# SPDX-License-Identifier: GPL-2.0-only # # Copyright (C) 2013 OpenWrt.org include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/image.mk define Image/Prepare rm -f $(KDIR)/fs_mark echo -ne '\xde\xad\xc0\xde' > $(KDIR)/fs_mark $(call prepare_generic_squashfs,$(KDIR)/fs_mark) # For UBI we want only one extra block rm -f $(KDIR)/ubi_mark echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark endef define Build/lzma-d16 $(STAGING_DIR_HOST)/bin/lzma e $@ -d16 $(1) $@.new mv $@.new $@ endef # Similar to Build/tplink-safeloader but uses TRX instead of clean kernel define Build/bcm53xx-tplink-safeloader $(STAGING_DIR_HOST)/bin/trx \ -o $@.trx \ -m 33554432 \ -f $(IMAGE_KERNEL) -a 1024 $(STAGING_DIR_HOST)/bin/tplink-safeloader \ -B $(TPLINK_BOARD) \ -k $@.trx \ -r $@ \ -j \ -o $@.new mv $@.new $@ rm $@.trx endef define Build/buffalo-wzr-header $(eval product=$(word 1,$(1))) $(eval region=$(word 2,$(1))) ( \ echo $(product)_$(BUFFALO_TAG_VERSION)_$(BUFFALO_TAG_MINOR)_$(region)_$(BUFFALO_TAG_PLATFORM); \ echo filelen=$$(stat -c%s $@); \ cat $@ \ ) > $@.new mv $@.new $@ endef # TRX with only one (kernel) partition define Build/trx $(STAGING_DIR_HOST)/bin/trx \ -o $@.new \ -m 33554432 \ -f $@ mv $@.new $@ endef define Build/trx-serial $(STAGING_DIR_HOST)/bin/otrx create $@.new \ -f $(IMAGE_KERNEL) -a 1024 \ -f $@ -a 0x10000 -A $(KDIR)/fs_mark mv $@.new $@ endef define Build/trx-nand # kernel: always use 4 MiB (-28 B or TRX header) to allow upgrades even # if it grows up between releases # root: UBI with one extra block containing UBI mark to trigger erasing # rest of partition $(STAGING_DIR_HOST)/bin/otrx create $@.new \ -f $(IMAGE_KERNEL) -a 0x20000 -b 0x400000 \ -f $@ \ -A $(KDIR)/ubi_mark -a 0x20000 mv $@.new $@ endef define Build/asus-trx $(STAGING_DIR_HOST)/bin/asustrx \ -p $(ASUS_PRODUCTID) -i $@ -o $@.new mv $@.new $@ endef define Build/luxul-lxl $(STAGING_DIR_HOST)/bin/lxlfw create $@.new \ -i $@ \ -b $(LUXUL_BOARD) mv $@.new $@ endef # Outputs a lzma compressed U-Boot that start at 0x00008000 # just like the D-Link boot loaders expect define Build/dlink-uboot-bin $(STAGING_DIR_HOST)/bin/lzma e $(STAGING_DIR_IMAGE)/$(DEVICE_NAME)-u-boot.bin -d16 $@ endef define Build/seama-nand # Seama entity $(STAGING_DIR_HOST)/bin/oseama \ entity $@.entity \ -m "dev=/dev/mtdblock/7" \ -m "type=firmware" \ -f $(IMAGE_KERNEL) \ -b 0x400000 \ -f $@ \ -f $(KDIR)/ubi_mark # Seama container $(STAGING_DIR_HOST)/bin/seama \ -s $@ \ -m "signature=$(SIGNATURE)" \ -i $@.entity endef define Build/dwl8610ap-image mkdir -p $@.tmptar # The DWL8610AP pretends to be a Broadcom reference design echo "bcm953012er" > $@.tmptar/board echo "LVL7" > $@.tmptar/model # Something high beyond what D-Link has put out echo "5.0.0.0" > $@.tmptar/version # Create rootfs.bin, this is just a NAND image including everything cp $@ $@.tmptar/rootfs.bin # Hash the rootfs.bin cat $@.tmptar/rootfs.bin | md5sum > $@.tmptar/rootfs.md5 cd $@.tmptar && tar -c -f $@.new * rm -rf $@.tmptar mv $@.new $@ endef DEVICE_VARS += ASUS_PRODUCTID DEVICE_VARS += BUFFALO_TAG_PLATFORM BUFFALO_TAG_VERSION BUFFALO_TAG_MINOR DEVICE_VARS += SIGNATURE DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_REGION TPLINK_BOARD DEVICE_VARS += LUXUL_BOARD IEEE8021X := wpad-basic-mbedtls B43 := $(IEEE8021X) kmod-b43 BRCMFMAC_43602A1 := $(IEEE8021X) kmod-brcmfmac brcmfmac-firmware-43602a1-pcie BRCMFMAC_4366B1 := $(IEEE8021X) kmod-brcmfmac brcmfmac-firmware-4366b1-pcie BRCMFMAC_4366C0 := $(IEEE8021X) kmod-brcmfmac brcmfmac-firmware-4366c0-pcie USB2_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-phy-bcm-ns-usb2 USB2_PACKAGES += kmod-usb-ledtrig-usbport USB3_PACKAGES := $(USB2_PACKAGES) kmod-usb3 kmod-phy-bcm-ns-usb3 define Device/Default PROFILES = Generic $$(DEVICE_NAME) # .dtb files are prefixed by SoC type, e.g. bcm4708- which is not included in device/image names # extract the full dtb name based on the device info DEVICE_DTS := $(patsubst %.dtb,%,$(notdir $(wildcard $(if $(IB),$(KDIR),$(DTS_DIR))/*-$(subst _,-,$(1)).dtb))) KERNEL := kernel-bin | append-dtb | lzma-d16 KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts) KERNEL_INITRAMFS_SUFFIX := .trx KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma-d16 | trx FILESYSTEMS := squashfs KERNEL_NAME := zImage DEVICE_IMG_NAME = $$(DEVICE_IMG_PREFIX)-$$(1).$$(2) IMAGES := trx BLOCKSIZE := 128k PAGESIZE := 2048 IMAGE/trx := append-ubi | trx-nand endef define Device/asus DEVICE_VENDOR := ASUS IMAGES := trx IMAGE/trx := append-ubi | trx-nand | asus-trx endef define Device/asus_rt-ac3100 $(call Device/asus) DEVICE_MODEL := RT-AC3100 DEVICE_PACKAGES := $(BRCMFMAC_4366B1) $(BRCMFMAC_4366C0) $(USB3_PACKAGES) ASUS_PRODUCTID := RT-AC3100 endef TARGET_DEVICES += asus_rt-ac3100 define Device/asus_rt-ac56u $(call Device/asus) DEVICE_MODEL := RT-AC56U DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES) ASUS_PRODUCTID := RT-AC56U endef TARGET_DEVICES += asus_rt-ac56u define Device/asus_rt-ac68u $(call Device/asus) DEVICE_MODEL := RT-AC68U DEVICE_PACKAGES := $(USB3_PACKAGES) ASUS_PRODUCTID := RT-AC68U endef TARGET_DEVICES += asus_rt-ac68u define Device/asus_rt-ac87u $(call Device/asus) DEVICE_MODEL := RT-AC87U DEVICE_PACKAGES := $(USB3_PACKAGES) ASUS_PRODUCTID := RT-AC87U endef TARGET_DEVICES += asus_rt-ac87u define Device/asus_rt-ac88u $(call Device/asus) DEVICE_MODEL := RT-AC88U DEVICE_PACKAGES := $(BRCMFMAC_4366B1) $(BRCMFMAC_4366C0) $(USB3_PACKAGES) ASUS_PRODUCTID := RT-AC88U endef TARGET_DEVICES += asus_rt-ac88u define Device/asus_rt-n18u $(call Device/asus) DEVICE_MODEL := RT-N18U DEVICE_PACKAGES := $(USB3_PACKAGES) ASUS_PRODUCTID := RT-N18U endef TARGET_DEVICES += asus_rt-n18u # Buffalo devices have TFTP recovery mode which can work nicely with initramfs # kernels. # We should have two initramfs images for Buffalo: plain initramfs kernel and # TRX with initramfs kernel. It's not possible right now so let's just build # plain initramfs kernel as it may be more useful. define Device/buffalo/Default DEVICE_VENDOR := Buffalo KERNEL_INITRAMFS_SUFFIX = $$(KERNEL_SUFFIX) KERNEL_INITRAMFS = $$(KERNEL) endef define Device/buffalo_wxr-1900dhp $(call Device/buffalo/Default) DEVICE_MODEL := WXR-1900DHP DEVICE_PACKAGES := $(USB3_PACKAGES) endef TARGET_DEVICES += buffalo_wxr-1900dhp define Device/buffalo_wzr-600dhp2 $(call Device/buffalo/Default) DEVICE_MODEL := WZR-600DHP2 DEVICE_PACKAGES := $(B43) $(USB2_PACKAGES) endef TARGET_DEVICES += buffalo_wzr-600dhp2 define Device/buffalo_wzr-900dhp $(call Device/buffalo/Default) DEVICE_MODEL := WZR-900DHP DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES) BUFFALO_TAG_PLATFORM := bcm BUFFALO_TAG_VERSION := 9.99 BUFFALO_TAG_MINOR := 9.99 IMAGES += factory-DHP-EU.bin factory-DHP2-JP.bin IMAGE/factory-DHP-EU.bin := \ append-ubi | trx-nand | buffalo-wzr-header WZR-900DHP EU | \ buffalo-enc WZR-900DHP $$(BUFFALO_TAG_VERSION) | \ buffalo-tag-dhp WZR-900DHP EU mlang20 | buffalo-enc-tag | \ buffalo-dhp-image IMAGE/factory-DHP2-JP.bin := \ append-ubi | trx-nand | buffalo-wzr-header WZR-900DHP2 JP | \ buffalo-enc WZR-900DHP2 $$(BUFFALO_TAG_VERSION) | \ buffalo-tag-dhp WZR-900DHP2 JP jp | buffalo-enc-tag | \ buffalo-dhp-image endef TARGET_DEVICES += buffalo_wzr-900dhp define Device/buffalo_wzr-1750dhp $(call Device/buffalo/Default) DEVICE_MODEL := WZR-1750DHP DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES) endef TARGET_DEVICES += buffalo_wzr-1750dhp define Device/dlink DEVICE_VENDOR := D-Link IMAGES := bin IMAGE/bin := append-ubi | seama-nand endef define Device/dlink_dir-885l DEVICE_MODEL := DIR-885L DEVICE_PACKAGES := $(BRCMFMAC_4366B1) $(USB3_PACKAGES) $(Device/dlink) SIGNATURE := wrgac42_dlink.2015_dir885l endef TARGET_DEVICES += dlink_dir-885l define Device/dlink_dir-890l DEVICE_VENDOR := D-Link DEVICE_MODEL := DIR-890L DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB2_PACKAGES) $(USB3_PACKAGES) # Layout: U-boot (128kb max) followed by kernel and appended DTB. # This is done because the boot loader will only read the first 2 MB # from the flash and decompress the LZMA it finds there after the # SEAMA header. Since the compressed kernel will not fit in 2 MB, # we put U-Boot there and let U-Boot read and execute the kernel. KERNEL := dlink-uboot-bin | pad-to 128k | append-kernel | append-dtb $(Device/dlink) SIGNATURE := wrgac36_dlink.2013gui_dir890 endef TARGET_DEVICES += dlink_dir-890l define Device/dlink_dwl-8610ap DEVICE_VENDOR := D-Link DEVICE_MODEL := DWL-8610AP DEVICE_PACKAGES := $(B43) IMAGES := factory.tar IMAGE/factory.tar := append-ubi | trx-nand | dwl8610ap-image endef TARGET_DEVICES += dlink_dwl-8610ap define Device/linksys_ea6300-v1 DEVICE_VENDOR := Linksys DEVICE_MODEL := EA6300 DEVICE_VARIANT := v1 DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES) endef TARGET_DEVICES += linksys_ea6300-v1 define Device/linksys_ea6500-v2 DEVICE_VENDOR := Linksys DEVICE_MODEL := EA6500 DEVICE_VARIANT := v2 DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES) endef TARGET_DEVICES += linksys_ea6500-v2 define Device/linksys_ea9200 DEVICE_VENDOR := Linksys DEVICE_MODEL := EA9200 DEVICE_VARIANT := v1 DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES) endef TARGET_DEVICES += linksys_ea9200 define Device/linksys_ea9500 DEVICE_VENDOR := Linksys DEVICE_MODEL := EA9500 DEVICE_PACKAGES := $(BRCMFMAC_4366C0) $(USB3_PACKAGES) DEVICE_DTS := bcm47094-linksys-panamera endef TARGET_DEVICES += linksys_ea9500 define Device/luxul DEVICE_VENDOR := Luxul IMAGES := lxl IMAGE/lxl := append-ubi | trx-nand | luxul-lxl endef define Device/luxul_abr-4500 $(Device/luxul) DEVICE_MODEL := ABR-4500 DEVICE_PACKAGES := $(USB3_PACKAGES) LUXUL_BOARD := ABR-4500 endef TARGET_DEVICES += luxul_abr-4500 define Device/luxul_xap-1610 $(Device/luxul) DEVICE_MODEL := XAP-1610 DEVICE_PACKAGES := $(BRCMFMAC_4366C0) IMAGE/lxl := append-rootfs | trx-serial | luxul-lxl LUXUL_BOARD := XAP-1610 endef TARGET_DEVICES += luxul_xap-1610 define Device/luxul_xbr-4500 $(Device/luxul) DEVICE_MODEL := XBR-4500 DEVICE_PACKAGES := $(USB3_PACKAGES) LUXUL_BOARD := XBR-4500 endef TARGET_DEVICES += luxul_xbr-4500 define Device/luxul_xwr-3150 $(Device/luxul) DEVICE_MODEL := XWR-3150 DEVICE_PACKAGES := $(BRCMFMAC_4366C0) $(USB3_PACKAGES) DEVICE_DTS := bcm47094-luxul-xwr-3150-v1 LUXUL_BOARD := XWR-3150 endef TARGET_DEVICES += luxul_xwr-3150 define Device/meraki_mr26 DEVICE_VENDOR := Meraki DEVICE_MODEL := MR26 DEVICE_PACKAGES := $(B43) kmod-i2c-bcm-iproc kmod-eeprom-at24 \ kmod-hwmon-ina2xx kmod-leds-uleds nu801 DEVICE_DTS := bcm53015-meraki-mr26 # resize the initramfs to fit the size of the existing part.safe. KERNEL_LOADADDR := 0x00008000 KERNEL_INITRAMFS_SUFFIX := .bin KERNEL_INITRAMFS := kernel-bin | append-dtb | gzip | uImage gzip | pad-to 9310208 # LZMA is not supported by the uboot KERNEL := kernel-bin | append-dtb | gzip | uImage gzip IMAGES += sysupgrade.bin IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata endef TARGET_DEVICES += meraki_mr26 define Device/meraki_mr32 DEVICE_VENDOR := Meraki DEVICE_MODEL := MR32 DEVICE_PACKAGES := $(B43) kmod-i2c-bcm-iproc kmod-eeprom-at24 \ kmod-leds-pwm kmod-hwmon-ina2xx kmod-bluetooth DEVICE_DTS := bcm53016-meraki-mr32 # Meraki FW r23 tries to resize the part.safe partition before it will # flash the image. This is a bit of a problem, since resizing will fail # if the partition is smaller than the old one. KERNEL_LOADADDR := 0x00008000 KERNEL_INITRAMFS_SUFFIX := .bin DEVICE_DTS_DELIMITER := @ DEVICE_DTS_CONFIG := config@1 KERNEL_INITRAMFS := kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb | \ pad-to 10362880 KERNEL := kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb IMAGES += sysupgrade.bin IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata # The loader is specifically looking for fdt@2: # [ 3.190000] find_itb_subimage: error finding fdt@2: FDT_ERR_NOTFOUND # The image won't boot, if it isn't found. :( DEVICE_FDT_NUM := 2 endef TARGET_DEVICES += meraki_mr32 define Device/netgear DEVICE_VENDOR := NETGEAR IMAGES := chk IMAGE/chk := append-ubi | trx-nand | netgear-chk NETGEAR_REGION := 1 endef define Device/netgear_r6250 DEVICE_MODEL := R6250 DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES) $(Device/netgear) NETGEAR_BOARD_ID := U12H245T00_NETGEAR endef TARGET_DEVICES += netgear_r6250 define Device/netgear_r6300-v2 DEVICE_MODEL := R6300 DEVICE_VARIANT := v2 DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES) $(Device/netgear) NETGEAR_BOARD_ID := U12H240T00_NETGEAR endef TARGET_DEVICES += netgear_r6300-v2 define Device/netgear_r7000 DEVICE_MODEL := R7000 DEVICE_PACKAGES := $(USB3_PACKAGES) $(Device/netgear) NETGEAR_BOARD_ID := U12H270T00_NETGEAR endef TARGET_DEVICES += netgear_r7000 define Device/netgear_r7900 DEVICE_MODEL := R7900 DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES) $(Device/netgear) NETGEAR_BOARD_ID := U12H315T30_NETGEAR endef TARGET_DEVICES += netgear_r7900 define Device/netgear_r8000 DEVICE_MODEL := R8000 DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES) $(Device/netgear) NETGEAR_BOARD_ID := U12H315T00_NETGEAR endef TARGET_DEVICES += netgear_r8000 define Device/netgear_r8500 DEVICE_MODEL := R8500 DEVICE_PACKAGES := $(BRCMFMAC_4366B1) $(USB3_PACKAGES) $(Device/netgear) NETGEAR_BOARD_ID := U12H334T00_NETGEAR DEFAULT := n endef TARGET_DEVICES += netgear_r8500 define Device/smartrg_sr400ac DEVICE_VENDOR := SmartRG DEVICE_MODEL := SR400ac DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES) IMAGES := trx IMAGE/trx := append-rootfs | trx-serial KERNEL_INITRAMFS_SUFFIX := .bin KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma-d16 endef TARGET_DEVICES += smartrg_sr400ac define Device/phicomm_k3 DEVICE_VENDOR := PHICOMM DEVICE_MODEL := K3 DEVICE_ALT0_VENDOR := Wavlink DEVICE_ALT0_MODEL := QUANTUM DAX DEVICE_ALT1_VENDOR := Wavlink DEVICE_ALT1_MODEL := WL-WN538A8 DEVICE_PACKAGES := $(BRCMFMAC_4366C0) $(USB3_PACKAGES) IMAGES := trx endef TARGET_DEVICES += phicomm_k3 define Device/tenda_ac9 DEVICE_VENDOR := Tenda DEVICE_MODEL := AC9 DEVICE_PACKAGES := $(B43) $(USB2_PACKAGES) IMAGES := trx IMAGE/trx := append-rootfs | trx-serial endef TARGET_DEVICES += tenda_ac9 define Device/tplink_archer-c5-v2 DEVICE_VENDOR := TP-Link DEVICE_MODEL := Archer C5 DEVICE_VARIANT := v2 DEVICE_PACKAGES := $(B43) $(USB2_PACKAGES) IMAGES := bin IMAGE/bin := append-rootfs | bcm53xx-tplink-safeloader TPLINK_BOARD := ARCHER-C5-V2 BROKEN := y endef #TARGET_DEVICES += tplink_archer-c5-v2 define Device/tplink_archer-c9-v1 DEVICE_VENDOR := TP-Link DEVICE_MODEL := Archer C9 DEVICE_VARIANT := v1 DEVICE_PACKAGES := $(USB3_PACKAGES) IMAGES := bin IMAGE/bin := append-rootfs | bcm53xx-tplink-safeloader TPLINK_BOARD := ARCHERC9 BROKEN := y endef #TARGET_DEVICES += tplink_archer-c9-v1 $(eval $(call BuildImage))