// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7621.dtsi" #include #include / { compatible = "jcg,q20", "mediatek,mt7621-soc"; model = "JCG Q20"; aliases { led-boot = &led_status_red; led-failsafe = &led_status_red; led-running = &led_status_blue; led-upgrade = &led_status_blue; label-mac-device = &gmac0; }; chosen { bootargs = "console=ttyS0,115200"; }; leds { compatible = "gpio-leds"; led_status_red: status_red { label = "red:status"; gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; }; led_status_blue: status_blue { label = "blue:status"; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; linux,code = ; }; }; ubi-concat { compatible = "mtd-concat"; devices = <&ubiconcat0 &ubiconcat1>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "ubi"; reg = <0x0 0x5900000>; }; }; }; }; &nand { status = "okay"; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "Bootloader"; reg = <0x0 0x80000>; read-only; }; partition@80000 { label = "Config"; reg = <0x80000 0x80000>; }; factory: partition@100000 { label = "Factory"; reg = <0x100000 0x80000>; read-only; }; partition@180000 { label = "kernel"; reg = <0x180000 0x400000>; }; ubiconcat0: partition@580000 { label = "ubiconcat0"; reg = <0x580000 0x1c00000>; }; partition@2180000 { label = "firmware_backup"; reg = <0x2180000 0x2000000>; }; partition@4180000 { label = "rootfs_data_back"; reg = <0x4180000 0x80000>; read-only; }; partition@4200000 { label = "nvram_config"; reg = <0x4200000 0x80000>; read-only; }; ubiconcat1: partition@4280000 { label = "ubiconcat1"; reg = <0x4280000 0x3d00000>; }; /* * last 512 KiB are for the bad block table */ }; }; &pcie { status = "okay"; }; &pcie1 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x0>; }; }; &gmac0 { nvmem-cells = <&macaddr_factory_3fff4>; nvmem-cell-names = "mac-address"; }; &switch0 { ports { port@0 { status = "okay"; label = "wan"; nvmem-cells = <&macaddr_factory_3fffa>; nvmem-cell-names = "mac-address"; }; port@1 { status = "okay"; label = "lan1"; }; port@4 { status = "okay"; label = "lan2"; }; }; }; &state_default { gpio { groups = "jtag", "wdt"; function = "gpio"; }; }; &factory { compatible = "nvmem-cells"; #address-cells = <1>; #size-cells = <1>; macaddr_factory_3fff4: macaddr@3fff4 { reg = <0x3fff4 0x6>; }; macaddr_factory_3fffa: macaddr@3fffa { reg = <0x3fffa 0x6>; }; };