88 2019-12-10 09:50:42 +01:00
package sunxi: add support for FriendlyARM Nano PI NEO Air dev board 2019-12-13 12:20:09 +01:00
scripts scripts/dl_github_archive.py: fix python3 str, bytes confusion 2019-11-04 11:11:19 +00:00
target ramips: add support for JCG JHR-AC876M 2019-12-13 19:43:47 +01:00
toolchain glibc: update to latest 2.27 commit (BZ #2503, BZ #2504) 2019-12-11 22:31:54 +01:00
tools tools: tplink-safeloader: fix whitespace issues 2019-11-27 22:54:36 +01:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore gitignore: ignore patches in OpenWrt root directory 2019-11-06 00:27:55 +01:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in merge: base: update base-files and basic config 2017-12-08 19:41:18 +01:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile build: add buildinfo as single Makefile target 2019-10-17 14:01:33 +02:00
README build: switch to Python 3 2019-07-26 08:09:16 +02:00
feeds.conf.default feeds: switch git.lede-project.org URLs to git.openwrt.org 2018-01-16 16:59:22 +01:00
rules.mk rules.mk: remove "$(STAGING_DIR)/include" 2019-11-02 20:51:56 +01:00

README 

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org