mirror
/
openwrt
mirror of https://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Releases Activity

kernel: bump 6.1 to 6.1.39 

Removed upstreamed:
	generic/backport-6.1/803-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch[1]
	generic/pending-6.1/143-jffs2-reduce-stack-usage-in-jffs2_build_xattr_subsys.patch[2]
	bcm27xx/patches-6.1/950-0034-drm-bridge-Introduce-pre_enable_upstream_first-to-al.patch[3]
	bcm27xx/patches-6.1/950-0439-nvmem-Use-NVMEM_DEVID_AUTO.patch[4]
	bcm4908/patches-6.1/040-mtd-parsers-refer-to-ARCH_BCMBCA-instead-of-ARCH_BCM.patch[5]
	bcm53xx/patches-6.1/031-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch[6]
	bcm53xx/patches-6.1/031-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch[7]
	mediatek/patches-6.1/351-cpufreq-mediatek-correct-voltages-for-MT7622-and-MT7.patch[8]
	qualcommax/patches-6.1/0008-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch[9]

Manually rebased:
	bcm27xx/patches-6.1/950-0035-drm-panel-Add-prepare_upstream_first-flag-to-drm_pan.patch
	bcm27xx/patches-6.1/950-0404-drm-panel-panel-ilitek9881c-Add-prepare_upstream_fir.patch
	bcm27xx/patches-6.1/950-0699-Bluetooth-hci_sync-Add-fallback-bd-address-prop.patch
	mediatek/patches-6.1/350-21-cpufreq-mediatek-Add-support-for-MT7988.patch

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=ab0bd172d6289310a05a0cd15e1432e828d386ae
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=6df680709d901346831ef8f221cc90a42062c526
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=5044e5f2511c9afdf9880d2bb6b9d37dfc345dac
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=e27948f329f7e02591ed1feb9a7710c2ccf89a83
5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=ad2928e7f3f6120a0bd18aa1056b3b24068027c5
6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=2b55a985727833f37c39911f34096b3fdf2a367d
7. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=90d4c487cd658b51212eb65ae804ab11af193672
8. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=7e3ee25e8c7c7be1eacdfc6d9f5f0e550a2af241
9. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=b20854ef6c4955be3310975a72f02d92cb01d6d4

Build system: x86/64
Build-tested: x86/64
Run-tested: x86/64

Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de>
Co-authored-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: John Audia <therealgraysky@proton.me>
[ rebase bcm27xx and mediatek patches, refresh commit description ]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
[ minor fixup to bcm27xx patches, refresh commit description ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This commit is contained in:
John Audia 2023-07-20 05:51:10 -04:00 committed by Hauke Mehrtens
parent a110de8152
commit fec22f8375
30 changed files with 65 additions and 779 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
include/kernel-6.1
View File

@ -1,2 +1,2 @@
LINUX_VERSION-6.1 = .38
LINUX_KERNEL_HASH-6.1.38 = f9a4f91b609f7d332a5f2be01ab86336fa00149fae6bdc19f16fa19f78802d43
LINUX_VERSION-6.1 = .39
LINUX_KERNEL_HASH-6.1.39 = 4cddee22fdf657138a06af653492f67cd3a4762c04a34725534bd200d99085b8

308
target/linux/bcm27xx/patches-6.1/950-0034-drm-bridge-Introduce-pre_enable_upstream_first-to-al.patch
View File

@ -1,308 +0,0 @@
From 5365030a003a6cb0c336202256341e4bc9d65d52 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Thu, 16 Dec 2021 15:25:35 +0000
Subject: [PATCH] drm/bridge: Introduce pre_enable_upstream_first to
alter bridge init order
DSI sink devices typically want the DSI host powered up and configured
before they are powered up. pre_enable is the place this would normally
happen, but they are called in reverse order from panel/connector towards
the encoder, which is the "wrong" order.
Add a new flag pre_enable_upstream_first that any bridge can set
to swap the order of pre_enable (and post_disable) for that and the
immediately upstream bridge.
Should the immediately upstream bridge also set the
pre_enable_upstream_first flag, the bridge upstream of that will be called
before either of those which requested pre_enable_upstream_first.
eg:
- Panel
- Bridge 1
- Bridge 2 pre_enable_upstream_first
- Bridge 3
- Bridge 4 pre_enable_upstream_first
- Bridge 5 pre_enable_upstream_first
- Bridge 6
- Encoder
Would result in pre_enable's being called as Panel, Bridge 1, Bridge 3,
Bridge 2, Bridge 6, Bridge 5, Bridge 4, Encoder.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
drivers/gpu/drm/drm_bridge.c | 177 +++++++++++++++++++++++++----------
include/drm/drm_bridge.h | 8 ++
2 files changed, 137 insertions(+), 48 deletions(-)
--- a/drivers/gpu/drm/drm_bridge.c
+++ b/drivers/gpu/drm/drm_bridge.c
@@ -547,20 +547,15 @@ EXPORT_SYMBOL(drm_bridge_chain_disable);
* encoder chain, starting from the first bridge to the last. These are called
* after completing the encoder's prepare op.
*
+ * If a bridge sets @pre_enable_upstream_first, then the @post_disable for that
+ * bridge will be called before the previous one to reverse the @pre_enable
+ * calling direction.
+ *
* Note: the bridge passed should be the one closest to the encoder
*/
void drm_bridge_chain_post_disable(struct drm_bridge *bridge)
{
- struct drm_encoder *encoder;
-
- if (!bridge)
- return;
-
- encoder = bridge->encoder;
- list_for_each_entry_from(bridge, &encoder->bridge_chain, chain_node) {
- if (bridge->funcs->post_disable)
- bridge->funcs->post_disable(bridge);
- }
+ drm_atomic_bridge_chain_post_disable(bridge, NULL);
}
EXPORT_SYMBOL(drm_bridge_chain_post_disable);
@@ -602,24 +597,14 @@ EXPORT_SYMBOL(drm_bridge_chain_mode_set)
* chain, starting from the last bridge to the first. These are called
* before calling the encoder's commit op.
*
+ * If a bridge sets @pre_enable_upstream_first, then the @pre_enable for the
+ * previous bridge will be called before @pre_enable of this bridge.
+ *
* Note: the bridge passed should be the one closest to the encoder
*/
void drm_bridge_chain_pre_enable(struct drm_bridge *bridge)
{
- struct drm_encoder *encoder;
- struct drm_bridge *iter;
-
- if (!bridge)
- return;
-
- encoder = bridge->encoder;
- list_for_each_entry_reverse(iter, &encoder->bridge_chain, chain_node) {
- if (iter->funcs->pre_enable)
- iter->funcs->pre_enable(iter);
-
- if (iter == bridge)
- break;
- }
+ drm_atomic_bridge_chain_pre_enable(bridge, NULL);
}
EXPORT_SYMBOL(drm_bridge_chain_pre_enable);
@@ -691,6 +676,25 @@ void drm_atomic_bridge_chain_disable(str
}
EXPORT_SYMBOL(drm_atomic_bridge_chain_disable);
+static void drm_atomic_bridge_call_post_disable(struct drm_bridge *bridge,
+ struct drm_atomic_state *old_state)
+{
+ if (old_state && bridge->funcs->atomic_post_disable) {
+ struct drm_bridge_state *old_bridge_state;
+
+ old_bridge_state =
+ drm_atomic_get_old_bridge_state(old_state,
+ bridge);
+ if (WARN_ON(!old_bridge_state))
+ return;
+
+ bridge->funcs->atomic_post_disable(bridge,
+ old_bridge_state);
+ } else if (bridge->funcs->post_disable) {
+ bridge->funcs->post_disable(bridge);
+ }
+}
+
/**
* drm_atomic_bridge_chain_post_disable - cleans up after disabling all bridges
* in the encoder chain
@@ -701,6 +705,9 @@ EXPORT_SYMBOL(drm_atomic_bridge_chain_di
* &drm_bridge_funcs.post_disable) op for all the bridges in the encoder chain,
* starting from the first bridge to the last. These are called after completing
* &drm_encoder_helper_funcs.atomic_disable
+ * If a bridge sets @pre_enable_upstream_first, then the @post_disable for that
+ * bridge will be called before the previous one to reverse the @pre_enable
+ * calling direction.
*
* Note: the bridge passed should be the one closest to the encoder
*/
@@ -708,30 +715,75 @@ void drm_atomic_bridge_chain_post_disabl
struct drm_atomic_state *old_state)
{
struct drm_encoder *encoder;
+ struct drm_bridge *next, *limit;
if (!bridge)
return;
encoder = bridge->encoder;
+
list_for_each_entry_from(bridge, &encoder->bridge_chain, chain_node) {
- if (bridge->funcs->atomic_post_disable) {
- struct drm_bridge_state *old_bridge_state;
+ limit = NULL;
- old_bridge_state =
- drm_atomic_get_old_bridge_state(old_state,
- bridge);
- if (WARN_ON(!old_bridge_state))
- return;
+ if (!list_is_last(&bridge->chain_node, &encoder->bridge_chain)) {
+ next = list_next_entry(bridge, chain_node);
- bridge->funcs->atomic_post_disable(bridge,
- old_bridge_state);
- } else if (bridge->funcs->post_disable) {
- bridge->funcs->post_disable(bridge);
+ if (next->pre_enable_upstream_first) {
+ /* Downstream bridge had requested that upstream
+ * was enabled first, so disabled last
+ */
+ limit = next;
+
+ /* Find the next bridge that has NOT requested
+ * upstream to be enabled first / disabled last
+ */
+ list_for_each_entry_from(next, &encoder->bridge_chain,
+ chain_node) {
+ if (next->pre_enable_upstream_first) {
+ next = list_prev_entry(next, chain_node);
+ limit = next;
+ break;
+ }
+ }
+
+ /* Call these bridges in reverse order */
+ list_for_each_entry_from_reverse(next, &encoder->bridge_chain,
+ chain_node) {
+ if (next == bridge)
+ break;
+
+ drm_atomic_bridge_call_post_disable(next,
+ old_state);
+ }
+ }
}
+
+ drm_atomic_bridge_call_post_disable(bridge, old_state);
+
+ if (limit)
+ bridge = limit;
}
}
EXPORT_SYMBOL(drm_atomic_bridge_chain_post_disable);
+static void drm_atomic_bridge_call_pre_enable(struct drm_bridge *bridge,
+ struct drm_atomic_state *old_state)
+{
+ if (old_state && bridge->funcs->atomic_pre_enable) {
+ struct drm_bridge_state *old_bridge_state;
+
+ old_bridge_state =
+ drm_atomic_get_old_bridge_state(old_state,
+ bridge);
+ if (WARN_ON(!old_bridge_state))
+ return;
+
+ bridge->funcs->atomic_pre_enable(bridge, old_bridge_state);
+ } else if (bridge->funcs->pre_enable) {
+ bridge->funcs->pre_enable(bridge);
+ }
+}
+
/**
* drm_atomic_bridge_chain_pre_enable - prepares for enabling all bridges in
* the encoder chain
@@ -743,33 +795,62 @@ EXPORT_SYMBOL(drm_atomic_bridge_chain_po
* starting from the last bridge to the first. These are called before calling
* &drm_encoder_helper_funcs.atomic_enable
*
+ * If a bridge sets @pre_enable_upstream_first, then the pre_enable for the
+ * upstream bridge will be called before pre_enable of this bridge.
+ *
* Note: the bridge passed should be the one closest to the encoder
*/
void drm_atomic_bridge_chain_pre_enable(struct drm_bridge *bridge,
struct drm_atomic_state *old_state)
{
struct drm_encoder *encoder;
- struct drm_bridge *iter;
+ struct drm_bridge *iter, *next, *limit;
if (!bridge)
return;
encoder = bridge->encoder;
- list_for_each_entry_reverse(iter, &encoder->bridge_chain, chain_node) {
- if (iter->funcs->atomic_pre_enable) {
- struct drm_bridge_state *old_bridge_state;
- old_bridge_state =
- drm_atomic_get_old_bridge_state(old_state,
- iter);
- if (WARN_ON(!old_bridge_state))
- return;
+ list_for_each_entry_reverse(iter, &encoder->bridge_chain, chain_node) {
+ if (iter->pre_enable_upstream_first) {
+ next = iter;
+ limit = bridge;
+ list_for_each_entry_from_reverse(next,
+ &encoder->bridge_chain,
+ chain_node) {
+ if (next == bridge)
+ break;
+
+ if (!next->pre_enable_upstream_first) {
+ /* Found first bridge that does NOT
+ * request upstream to be enabled first
+ */
+ limit = list_prev_entry(next, chain_node);
+ break;
+ }
+ }
+
+ list_for_each_entry_from(next, &encoder->bridge_chain, chain_node) {
+ /* Call requested upstream bridge pre_enable
+ * in order.
+ */
+ if (next == iter)
+ /* At the first bridgge to request upstream
+ * bridges called first.
+ */
+ break;
- iter->funcs->atomic_pre_enable(iter, old_bridge_state);
- } else if (iter->funcs->pre_enable) {
- iter->funcs->pre_enable(iter);
+ drm_atomic_bridge_call_pre_enable(next, old_state);
+ }
}
+ drm_atomic_bridge_call_pre_enable(iter, old_state);
+
+ if (iter->pre_enable_upstream_first)
+ /* Jump all bridges that we have already pre_enabled
+ */
+ iter = limit;
+
if (iter == bridge)
break;
}
--- a/include/drm/drm_bridge.h
+++ b/include/drm/drm_bridge.h
@@ -769,6 +769,14 @@ struct drm_bridge {
*/
bool interlace_allowed;
/**
+ * @pre_enable_upstream_first: The bridge requires that the upstream
+ * bridge @pre_enable function is called before its @pre_enable,
+ * and conversely for post_disable. This is most frequently a
+ * requirement for DSI devices which need the host to be initialised
+ * before the peripheral.
+ */
+ bool pre_enable_upstream_first;
+ /**
* @ddc: Associated I2C adapter for DDC access, if any.
*/
struct i2c_adapter *ddc;

39
target/linux/bcm27xx/patches-6.1/950-0035-drm-panel-Add-prepare_upstream_first-flag-to-drm_pan.patch
View File

@ -1,32 +1,33 @@
From 9ac3eedd8cda7d5f2429edc0bdba137c35e07157 Mon Sep 17 00:00:00 2001
From 5ea6b17027810ffbdb5bea7d0a2b1d312dd1021c Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Wed, 23 Feb 2022 15:36:56 +0000
Subject: [PATCH] drm/panel: Add prepare_upstream_first flag to
drm_panel
Date: Mon, 5 Dec 2022 17:33:27 +0000
Subject: [PATCH] drm/panel: Add prepare_prev_first flag to drm_panel
Mapping to the drm_bridge flag pre_enable_upstream_first,
add a new flag prepare_upstream_first to drm_panel to allow
Mapping to the drm_bridge flag pre_enable_prev_first,
add a new flag prepare_prev_first to drm_panel to allow
the panel driver to request that the upstream bridge should
be pre_enabled before the panel prepare.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221205173328.1395350-6-dave.stevenson@raspberrypi.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/gpu/drm/bridge/panel.c | 3 +++
drivers/gpu/drm/bridge/panel.c | 2 ++
include/drm/drm_panel.h | 10 ++++++++++
2 files changed, 13 insertions(+)
2 files changed, 12 insertions(+)
--- a/drivers/gpu/drm/bridge/panel.c
+++ b/drivers/gpu/drm/bridge/panel.c
@@ -258,6 +258,9 @@ struct drm_bridge *drm_panel_bridge_add_
panel_bridge->bridge.ops = DRM_BRIDGE_OP_MODES;
panel_bridge->bridge.type = connector_type;
@@ -368,6 +368,8 @@ struct drm_bridge *devm_drm_panel_bridge
devres_free(ptr);
}
+ panel_bridge->bridge.pre_enable_upstream_first =
+ panel->prepare_upstream_first;
+ bridge->pre_enable_prev_first = panel->prepare_prev_first;
+
drm_bridge_add(&panel_bridge->bridge);
return &panel_bridge->bridge;
return bridge;
}
EXPORT_SYMBOL(devm_drm_panel_bridge_add_typed);
--- a/include/drm/drm_panel.h
+++ b/include/drm/drm_panel.h
@@ -196,6 +196,16 @@ struct drm_panel {
@ -35,14 +36,14 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
struct list_head list;
+
+ /**
+ * @prepare_upstream_first:
+ * @prepare_prev_first:
+ *
+ * The upstream controller should be prepared first, before the prepare
+ * The previous controller should be prepared first, before the prepare
+ * for the panel is called. This is largely required for DSI panels
+ * where the DSI host controller should be initialised to LP-11 before
+ * the panel is powered up.
+ */
+ bool prepare_upstream_first;
+ bool prepare_prev_first;
};
void drm_panel_init(struct drm_panel *panel, struct device *dev,

4
target/linux/bcm27xx/patches-6.1/950-0104-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch
View File

@ -20,7 +20,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -393,7 +393,7 @@ static const struct gpio_chip bcm2835_gp
@@ -391,7 +391,7 @@ static const struct gpio_chip bcm2835_gp
.get = bcm2835_gpio_get,
.set = bcm2835_gpio_set,
.set_config = gpiochip_generic_config,
@ -29,7 +29,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
.ngpio = BCM2835_NUM_GPIOS,
.can_sleep = false,
.of_gpio_ranges_fallback = bcm2835_of_gpio_ranges_fallback,
@@ -410,7 +410,7 @@ static const struct gpio_chip bcm2711_gp
@@ -408,7 +408,7 @@ static const struct gpio_chip bcm2711_gp
.get = bcm2835_gpio_get,
.set = bcm2835_gpio_set,
.set_config = gpiochip_generic_config,

6
target/linux/bcm27xx/patches-6.1/950-0111-MMC-added-alternative-MMC-driver.patch
View File

@ -325,7 +325,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
}
--- a/drivers/mmc/core/quirks.h
+++ b/drivers/mmc/core/quirks.h
@@ -106,6 +106,14 @@ static const struct mmc_fixup __maybe_un
@@ -129,6 +129,14 @@ static const struct mmc_fixup __maybe_un
MMC_FIXUP(CID_NAME_ANY, CID_MANFID_SANDISK_SD, 0x5344, add_quirk_sd,
MMC_QUIRK_BROKEN_SD_DISCARD),
@ -2007,9 +2007,9 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
sdhci_dumpregs(host);
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -295,6 +295,8 @@ struct mmc_card {
#define MMC_QUIRK_BROKEN_HPI (1<<13) /* Disable broken HPI support */
@@ -296,6 +296,8 @@ struct mmc_card {
#define MMC_QUIRK_BROKEN_SD_DISCARD (1<<14) /* Disable broken SD discard support */
#define MMC_QUIRK_BROKEN_SD_CACHE (1<<15) /* Disable broken SD cache support */
+#define MMC_QUIRK_ERASE_BROKEN (1<<31) /* Skip erase */
+

2
target/linux/bcm27xx/patches-6.1/950-0218-pinctrl-bcm2835-Remove-gpiochip-on-error.patch
View File

@ -14,7 +14,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -1357,7 +1357,7 @@ static int bcm2835_pinctrl_probe(struct
@@ -1355,7 +1355,7 @@ static int bcm2835_pinctrl_probe(struct
girq->default_type = IRQ_TYPE_NONE;
girq->handler = handle_level_irq;

10
target/linux/bcm27xx/patches-6.1/950-0328-staging-vchiq_arm-Add-36-bit-address-support.patch
View File

@ -158,14 +158,14 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
pagelistinfo->scatterlist_mapped = 0;
@@ -468,6 +515,7 @@ free_pagelist(struct vchiq_instance *ins
int vchiq_platform_init(struct platform_device *pdev, struct vchiq_state *state)
static int vchiq_platform_init(struct platform_device *pdev, struct vchiq_state *state)
{
struct device *dev = &pdev->dev;
+ struct device *dma_dev = NULL;
struct vchiq_drvdata *drvdata = platform_get_drvdata(pdev);
struct rpi_firmware *fw = drvdata->fw;
struct vchiq_slot_zero *vchiq_slot_zero;
@@ -489,6 +537,24 @@ int vchiq_platform_init(struct platform_
@@ -489,6 +537,24 @@ static int vchiq_platform_init(struct pl
g_cache_line_size = drvdata->cache_line_size;
g_fragments_size = 2 * g_cache_line_size;
@ -190,7 +190,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
/* Allocate space for the channels in coherent memory */
slot_mem_size = PAGE_ALIGN(TOTAL_SLOTS * VCHIQ_SLOT_SIZE);
frag_mem_size = PAGE_ALIGN(g_fragments_size * MAX_FRAGMENTS);
@@ -501,13 +567,14 @@ int vchiq_platform_init(struct platform_
@@ -501,13 +567,14 @@ static int vchiq_platform_init(struct pl
}
WARN_ON(((unsigned long)slot_mem & (PAGE_SIZE - 1)) != 0);
@ -206,7 +206,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
vchiq_slot_zero->platform_data[VCHIQ_PLATFORM_FRAGMENTS_COUNT_IDX] =
MAX_FRAGMENTS;
@@ -541,7 +608,6 @@ int vchiq_platform_init(struct platform_
@@ -541,7 +608,6 @@ static int vchiq_platform_init(struct pl
}
/* Send the base address of the slots to VideoCore */
@ -214,7 +214,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
err = rpi_firmware_property(fw, RPI_FIRMWARE_VCHIQ_INIT,
&channelbase, sizeof(channelbase));
if (err || channelbase) {
@@ -549,6 +615,8 @@ int vchiq_platform_init(struct platform_
@@ -549,6 +615,8 @@ static int vchiq_platform_init(struct pl
return err ? : -ENXIO;
}

2
target/linux/bcm27xx/patches-6.1/950-0330-staging-vchiq_arm-Usa-a-DMA-pool-for-small-bulks.patch
View File

@ -102,7 +102,7 @@ Signed-off-by: Oliver Gjoneski <ogjoneski@gmail.com>
pagelistinfo->dma_dir = (type == PAGELIST_WRITE) ?
DMA_TO_DEVICE : DMA_FROM_DEVICE;
pagelistinfo->num_pages = num_pages;
@@ -616,6 +634,13 @@ int vchiq_platform_init(struct platform_
@@ -616,6 +634,13 @@ static int vchiq_platform_init(struct pl
}
g_dma_dev = dma_dev ?: dev;

4
target/linux/bcm27xx/patches-6.1/950-0402-pinctrl-bcm2835-Only-return-non-GPIOs-to-inputs.patch
View File

@ -13,7 +13,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -928,9 +928,12 @@ static int bcm2835_pmx_free(struct pinct
@@ -926,9 +926,12 @@ static int bcm2835_pmx_free(struct pinct
unsigned offset)
{
struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
@ -28,7 +28,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
return 0;
}
@@ -972,10 +975,7 @@ static void bcm2835_pmx_gpio_disable_fre
@@ -970,10 +973,7 @@ static void bcm2835_pmx_gpio_disable_fre
struct pinctrl_gpio_range *range,
unsigned offset)
{

6
target/linux/bcm27xx/patches-6.1/950-0404-drm-panel-panel-ilitek9881c-Add-prepare_upstream_fir.patch
View File

@ -2,12 +2,12 @@ From 942d55434af46aebe8f5508995807253a6b235b3 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Thu, 31 Mar 2022 12:05:04 +0100
Subject: [PATCH] drm/panel: panel-ilitek9881c: Add
prepare_upstream_first flag
prepare_prev_first flag
The panel sends MIPI DCS commands during prepare and is expecting
the bus to remain in LP-11 state in-between.
Set the prepare_upstream_first flag so that the upstream DSI host
Set the prepare_prev_first flag so that the upstream DSI host
is prepared / pre_enabled first, and therefore the bus is in a
defined state.
@ -22,7 +22,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
ctx->dsi = dsi;
ctx->desc = of_device_get_match_data(&dsi->dev);
+ ctx->panel.prepare_upstream_first = true;
+ ctx->panel.prepare_prev_first = true;
drm_panel_init(&ctx->panel, &dsi->dev, &ili9881c_funcs,
DRM_MODE_CONNECTOR_DSI);

27
target/linux/bcm27xx/patches-6.1/950-0439-nvmem-Use-NVMEM_DEVID_AUTO.patch
View File

@ -1,27 +0,0 @@
From 10fcafcad54e1d055b6b67881a5b52b95dbd2da3 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Fri, 7 Oct 2022 10:38:31 +0100
Subject: [PATCH] nvmem: Use NVMEM_DEVID_AUTO
It is reasonable to declare multiple nvmem blocks. Unless a unique 'id'
is passed in for each block there may be name clashes.
Avoid this by using the magic token NVMEM_DEVID_AUTO.
Fixes: 5a3fa75a4d9cb ("nvmem: Add driver to expose reserved memory as nvmem")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
drivers/nvmem/rmem.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/nvmem/rmem.c
+++ b/drivers/nvmem/rmem.c
@@ -71,6 +71,7 @@ static int rmem_probe(struct platform_de
config.dev = dev;
config.priv = priv;
config.name = "rmem";
+ config.id = NVMEM_DEVID_AUTO;
config.size = mem->size;
config.reg_read = rmem_read;

14
target/linux/bcm27xx/patches-6.1/950-0699-Bluetooth-hci_sync-Add-fallback-bd-address-prop.patch
View File

@ -31,11 +31,11 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
@@ -4568,7 +4569,9 @@ static int hci_dev_setup_sync(struct hci
if (!ret) {
if (test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) {
- if (!bacmp(&hdev->public_addr, BDADDR_ANY))
+ if (!bacmp(&hdev->public_addr, BDADDR_ANY) &&
+ (invalid_bdaddr ||
+ !fwnode_property_present(fwnode, "fallback-bd-address")))
hci_dev_get_bd_addr_from_property(hdev);
if (test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks) &&
- !bacmp(&hdev->public_addr, BDADDR_ANY))
+ !bacmp(&hdev->public_addr, BDADDR_ANY) &&
+ (invalid_bdaddr ||
+ !fwnode_property_present(fwnode, "fallback-bd-address")))
hci_dev_get_bd_addr_from_property(hdev);
if (bacmp(&hdev->public_addr, BDADDR_ANY) &&
if ((invalid_bdaddr ||

4
target/linux/bcm27xx/patches-6.1/950-0704-pinctrl-bcm2835-Workaround-for-edge-IRQ-loss.patch
View File

@ -19,7 +19,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -422,15 +422,32 @@ static void bcm2835_gpio_irq_handle_bank
@@ -420,15 +420,32 @@ static void bcm2835_gpio_irq_handle_bank
unsigned long events;
unsigned offset;
unsigned gpio;
@ -52,7 +52,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
}
static void bcm2835_gpio_irq_handler(struct irq_desc *desc)
@@ -670,11 +687,7 @@ static int bcm2835_gpio_irq_set_type(str
@@ -668,11 +685,7 @@ static int bcm2835_gpio_irq_set_type(str
static void bcm2835_gpio_irq_ack(struct irq_data *data)
{

36
target/linux/bcm4908/patches-6.1/040-mtd-parsers-refer-to-ARCH_BCMBCA-instead-of-ARCH_BCM.patch
View File

@ -1,36 +0,0 @@
From 085679b15b5af65f9610f619afde41da0f966194 Mon Sep 17 00:00:00 2001
From: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Date: Wed, 16 Nov 2022 13:49:32 +0100
Subject: [PATCH] mtd: parsers: refer to ARCH_BCMBCA instead of ARCH_BCM4908
Commit dd5c672d7ca9 ("arm64: bcmbca: Merge ARCH_BCM4908 to ARCH_BCMBCA")
removes config ARCH_BCM4908 as config ARCH_BCMBCA has the same intent.
Probably due to concurrent development, commit 002181f5b150 ("mtd: parsers:
add Broadcom's U-Boot parser") introduces 'Broadcom's U-Boot partition
parser' that depends on ARCH_BCM4908, but this use was not visible during
the config refactoring from the commit above. Hence, these two changes
create a reference to a non-existing config symbol.
Adjust the MTD_BRCM_U_BOOT definition to refer to ARCH_BCMBCA instead of
ARCH_BCM4908 to remove the reference to the non-existing config symbol
ARCH_BCM4908.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20221116124932.4748-1-lukas.bulwahn@gmail.com
---
drivers/mtd/parsers/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mtd/parsers/Kconfig
+++ b/drivers/mtd/parsers/Kconfig
@@ -22,7 +22,7 @@ config MTD_BCM63XX_PARTS
config MTD_BRCM_U_BOOT
tristate "Broadcom's U-Boot partition parser"
- depends on ARCH_BCM4908 || COMPILE_TEST
+ depends on ARCH_BCMBCA || COMPILE_TEST
help
Broadcom uses a custom way of storing U-Boot environment variables.
They are placed inside U-Boot partition itself at unspecified offset.

2
target/linux/bcm53xx/patches-6.1/031-v6.5-0001-ARM-dts-BCM5301X-Relicense-Rafa-s-code-to-the-GPL-2..patch
View File

@ -460,7 +460,7 @@ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
};
};
@@ -558,24 +390,4 @@
@@ -557,24 +389,4 @@
};
};
};

32
target/linux/bcm53xx/patches-6.1/031-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch
View File

@ -1,32 +0,0 @@
From d3c8e2c5757153bbfad70019ec1decbca86f3def Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 3 May 2023 14:28:30 +0200
Subject: [PATCH] ARM: dts: BCM5301X: Drop "clock-names" from the SPI node
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
There is no such property in the SPI controller binding documentation.
Also Linux driver doesn't look for it.
This fixes:
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: spi@18029200: Unevaluated properties are not allowed ('clock-names' was unexpected)
From schema: Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230503122830.3200-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm5301x.dtsi | 1 -
1 file changed, 1 deletion(-)
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -335,7 +335,6 @@
"spi_lr_session_done",
"spi_lr_overread";
clocks = <&iprocmed>;
- clock-names = "iprocmed";
num-cs = <2>;
#address-cells = <1>;
#size-cells = <0>;

44
target/linux/bcm53xx/patches-6.1/031-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch
View File

@ -1,44 +0,0 @@
From fd274b733bfdde3ca72f0fa2a37f032f3a8c402c Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Thu, 8 Jun 2023 17:36:29 +0200
Subject: [PATCH] ARM: dts: BCM5301X: fix duplex-full => full-duplex
this typo was found by the dtbs_check
| ports:port@5:fixed-link: 'oneOf' conditional failed,
| {'speed': [[1000]], 'duplex-full': True} is not of type 'array'
| 'duplex-full' does not match any of the regexes: 'pinctrl-[0-]..."
this should have been full-duplex;
Fixes: 935327a73553 ("ARM: dts: BCM5301X: Add DT for Meraki MR26")
Fixes: ec88a9c344d9 ("ARM: BCM5301X: Add DT for Meraki MR32")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Link: https://lore.kernel.org/r/50522f45566951a9eabd22820647924cc6b4a264.1686238550.git.chunkeey@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
arch/arm/boot/dts/bcm53015-meraki-mr26.dts | 2 +-
arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
+++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
@@ -121,7 +121,7 @@
fixed-link {
speed = <1000>;
- duplex-full;
+ full-duplex;
};
};
};
--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
@@ -182,7 +182,7 @@
fixed-link {
speed = <1000>;
- duplex-full;
+ full-duplex;
};
};
};

2
target/linux/generic/backport-6.1/020-v6.3-10-UPSTREAM-mm-add-vma_has_recency.patch
View File

@ -87,7 +87,7 @@ Signed-off-by: T.J. Mercier <tjmercier@google.com>
mark_page_accessed(page);
}
rss[mm_counter(page)]--;
@@ -5182,8 +5181,8 @@ static inline void mm_account_fault(stru
@@ -5189,8 +5188,8 @@ static inline void mm_account_fault(stru
#ifdef CONFIG_LRU_GEN
static void lru_gen_enter_fault(struct vm_area_struct *vma)
{

35
target/linux/generic/backport-6.1/803-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch
View File

@ -1,35 +0,0 @@
From cee4bd16c3195a701be683f7da9e88c6e11acb73 Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Wed, 19 Apr 2023 23:07:39 +0200
Subject: [PATCH 1/5] leds: trigger: netdev: Recheck NETDEV_LED_MODE_LINKUP on
dev rename
Dev can be renamed also while up for supported device. We currently
wrongly clear the NETDEV_LED_MODE_LINKUP flag on NETDEV_CHANGENAME
event.
Fix this by rechecking if the carrier is ok on NETDEV_CHANGENAME and
correctly set the NETDEV_LED_MODE_LINKUP bit.
Fixes: 5f820ed52371 ("leds: trigger: netdev: fix handling on interface rename")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230419210743.3594-2-ansuelsmth@gmail.com
---
drivers/leds/trigger/ledtrig-netdev.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/leds/trigger/ledtrig-netdev.c
+++ b/drivers/leds/trigger/ledtrig-netdev.c
@@ -318,6 +318,9 @@ static int netdev_trig_notify(struct not
clear_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode);
switch (evt) {
case NETDEV_CHANGENAME:
+ if (netif_carrier_ok(dev))
+ set_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode);
+ fallthrough;
case NETDEV_REGISTER:
if (trigger_data->net_dev)
dev_put(trigger_data->net_dev);

12
target/linux/generic/hack-6.1/204-module_strip.patch
View File

@ -141,7 +141,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -1817,7 +1817,9 @@ static void read_symbols(const char *mod
@@ -1781,7 +1781,9 @@ static void read_symbols(const char *mod
symname = remove_dot(info.strtab + sym->st_name);
handle_symbol(mod, &info, sym, symname);
@ -151,7 +151,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
}
for (sym = info.symtab_start; sym < info.symtab_stop; sym++) {
@@ -1980,8 +1982,10 @@ static void add_header(struct buffer *b,
@@ -1944,8 +1946,10 @@ static void add_header(struct buffer *b,
buf_printf(b, "BUILD_SALT;\n");
buf_printf(b, "BUILD_LTO_INFO;\n");
buf_printf(b, "\n");
@ -162,7 +162,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
buf_printf(b, "\n");
buf_printf(b, "__visible struct module __this_module\n");
buf_printf(b, "__section(\".gnu.linkonce.this_module\") = {\n");
@@ -1995,8 +1999,10 @@ static void add_header(struct buffer *b,
@@ -1959,8 +1963,10 @@ static void add_header(struct buffer *b,
buf_printf(b, "\t.arch = MODULE_ARCH_INIT,\n");
buf_printf(b, "};\n");
@ -173,7 +173,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
buf_printf(b,
"\n"
@@ -2004,8 +2010,10 @@ static void add_header(struct buffer *b,
@@ -1968,8 +1974,10 @@ static void add_header(struct buffer *b,
"MODULE_INFO(retpoline, \"Y\");\n"
"#endif\n");
@ -184,7 +184,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (strstarts(mod->name, "tools/testing"))
buf_printf(b, "\nMODULE_INFO(test, \"Y\");\n");
@@ -2101,11 +2109,13 @@ static void add_depends(struct buffer *b
@@ -2065,11 +2073,13 @@ static void add_depends(struct buffer *b
static void add_srcversion(struct buffer *b, struct module *mod)
{
@ -198,7 +198,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
}
static void write_buf(struct buffer *b, const char *fname)
@@ -2191,7 +2201,9 @@ static void write_mod_c_file(struct modu
@@ -2155,7 +2165,9 @@ static void write_mod_c_file(struct modu
add_exported_symbols(&buf, mod);
add_versions(&buf, mod);
add_depends(&buf, mod);

2
target/linux/generic/hack-6.1/780-usb-net-MeigLink_modem_support.patch
View File

@ -29,7 +29,7 @@ Subject: [PATCH] net/usb/qmi_wwan: add MeigLink modem support
#define QUECTEL_VENDOR_ID 0x2c7c
/* These Quectel products use Quectel's vendor ID */
@@ -1173,6 +1175,11 @@ static const struct usb_device_id option
@@ -1177,6 +1179,11 @@ static const struct usb_device_id option
.driver_info = ZLP },
{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96),
.driver_info = RSVD(4) },

2
target/linux/generic/hack-6.1/902-debloat_proc.patch
View File

@ -330,7 +330,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -4082,6 +4082,8 @@ static __net_initdata struct pernet_oper
@@ -4093,6 +4093,8 @@ static __net_initdata struct pernet_oper
static int __init proto_init(void)
{

121
target/linux/generic/pending-6.1/143-jffs2-reduce-stack-usage-in-jffs2_build_xattr_subsys.patch
View File

@ -1,121 +0,0 @@
From eee53f6eb7561f516b9c4bac829ce31c48096130 Mon Sep 17 00:00:00 2001
From: Fabian Frederick <fabf@skynet.be>
Date: Tue, 9 May 2017 22:30:03 +0200
Subject: [PATCH] jffs2: reduce stack usage in jffs2_build_xattr_subsystem()
Use kcalloc() for allocation/flush of 128 pointers table to
reduce stack usage.
Function now returns -ENOMEM or 0 on success.
stackusage
Before:
./fs/jffs2/xattr.c:775 jffs2_build_xattr_subsystem 1208
dynamic,bounded
After:
./fs/jffs2/xattr.c:775 jffs2_build_xattr_subsystem 192
dynamic,bounded
Also update definition when CONFIG_JFFS2_FS_XATTR is not enabled
Tested with an MTD mount point and some user set/getfattr.
Many current target on OpenWRT also suffer from a compilation warning
(that become an error with CONFIG_WERROR) with the following output:
fs/jffs2/xattr.c: In function 'jffs2_build_xattr_subsystem':
fs/jffs2/xattr.c:887:1: error: the frame size of 1088 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
887 | }
| ^
Using dynamic allocation fix this compilation warning.
Fixes: c9f700f840bd ("[JFFS2][XATTR] using 'delete marker' for xdatum/xref deletion")
Reported-by: Tim Gardner <tim.gardner@canonical.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Ron Economos <re@w6rz.net>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
---
fs/jffs2/build.c | 5 ++++-
fs/jffs2/xattr.c | 13 +++++++++----
fs/jffs2/xattr.h | 4 ++--
3 files changed, 15 insertions(+), 7 deletions(-)
--- a/fs/jffs2/build.c
+++ b/fs/jffs2/build.c
@@ -211,7 +211,10 @@ static int jffs2_build_filesystem(struct
ic->scan_dents = NULL;
cond_resched();
}
- jffs2_build_xattr_subsystem(c);
+ ret = jffs2_build_xattr_subsystem(c);
+ if (ret)
+ goto exit;
+
c->flags &= ~JFFS2_SB_FLAG_BUILDING;
dbg_fsbuild("FS build complete\n");
--- a/fs/jffs2/xattr.c
+++ b/fs/jffs2/xattr.c
@@ -772,10 +772,10 @@ void jffs2_clear_xattr_subsystem(struct
}
#define XREF_TMPHASH_SIZE (128)
-void jffs2_build_xattr_subsystem(struct jffs2_sb_info *c)
+int jffs2_build_xattr_subsystem(struct jffs2_sb_info *c)
{
struct jffs2_xattr_ref *ref, *_ref;
- struct jffs2_xattr_ref *xref_tmphash[XREF_TMPHASH_SIZE];
+ struct jffs2_xattr_ref **xref_tmphash;
struct jffs2_xattr_datum *xd, *_xd;
struct jffs2_inode_cache *ic;
struct jffs2_raw_node_ref *raw;
@@ -784,9 +784,12 @@ void jffs2_build_xattr_subsystem(struct
BUG_ON(!(c->flags & JFFS2_SB_FLAG_BUILDING));
+ xref_tmphash = kcalloc(XREF_TMPHASH_SIZE,
+ sizeof(struct jffs2_xattr_ref *), GFP_KERNEL);
+ if (!xref_tmphash)
+ return -ENOMEM;
+
/* Phase.1 : Merge same xref */
- for (i=0; i < XREF_TMPHASH_SIZE; i++)
- xref_tmphash[i] = NULL;
for (ref=c->xref_temp; ref; ref=_ref) {
struct jffs2_xattr_ref *tmp;
@@ -884,6 +887,8 @@ void jffs2_build_xattr_subsystem(struct
"%u of xref (%u dead, %u orphan) found.\n",
xdatum_count, xdatum_unchecked_count, xdatum_orphan_count,
xref_count, xref_dead_count, xref_orphan_count);
+ kfree(xref_tmphash);
+ return 0;
}
struct jffs2_xattr_datum *jffs2_setup_xattr_datum(struct jffs2_sb_info *c,
--- a/fs/jffs2/xattr.h
+++ b/fs/jffs2/xattr.h
@@ -71,7 +71,7 @@ static inline int is_xattr_ref_dead(stru
#ifdef CONFIG_JFFS2_FS_XATTR
extern void jffs2_init_xattr_subsystem(struct jffs2_sb_info *c);
-extern void jffs2_build_xattr_subsystem(struct jffs2_sb_info *c);
+extern int jffs2_build_xattr_subsystem(struct jffs2_sb_info *c);
extern void jffs2_clear_xattr_subsystem(struct jffs2_sb_info *c);
extern struct jffs2_xattr_datum *jffs2_setup_xattr_datum(struct jffs2_sb_info *c,
@@ -103,7 +103,7 @@ extern ssize_t jffs2_listxattr(struct de
#else
#define jffs2_init_xattr_subsystem(c)
-#define jffs2_build_xattr_subsystem(c)
+#define jffs2_build_xattr_subsystem(c) (0)
#define jffs2_clear_xattr_subsystem(c)
#define jffs2_xattr_do_crccheck_inode(c, ic)

2
target/linux/generic/pending-6.1/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch
View File

@ -161,7 +161,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
struct rtnl_link {
rtnl_doit_func doit;
@@ -4817,7 +4817,9 @@ int ndo_dflt_bridge_getlink(struct sk_bu
@@ -4823,7 +4823,9 @@ int ndo_dflt_bridge_getlink(struct sk_bu
brport_nla_put_flag(skb, flags, mask,
IFLA_BRPORT_MCAST_FLOOD, BR_MCAST_FLOOD) ||
brport_nla_put_flag(skb, flags, mask,

6
target/linux/mediatek/patches-6.1/350-21-cpufreq-mediatek-Add-support-for-MT7988.patch
View File

@ -15,7 +15,7 @@ Signed-off-by: Sam Shih <sam.shih@mediatek.com>
--- a/drivers/cpufreq/mediatek-cpufreq.c
+++ b/drivers/cpufreq/mediatek-cpufreq.c
@@ -702,6 +702,15 @@ static const struct mtk_cpufreq_platform
@@ -709,6 +709,15 @@ static const struct mtk_cpufreq_platform
.ccifreq_supported = false,
};
@ -31,10 +31,10 @@ Signed-off-by: Sam Shih <sam.shih@mediatek.com>
static const struct mtk_cpufreq_platform_data mt8183_platform_data = {
.min_volt_shift = 100000,
.max_volt_shift = 200000,
@@ -735,6 +744,7 @@ static const struct of_device_id mtk_cpu
@@ -742,6 +751,7 @@ static const struct of_device_id mtk_cpu
{ .compatible = "mediatek,mt2712", .data = &mt2701_platform_data },
{ .compatible = "mediatek,mt7622", .data = &mt7622_platform_data },
{ .compatible = "mediatek,mt7623", .data = &mt7622_platform_data },
{ .compatible = "mediatek,mt7623", .data = &mt7623_platform_data },
+ { .compatible = "mediatek,mt7988", .data = &mt7988_platform_data },
{ .compatible = "mediatek,mt8167", .data = &mt8516_platform_data },
{ .compatible = "mediatek,mt817x", .data = &mt2701_platform_data },

53
target/linux/mediatek/patches-6.1/351-cpufreq-mediatek-correct-voltages-for-MT7622-and-MT7.patch
View File

@ -1,53 +0,0 @@
From e7697814c142c99f470c3458d49e41b25a575f23 Mon Sep 17 00:00:00 2001
From: Daniel Golle <daniel@makrotopia.org>
Date: Fri, 26 May 2023 10:31:40 +0100
Subject: [PATCH] cpufreq: mediatek: correct voltages for MT7622 and MT7623
The MT6380 regulator typically used together with MT7622 does not
support the current maximum processor and SRAM voltage in the cpufreq
driver (1360000uV).
For MT7622 limit processor and SRAM supply voltages to 1350000uV to
avoid having the tracking algorithm request unsupported voltages from
the regulator.
On MT7623 there is no separate SRAM supply and the maximum voltage used
is 1300000uV. Create dedicated platform data for MT7623 to cover that
case as well.
Fixes: 0883426fd07e3 ("cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623")
Suggested-by: Jia-wei Chang <Jia-wei.Chang@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
drivers/cpufreq/mediatek-cpufreq.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
--- a/drivers/cpufreq/mediatek-cpufreq.c
+++ b/drivers/cpufreq/mediatek-cpufreq.c
@@ -696,9 +696,16 @@ static const struct mtk_cpufreq_platform
static const struct mtk_cpufreq_platform_data mt7622_platform_data = {
.min_volt_shift = 100000,
.max_volt_shift = 200000,
- .proc_max_volt = 1360000,
+ .proc_max_volt = 1350000,
.sram_min_volt = 0,
- .sram_max_volt = 1360000,
+ .sram_max_volt = 1350000,
+ .ccifreq_supported = false,
+};
+
+static const struct mtk_cpufreq_platform_data mt7623_platform_data = {
+ .min_volt_shift = 100000,
+ .max_volt_shift = 200000,
+ .proc_max_volt = 1300000,
.ccifreq_supported = false,
};
@@ -743,7 +750,7 @@ static const struct of_device_id mtk_cpu
{ .compatible = "mediatek,mt2701", .data = &mt2701_platform_data },
{ .compatible = "mediatek,mt2712", .data = &mt2701_platform_data },
{ .compatible = "mediatek,mt7622", .data = &mt7622_platform_data },
- { .compatible = "mediatek,mt7623", .data = &mt7622_platform_data },
+ { .compatible = "mediatek,mt7623", .data = &mt7623_platform_data },
{ .compatible = "mediatek,mt7988", .data = &mt7988_platform_data },
{ .compatible = "mediatek,mt8167", .data = &mt8516_platform_data },
{ .compatible = "mediatek,mt817x", .data = &mt2701_platform_data },

59
target/linux/qualcommax/patches-6.1/0008-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch
View File

@ -1,59 +0,0 @@
From 813ba3e427671ba3ff35c825087b03f0ad91cf02 Mon Sep 17 00:00:00 2001
From: Robert Marko <robimarko@gmail.com>
Date: Mon, 7 Nov 2022 14:28:59 +0100
Subject: [PATCH] clk: qcom: reset: support resetting multiple bits
This patch adds the support for giving the complete bitmask
in reset structure and reset operation will use this bitmask
for all reset operations.
Currently, reset structure only takes a single bit for each reset
and then calculates the bitmask by using the BIT() macro.
However, this is not sufficient anymore for newer SoC-s like IPQ8074,
IPQ6018 and more, since their networking resets require multiple bits
to be asserted in order to properly reset the HW block completely.
So, in order to allow asserting multiple bits add "bitmask" field to
qcom_reset_map, and then use that bitmask value if its populated in the
driver, if its not populated, then we just default to existing behaviour
and calculate the bitmask on the fly.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107132901.489240-1-robimarko@gmail.com
---
drivers/clk/qcom/reset.c | 4 ++--
drivers/clk/qcom/reset.h | 1 +
2 files changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/clk/qcom/reset.c
+++ b/drivers/clk/qcom/reset.c
@@ -30,7 +30,7 @@ qcom_reset_assert(struct reset_controlle
rst = to_qcom_reset_controller(rcdev);
map = &rst->reset_map[id];
- mask = BIT(map->bit);
+ mask = map->bitmask ? map->bitmask : BIT(map->bit);
return regmap_update_bits(rst->regmap, map->reg, mask, mask);
}
@@ -44,7 +44,7 @@ qcom_reset_deassert(struct reset_control
rst = to_qcom_reset_controller(rcdev);
map = &rst->reset_map[id];
- mask = BIT(map->bit);
+ mask = map->bitmask ? map->bitmask : BIT(map->bit);
return regmap_update_bits(rst->regmap, map->reg, mask, 0);
}
--- a/drivers/clk/qcom/reset.h
+++ b/drivers/clk/qcom/reset.h
@@ -12,6 +12,7 @@ struct qcom_reset_map {
unsigned int reg;
u8 bit;
u8 udelay;
+ u32 bitmask;
};
struct regmap;

2
target/linux/qualcommax/patches-6.1/0020-v6.3-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch
View File

@ -16,7 +16,7 @@ Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1745,6 +1745,7 @@ static const struct of_device_id qcom_pc
@@ -1762,6 +1762,7 @@ static const struct of_device_id qcom_pc
{ .compatible = "qcom,pcie-ipq8064", .data = &cfg_2_1_0 },
{ .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 },
{ .compatible = "qcom,pcie-ipq8074", .data = &cfg_2_3_3 },

2
target/linux/qualcommax/patches-6.1/0132-mmc-core-disable-TRIM-on-Micron-MTFC4GACAJCN-1M.patch
View File

@ -20,7 +20,7 @@ Signed-off-by: Robert Marko <robimarko@gmail.com>
--- a/drivers/mmc/core/quirks.h
+++ b/drivers/mmc/core/quirks.h
@@ -101,6 +101,13 @@ static const struct mmc_fixup __maybe_un
@@ -124,6 +124,13 @@ static const struct mmc_fixup __maybe_un
MMC_QUIRK_TRIM_BROKEN),
/*

2
target/linux/qualcommax/patches-6.1/0133-mmc-core-disable-TRIM-on-Kingston-EMMC04G-M627.patch
View File

@ -22,7 +22,7 @@ Signed-off-by: Robert Marko <robimarko@gmail.com>
--- a/drivers/mmc/core/quirks.h
+++ b/drivers/mmc/core/quirks.h
@@ -108,6 +108,13 @@ static const struct mmc_fixup __maybe_un
@@ -131,6 +131,13 @@ static const struct mmc_fixup __maybe_un
MMC_QUIRK_TRIM_BROKEN),
/*