PART_NAME=firmware REQUIRE_IMAGE_METADATA=1 RAMFS_COPY_BIN='fw_printenv fw_setenv' RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock' platform_check_image() { case "$(board_name)" in asus,rt-ac58u) CI_UBIPART="UBI_DEV" local ubidev=$(nand_find_ubi $CI_UBIPART) local asus_root=$(nand_find_volume $ubidev jffs2) [ -n "$asus_root" ] || return 0 cat << EOF jffs2 partition is still present. There's probably no space left to install the filesystem. You need to delete the jffs2 partition first: # ubirmvol /dev/ubi0 --name=jffs2 Once this is done. Retry. EOF return 1 ;; esac return 0; } zyxel_do_upgrade() { local tar_file="$1" local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$') board_dir=${board_dir%/} tar Oxf $tar_file ${board_dir}/kernel | mtd write - kernel if [ "$SAVE_CONFIG" -eq 1 ]; then tar Oxf $tar_file ${board_dir}/root | mtd -j "$CONF_TAR" write - rootfs else tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs fi } platform_do_upgrade() { case "$(board_name)" in 8dev,jalapeno) nand_do_upgrade "$ARGV" ;; asus,rt-ac58u) CI_UBIPART="UBI_DEV" CI_KERNPART="linux" nand_do_upgrade "$1" ;; openmesh,a42 |\ openmesh,a62) PART_NAME="inactive" platform_do_upgrade_openmesh "$ARGV" ;; meraki,mr33) CI_KERNPART="part.safe" nand_do_upgrade "$1" ;; zyxel,nbg6617) zyxel_do_upgrade "$1" ;; *) default_do_upgrade "$ARGV" ;; esac } platform_nand_pre_upgrade() { case "$(board_name)" in asus,rt-ac58u) CI_UBIPART="UBI_DEV" CI_KERNPART="linux" ;; meraki,mr33) CI_KERNPART="part.safe" ;; esac }