ath79: Add support for TP-Link Archer C25 v1
The TP-Link Archer C25 is a low-cost dual-band router. Specification: - CPU: Atheros QCA9561 775 MHz - RAM: 64 MB - Flash: 8 MB - Wifi: 3x3 2.4 GHz (integrated), 1x1 5 GHz QCA9887 - NET: 5x 10/100 Mbps Ethernet Some LEDs are controlled by an additional 74HC595 chip, but not all of them as e.g. for the C59. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Christian Lamparter
parent
409940cef4
commit
fde0abf267
|
|
@ -126,6 +126,16 @@ tplink,archer-c6-v2)
|
|||
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x3C"
|
||||
ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x02"
|
||||
;;
|
||||
tplink,archer-c25-v1|\
|
||||
tplink,tl-wr841-v9|\
|
||||
tplink,tl-wr841-v11|\
|
||||
tplink,tl-wr842n-v3)
|
||||
ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
|
||||
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
|
||||
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
|
||||
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
|
||||
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
|
||||
;;
|
||||
tplink,archer-c58-v1|\
|
||||
tplink,archer-c59-v1)
|
||||
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E"
|
||||
|
|
@ -175,15 +185,6 @@ tplink,tl-wr842n-v2)
|
|||
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
|
||||
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
|
||||
;;
|
||||
tplink,tl-wr841-v9|\
|
||||
tplink,tl-wr841-v11|\
|
||||
tplink,tl-wr842n-v3)
|
||||
ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
|
||||
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
|
||||
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
|
||||
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
|
||||
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
|
||||
;;
|
||||
ubnt,bullet-m|\
|
||||
ubnt,bullet-m-xw|\
|
||||
ubnt,nanostation-m|\
|
||||
|
|
|
|||
|
|
@ -68,6 +68,7 @@ ath79_setup_interfaces()
|
|||
"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
|
||||
;;
|
||||
buffalo,wzr-hp-ag300h|\
|
||||
tplink,archer-c25-v1|\
|
||||
tplink,tl-mr3220-v1|\
|
||||
tplink,tl-mr3420-v1|\
|
||||
tplink,tl-wr841-v7|\
|
||||
|
|
|
|||
|
|
@ -23,6 +23,10 @@ dlink,dir-835-a1)
|
|||
librerouter,librerouter-v1)
|
||||
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "1" "0"
|
||||
;;
|
||||
tplink,archer-c25-v1)
|
||||
ucidef_add_gpio_switch "led_control" "LED control" "21" "0"
|
||||
ucidef_add_gpio_switch "led_reset" "LED reset" "19" "1"
|
||||
;;
|
||||
ubnt,nanostation-ac)
|
||||
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "3"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -137,6 +137,10 @@ case "$FIRMWARE" in
|
|||
ath10kcal_extract "art" 20480 2116
|
||||
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
|
||||
;;
|
||||
tplink,archer-c25-v1)
|
||||
ath10kcal_extract "art" 20480 2116
|
||||
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 8) -1)
|
||||
;;
|
||||
tplink,archer-a7-v5|\
|
||||
tplink,archer-c2-v3|\
|
||||
tplink,archer-c7-v4|\
|
||||
|
|
|
|||
|
|
@ -0,0 +1,201 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "qca956x.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "tplink,archer-c25-v1", "qca,qca9561";
|
||||
model = "TP-Link Archer C25 v1";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8";
|
||||
};
|
||||
|
||||
led_spi {
|
||||
compatible = "spi-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
sck-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
|
||||
mosi-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
|
||||
cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
|
||||
num-chipselects = <1>;
|
||||
|
||||
/* can be removed on 4.19 */
|
||||
gpio-sck = <&gpio 15 GPIO_ACTIVE_HIGH>;
|
||||
gpio-mosi = <&gpio 14 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
led_gpio: led_gpio@0 {
|
||||
compatible = "fairchild,74hc595";
|
||||
reg = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
registers-number = <1>;
|
||||
spi-max-frequency = <10000000>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
wifi_button {
|
||||
label = "WiFi button";
|
||||
linux,code = <KEY_RFKILL>;
|
||||
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
reset_button {
|
||||
label = "Reset button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
led-boot = &power;
|
||||
led-failsafe = &power;
|
||||
led-running = &power;
|
||||
led-upgrade = &power;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
power: power {
|
||||
label = "tp-link:green:power";
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "tp-link:green:wps";
|
||||
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
label = "tp-link:green:wlan2g";
|
||||
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "tp-link:green:wlan5g";
|
||||
gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
wan_green {
|
||||
label = "tp-link:green:wan";
|
||||
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wan_amber {
|
||||
label = "tp-link:amber:wan";
|
||||
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan1 {
|
||||
label = "tp-link:green:lan1";
|
||||
gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan2 {
|
||||
label = "tp-link:green:lan2";
|
||||
gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan3 {
|
||||
label = "tp-link:green:lan3";
|
||||
gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan4 {
|
||||
label = "tp-link:green:lan4";
|
||||
gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "factory-boot";
|
||||
reg = <0x000000 0x020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
label = "u-boot";
|
||||
reg = <0x020000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x030000 0x7a0000>;
|
||||
};
|
||||
|
||||
config: partition@7d0000 {
|
||||
label = "config";
|
||||
reg = <0x7d0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
info: partition@7e0000 {
|
||||
label = "info";
|
||||
reg = <0x7e0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
art: partition@7f0000 {
|
||||
label = "art";
|
||||
reg = <0x7f0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð0 {
|
||||
phy-mode = "mii";
|
||||
phy-handle = <&swphy4>;
|
||||
|
||||
status = "okay";
|
||||
mtd-mac-address = <&info 0x8>;
|
||||
};
|
||||
|
||||
ð1 {
|
||||
status = "okay";
|
||||
mtd-mac-address = <&info 0x8>;
|
||||
mtd-mac-address-increment = <1>;
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
mtd-cal-data = <&art 0x1000>;
|
||||
mtd-mac-address = <&info 0x8>;
|
||||
};
|
||||
|
|
@ -22,6 +22,17 @@ define Device/tplink_archer-c2-v3
|
|||
endef
|
||||
TARGET_DEVICES += tplink_archer-c2-v3
|
||||
|
||||
define Device/tplink_archer-c25-v1
|
||||
$(Device/tplink-safeloader-uimage)
|
||||
ATH_SOC := qca9561
|
||||
IMAGE_SIZE := 7808k
|
||||
DEVICE_TITLE := TP-Link Archer C25 v1
|
||||
TPLINK_BOARD_ID := ARCHER-C25-V1
|
||||
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
|
||||
SUPPORTED_DEVICES += archer-c25-v1
|
||||
endef
|
||||
TARGET_DEVICES += tplink_archer-c25-v1
|
||||
|
||||
define Device/tplink_archer-c58-v1
|
||||
$(Device/tplink-safeloader-uimage)
|
||||
ATH_SOC := qca9561
|
||||
|
|
|
|||
Loading…
Reference in New Issue