From 38b62a12231be4b86fc5ca5477579d29831c02a5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 18 Oct 2019 10:31:07 +0100 Subject: [PATCH 629/660] net: sfp: ensure TX_FAULT has deasserted before probing the PHY TX_FAULT should be deasserted to indicate that the module has completed its initialisation. This may include the on-board PHY, so wait until the module has deasserted TX_FAULT before probing the PHY. This means that we need an extra state to handle a TX_FAULT that remains set for longer than t_init, since using the existing handling state would bypass the PHY probe. Signed-off-by: Russell King --- drivers/net/phy/sfp.c | 31 +++++++++++++++++++++++++------ 1 file changed, 25 insertions(+), 6 deletions(-) --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -56,6 +56,7 @@ enum { SFP_S_DOWN = 0, SFP_S_WAIT, SFP_S_INIT, + SFP_S_INIT_TX_FAULT, SFP_S_WAIT_LOS, SFP_S_LINK_UP, SFP_S_TX_FAULT, @@ -113,6 +114,7 @@ static const char * const sm_state_strin [SFP_S_DOWN] = "down", [SFP_S_WAIT] = "wait", [SFP_S_INIT] = "init", + [SFP_S_INIT_TX_FAULT] = "init_tx_fault", [SFP_S_WAIT_LOS] = "wait_los", [SFP_S_LINK_UP] = "link_up", [SFP_S_TX_FAULT] = "tx_fault", @@ -1660,8 +1662,6 @@ static void sfp_sm_main(struct sfp *sfp, if (event != SFP_E_TIMEOUT) break; - sfp_sm_probe_for_phy(sfp); - if (sfp->state & SFP_F_TX_FAULT) { /* Wait t_init before indicating that the link is up, * provided the current state indicates no TX_FAULT. If @@ -1683,10 +1683,29 @@ static void sfp_sm_main(struct sfp *sfp, break; case SFP_S_INIT: - if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) - sfp_sm_fault(sfp, SFP_S_TX_FAULT, true); - else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) - init_done: sfp_sm_link_check_los(sfp); + if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) { + /* TX_FAULT is still asserted after t_init, so assume + * there is a fault. + */ + sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT, + sfp->sm_retries == 5); + } else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) { + init_done: /* TX_FAULT deasserted or we timed out with TX_FAULT + * clear. Probe for the PHY and check the LOS state. + */ + sfp_sm_probe_for_phy(sfp); + sfp_sm_link_check_los(sfp); + + /* Reset the fault retry count */ + sfp->sm_retries = 5; + } + break; + + case SFP_S_INIT_TX_FAULT: + if (event == SFP_E_TIMEOUT) { + sfp_module_tx_fault_reset(sfp); + sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES); + } break; case SFP_S_WAIT_LOS: