#include "mt7628an.dtsi" #include #include / { compatible = "tplink,tl-mr3020-v3", "mediatek,mt7628an-soc"; model = "TP-Link TL-MR3020 v3"; aliases { led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; label-mac-device = ðernet; }; chosen { bootargs = "console=ttyS0,115200"; }; keys { compatible = "gpio-keys"; wps { label = "wps"; gpios = <&gpio 38 GPIO_ACTIVE_LOW>; linux,code = ; }; modec1 { label = "sw1"; gpios = <&gpio 41 GPIO_ACTIVE_LOW>; linux,code = ; linux,input-type = ; }; modec2 { label = "sw2"; gpios = <&gpio 42 GPIO_ACTIVE_LOW>; linux,code = ; linux,input-type = ; }; }; leds { compatible = "gpio-leds"; led_power: power { label = "green:power"; gpios = <&gpio 37 GPIO_ACTIVE_LOW>; default-state = "on"; }; wan { label = "green:3g"; gpios = <&gpio 43 GPIO_ACTIVE_LOW>; trigger-sources = <&ehci_port1>, <&ohci_port1>; linux,default-trigger = "usbport"; }; wlan { label = "green:wlan"; gpios = <&gpio 44 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; wps { label = "green:wps"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; }; lan { label = "green:lan"; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; }; }; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; m25p,fast-read; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "boot"; reg = <0x0 0x20000>; read-only; }; partition@20000 { compatible = "tplink,firmware"; label = "firmware"; reg = <0x20000 0x7a0000>; }; partition@7c0000 { label = "config"; reg = <0x7c0000 0x10000>; read-only; }; factory: partition@7d0000 { label = "factory"; reg = <0x7d0000 0x30000>; read-only; }; }; }; }; &state_default { gpio { groups = "i2s", "refclk", "wdt", "p2led_an", "p1led_an", "p0led_an", "wled_an"; function = "gpio"; }; }; &wmac { status = "okay"; mediatek,mtd-eeprom = <&factory 0x20000>; nvmem-cells = <&macaddr_factory_f100>; nvmem-cell-names = "mac-address"; }; ðernet { nvmem-cells = <&macaddr_factory_f100>; nvmem-cell-names = "mac-address"; }; &factory { compatible = "nvmem-cells"; #address-cells = <1>; #size-cells = <1>; macaddr_factory_f100: macaddr@f100 { reg = <0xf100 0x6>; }; };