From fb76b808f8628215afebaf0f8af0bde635302590 Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Fri, 19 Aug 2022 00:18:14 +0200 Subject: [PATCH] arm64: dts: qcom: add PMP8074 DTSI PMP8074 is a companion PMIC to the Qualcomm IPQ8074 series that is controlled via SPMI. Add DTSI for it providing GPIO, regulator, RTC and VADC support. RTC is disabled by default as there is no built-in battery so it will loose time unless board vendor added a battery, so make it optional. Signed-off-by: Robert Marko Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220818221815.346233-4-robimarko@gmail.com --- arch/arm64/boot/dts/qcom/pmp8074.dtsi | 125 ++++++++++++++++++++++++++ 1 file changed, 125 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/pmp8074.dtsi --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmp8074.dtsi @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause + +#include +#include + +&spmi_bus { + pmic@0 { + compatible = "qcom,pmp8074", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmp8074_adc: adc@3100 { + compatible = "qcom,spmi-adc-rev2"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + ref-gnd@0 { + reg = ; + qcom,pre-scaling = <1 1>; + }; + + vref-1p25@1 { + reg = ; + qcom,pre-scaling = <1 1>; + }; + + vref-vadc@2 { + reg = ; + qcom,pre-scaling = <1 1>; + }; + + pmic_die: die-temp@6 { + reg = ; + qcom,pre-scaling = <1 1>; + }; + + xo_therm: xo-temp@76 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + pa_therm1: thermistor1@77 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + pa_therm2: thermistor2@78 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + pa_therm3: thermistor3@79 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + vph-pwr@131 { + reg = ; + qcom,pre-scaling = <1 3>; + }; + }; + + pmp8074_rtc: rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; + allow-set-time; + status = "disabled"; + }; + + pmp8074_gpios: gpio@c000 { + compatible = "qcom,pmp8074-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmp8074_gpios 0 0 12>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pmp8074", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + + regulators { + compatible = "qcom,pmp8074-regulators"; + + s3: s3 { + regulator-name = "vdd_s3"; + regulator-min-microvolt = <592000>; + regulator-max-microvolt = <1064000>; + regulator-always-on; + regulator-boot-on; + }; + + s4: s4 { + regulator-name = "vdd_s4"; + regulator-min-microvolt = <712000>; + regulator-max-microvolt = <992000>; + regulator-always-on; + regulator-boot-on; + }; + + l11: l11 { + regulator-name = "l11"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +};