From 8ddfa81d090c71fd6cb3cb8ca1d420c0da33a575 Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Thu, 15 Jun 2023 18:50:42 +0200 Subject: [PATCH] soc: qcom: Add RPM processor/subsystem driver Add a simple driver for the qcom,rpm-proc compatible that registers the "smd-edge" and populates other children defined in the device tree. Note that the DT schema belongs to the remoteproc subsystem while this driver is added inside soc/qcom. I argue that the RPM *is* a remoteproc, but as an implementation detail in Linux it can currently not benefit from anything provided by the remoteproc subsystem. The RPM firmware is usually already loaded and started by earlier components in the boot chain and is not meant to be ever restarted. To avoid breaking existing kernel configurations the driver is always built when smd-rpm.c is also built. They belong closely together anyway. To avoid build errors CONFIG_RPMSG_QCOM_SMD must be also built-in if rpm-proc is. Reviewed-by: Konrad Dybcio Signed-off-by: Stephan Gerhold Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-9-a07dcdefd918@gerhold.net Signed-off-by: Bjorn Andersson --- drivers/soc/qcom/Kconfig | 1 + drivers/soc/qcom/Makefile | 2 +- drivers/soc/qcom/rpm-proc.c | 77 +++++++++++++++++++++++++++++++++++++ 3 files changed, 79 insertions(+), 1 deletion(-) create mode 100644 drivers/soc/qcom/rpm-proc.c --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -153,6 +153,7 @@ config QCOM_SMD_RPM tristate "Qualcomm Resource Power Manager (RPM) over SMD" depends on ARCH_QCOM || COMPILE_TEST depends on RPMSG + depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n help If you say yes to this option, support will be included for the Resource Power Manager system found in the Qualcomm 8974 based --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -14,7 +14,7 @@ obj-$(CONFIG_QCOM_RMTFS_MEM) += rmtfs_me obj-$(CONFIG_QCOM_RPMH) += qcom_rpmh.o qcom_rpmh-y += rpmh-rsc.o qcom_rpmh-y += rpmh.o -obj-$(CONFIG_QCOM_SMD_RPM) += smd-rpm.o +obj-$(CONFIG_QCOM_SMD_RPM) += rpm-proc.o smd-rpm.o obj-$(CONFIG_QCOM_SMEM) += smem.o obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o obj-$(CONFIG_QCOM_SMP2P) += smp2p.o --- /dev/null +++ b/drivers/soc/qcom/rpm-proc.c @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (c) 2021-2023, Stephan Gerhold */ + +#include +#include +#include +#include +#include + +static int rpm_proc_probe(struct platform_device *pdev) +{ + struct qcom_smd_edge *edge = NULL; + struct device *dev = &pdev->dev; + struct device_node *edge_node; + int ret; + + edge_node = of_get_child_by_name(dev->of_node, "smd-edge"); + if (edge_node) { + edge = qcom_smd_register_edge(dev, edge_node); + of_node_put(edge_node); + if (IS_ERR(edge)) + return dev_err_probe(dev, PTR_ERR(edge), + "Failed to register smd-edge\n"); + } + + ret = devm_of_platform_populate(dev); + if (ret) { + dev_err(dev, "Failed to populate child devices: %d\n", ret); + goto err; + } + + platform_set_drvdata(pdev, edge); + return 0; +err: + if (edge) + qcom_smd_unregister_edge(edge); + return ret; +} + +static void rpm_proc_remove(struct platform_device *pdev) +{ + struct qcom_smd_edge *edge = platform_get_drvdata(pdev); + + if (edge) + qcom_smd_unregister_edge(edge); +} + +static const struct of_device_id rpm_proc_of_match[] = { + { .compatible = "qcom,rpm-proc", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, rpm_proc_of_match); + +static struct platform_driver rpm_proc_driver = { + .probe = rpm_proc_probe, + .remove_new = rpm_proc_remove, + .driver = { + .name = "qcom-rpm-proc", + .of_match_table = rpm_proc_of_match, + }, +}; + +static int __init rpm_proc_init(void) +{ + return platform_driver_register(&rpm_proc_driver); +} +arch_initcall(rpm_proc_init); + +static void __exit rpm_proc_exit(void) +{ + platform_driver_unregister(&rpm_proc_driver); +} +module_exit(rpm_proc_exit); + +MODULE_DESCRIPTION("Qualcomm RPM processor/subsystem driver"); +MODULE_AUTHOR("Stephan Gerhold "); +MODULE_LICENSE("GPL");