mirror
/
openwrt
mirror of https://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Releases Activity

kernel: 5.10: backport qca8k feature additions 

Backport Ansuel Smith's various qca8k feature additions:
- mac-power-sel support
- SGMII PLL explicit enable
- tx/rx clock phase to falling edge
- power-on-sel and LED open drain mode
- cpu port 6
- qca8328 support
- sgmii internal delay
- move port config to dedicated struct
- convert to yaml schema

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
This commit is contained in:
Matthew Hagan 2021-09-09 19:40:21 +00:00 committed by Hauke Mehrtens
parent d888ef5668
commit f97cafdd1d
16 changed files with 1991 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

80
target/linux/generic/backport-5.10/797-v5.16-01-dsa-qca8k-add-mac-power-sel-support.patch Normal file
View File

@ -0,0 +1,80 @@
From d8b6f5bae6d3b648a67b6958cb98e4e97256d652 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Thu, 14 Oct 2021 00:39:06 +0200
Subject: dsa: qca8k: add mac_power_sel support
Add missing mac power sel support needed for ipq8064/5 SoC that require
1.8v for the internal regulator port instead of the default 1.5v.
If other device needs this, consider adding a dedicated binding to
support this.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/dsa/qca8k.c | 31 +++++++++++++++++++++++++++++++
drivers/net/dsa/qca8k.h | 5 +++++
2 files changed, 36 insertions(+)
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -951,6 +951,33 @@ qca8k_setup_of_rgmii_delay(struct qca8k_
}
static int
+qca8k_setup_mac_pwr_sel(struct qca8k_priv *priv)
+{
+ u32 mask = 0;
+ int ret = 0;
+
+ /* SoC specific settings for ipq8064.
+ * If more device require this consider adding
+ * a dedicated binding.
+ */
+ if (of_machine_is_compatible("qcom,ipq8064"))
+ mask |= QCA8K_MAC_PWR_RGMII0_1_8V;
+
+ /* SoC specific settings for ipq8065 */
+ if (of_machine_is_compatible("qcom,ipq8065"))
+ mask |= QCA8K_MAC_PWR_RGMII1_1_8V;
+
+ if (mask) {
+ ret = qca8k_rmw(priv, QCA8K_REG_MAC_PWR_SEL,
+ QCA8K_MAC_PWR_RGMII0_1_8V |
+ QCA8K_MAC_PWR_RGMII1_1_8V,
+ mask);
+ }
+
+ return ret;
+}
+
+static int
qca8k_setup(struct dsa_switch *ds)
{
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
@@ -979,6 +1006,10 @@ qca8k_setup(struct dsa_switch *ds)
if (ret)
return ret;
+ ret = qca8k_setup_mac_pwr_sel(priv);
+ if (ret)
+ return ret;
+
/* Enable CPU Port */
ret = qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0,
QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -100,6 +100,11 @@
#define QCA8K_SGMII_MODE_CTRL_PHY (1 << 22)
#define QCA8K_SGMII_MODE_CTRL_MAC (2 << 22)
+/* MAC_PWR_SEL registers */
+#define QCA8K_REG_MAC_PWR_SEL 0x0e4
+#define QCA8K_MAC_PWR_RGMII1_1_8V BIT(18)
+#define QCA8K_MAC_PWR_RGMII0_1_8V BIT(19)
+
/* EEE control registers */
#define QCA8K_REG_EEE_CTRL 0x100
#define QCA8K_REG_EEE_CTRL_LPI_EN(_i) ((_i + 1) * 2)

30
target/linux/generic/backport-5.10/797-v5.16-02-dt-bindings-net-dsa-qca8k-Add-SGMII-clock-phase-prop.patch Normal file
View File

@ -0,0 +1,30 @@
From fdbf35df9c091db9c46e57e9938e3f7a4f603a7c Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Thu, 14 Oct 2021 00:39:07 +0200
Subject: dt-bindings: net: dsa: qca8k: Add SGMII clock phase properties
Add names and descriptions of additional PORT0_PAD_CTRL properties.
qca,sgmii-(rx|tx)clk-falling-edge are for setting the respective clock
phase to failling edge.
Co-developed-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
Documentation/devicetree/bindings/net/dsa/qca8k.txt | 4 ++++
1 file changed, 4 insertions(+)
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
@@ -37,6 +37,10 @@ A CPU port node has the following option
managed entity. See
Documentation/devicetree/bindings/net/fixed-link.txt
for details.
+- qca,sgmii-rxclk-falling-edge: Set the receive clock phase to falling edge.
+ Mostly used in qca8327 with CPU port 0 set to
+ sgmii.
+- qca,sgmii-txclk-falling-edge: Set the transmit clock phase to falling edge.
For QCA8K the 'fixed-link' sub-node supports only the following properties:

127
target/linux/generic/backport-5.10/797-v5.16-03-net-dsa-qca8k-add-support-for-sgmii-falling-edge.patch Normal file
View File

@ -0,0 +1,127 @@
From 6c43809bf1bee76c434e365a26546a92a5fbec14 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Thu, 14 Oct 2021 00:39:08 +0200
Subject: net: dsa: qca8k: add support for sgmii falling edge
Add support for this in the qca8k driver. Also add support for SGMII
rx/tx clock falling edge. This is only present for pad0, pad5 and
pad6 have these bit reserved from Documentation. Add a comment that this
is hardcoded to PAD0 as qca8327/28/34/37 have an unique sgmii line and
setting falling in port0 applies to both configuration with sgmii used
for port0 or port6.
Co-developed-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/dsa/qca8k.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/dsa/qca8k.h | 4 ++++
2 files changed, 67 insertions(+)
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -978,6 +978,42 @@ qca8k_setup_mac_pwr_sel(struct qca8k_pri
}
static int
+qca8k_parse_port_config(struct qca8k_priv *priv)
+{
+ struct device_node *port_dn;
+ phy_interface_t mode;
+ struct dsa_port *dp;
+ int port, ret;
+
+ /* We have 2 CPU port. Check them */
+ for (port = 0; port < QCA8K_NUM_PORTS; port++) {
+ /* Skip every other port */
+ if (port != 0 && port != 6)
+ continue;
+
+ dp = dsa_to_port(priv->ds, port);
+ port_dn = dp->dn;
+
+ if (!of_device_is_available(port_dn))
+ continue;
+
+ ret = of_get_phy_mode(port_dn, &mode);
+ if (ret)
+ continue;
+
+ if (mode == PHY_INTERFACE_MODE_SGMII) {
+ if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge"))
+ priv->sgmii_tx_clk_falling_edge = true;
+
+ if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge"))
+ priv->sgmii_rx_clk_falling_edge = true;
+ }
+ }
+
+ return 0;
+}
+
+static int
qca8k_setup(struct dsa_switch *ds)
{
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
@@ -990,6 +1026,11 @@ qca8k_setup(struct dsa_switch *ds)
return -EINVAL;
}
+ /* Parse CPU port config to be later used in phy_link mac_config */
+ ret = qca8k_parse_port_config(priv);
+ if (ret)
+ return ret;
+
mutex_init(&priv->reg_mutex);
/* Start by setting up the register mapping */
@@ -1274,6 +1315,28 @@ qca8k_phylink_mac_config(struct dsa_swit
}
qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val);
+
+ /* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and
+ * falling edge is set writing in the PORT0 PAD reg
+ */
+ if (priv->switch_id == QCA8K_ID_QCA8327 ||
+ priv->switch_id == QCA8K_ID_QCA8337)
+ reg = QCA8K_REG_PORT0_PAD_CTRL;
+
+ val = 0;
+
+ /* SGMII Clock phase configuration */
+ if (priv->sgmii_rx_clk_falling_edge)
+ val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE;
+
+ if (priv->sgmii_tx_clk_falling_edge)
+ val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE;
+
+ if (val)
+ ret = qca8k_rmw(priv, reg,
+ QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE |
+ QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE,
+ val);
break;
default:
dev_err(ds->dev, "xMII mode %s not supported for port %d\n",
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -35,6 +35,8 @@
#define QCA8K_MASK_CTRL_DEVICE_ID_MASK GENMASK(15, 8)
#define QCA8K_MASK_CTRL_DEVICE_ID(x) ((x) >> 8)
#define QCA8K_REG_PORT0_PAD_CTRL 0x004
+#define QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE BIT(19)
+#define QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE BIT(18)
#define QCA8K_REG_PORT5_PAD_CTRL 0x008
#define QCA8K_REG_PORT6_PAD_CTRL 0x00c
#define QCA8K_PORT_PAD_RGMII_EN BIT(26)
@@ -260,6 +262,8 @@ struct qca8k_priv {
u8 switch_revision;
u8 rgmii_tx_delay;
u8 rgmii_rx_delay;
+ bool sgmii_rx_clk_falling_edge;
+ bool sgmii_tx_clk_falling_edge;
bool legacy_phy_port_mapping;
struct regmap *regmap;
struct mii_bus *bus;

29
target/linux/generic/backport-5.10/797-v5.16-04-dt-bindings-net-dsa-qca8k-Document-support-for-CPU-p.patch Normal file
View File

@ -0,0 +1,29 @@
From 731d613338ec6de482053ffa3f71be2325b0f8eb Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Thu, 14 Oct 2021 00:39:09 +0200
Subject: dt-bindings: net: dsa: qca8k: Document support for CPU port 6
The switch now support CPU port to be set 6 instead of be hardcoded to
0. Document support for it and describe logic selection.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
Documentation/devicetree/bindings/net/dsa/qca8k.txt | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
@@ -29,7 +29,11 @@ the mdio MASTER is used as communication
Don't use mixed external and internal mdio-bus configurations, as this is
not supported by the hardware.
-The CPU port of this switch is always port 0.
+This switch support 2 CPU port. Normally and advised configuration is with
+CPU port set to port 0. It is also possible to set the CPU port to port 6
+if the device requires it. The driver will configure the switch to the defined
+port. With both CPU port declared the first CPU port is selected as primary
+and the secondary CPU ignored.
A CPU port node has the following optional node:

153
target/linux/generic/backport-5.10/797-v5.16-05-net-dsa-qca8k-add-support-for-cpu-port-6.patch Normal file
View File

@ -0,0 +1,153 @@
From 3fcf734aa482487df83cf8f18608438fcf59127f Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Thu, 14 Oct 2021 00:39:10 +0200
Subject: net: dsa: qca8k: add support for cpu port 6
Currently CPU port is always hardcoded to port 0. This switch have 2 CPU
ports. The original intention of this driver seems to be use the
mac06_exchange bit to swap MAC0 with MAC6 in the strange configuration
where device have connected only the CPU port 6. To skip the
introduction of a new binding, rework the driver to address the
secondary CPU port as primary and drop any reference of hardcoded port.
With configuration of mac06 exchange, just skip the definition of port0
and define the CPU port as a secondary. The driver will autoconfigure
the switch to use that as the primary CPU port.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/dsa/qca8k.c | 51 ++++++++++++++++++++++++++++++++++---------------
drivers/net/dsa/qca8k.h | 2 --
2 files changed, 36 insertions(+), 17 deletions(-)
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -977,6 +977,22 @@ qca8k_setup_mac_pwr_sel(struct qca8k_pri
return ret;
}
+static int qca8k_find_cpu_port(struct dsa_switch *ds)
+{
+ struct qca8k_priv *priv = ds->priv;
+
+ /* Find the connected cpu port. Valid port are 0 or 6 */
+ if (dsa_is_cpu_port(ds, 0))
+ return 0;
+
+ dev_dbg(priv->dev, "port 0 is not the CPU port. Checking port 6");
+
+ if (dsa_is_cpu_port(ds, 6))
+ return 6;
+
+ return -EINVAL;
+}
+
static int
qca8k_parse_port_config(struct qca8k_priv *priv)
{
@@ -1017,13 +1033,13 @@ static int
qca8k_setup(struct dsa_switch *ds)
{
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
- int ret, i;
+ int cpu_port, ret, i;
u32 mask;
- /* Make sure that port 0 is the cpu port */
- if (!dsa_is_cpu_port(ds, 0)) {
- dev_err(priv->dev, "port 0 is not the CPU port");
- return -EINVAL;
+ cpu_port = qca8k_find_cpu_port(ds);
+ if (cpu_port < 0) {
+ dev_err(priv->dev, "No cpu port configured in both cpu port0 and port6");
+ return cpu_port;
}
/* Parse CPU port config to be later used in phy_link mac_config */
@@ -1065,7 +1081,7 @@ qca8k_setup(struct dsa_switch *ds)
dev_warn(priv->dev, "mib init failed");
/* Enable QCA header mode on the cpu port */
- ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(QCA8K_CPU_PORT),
+ ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(cpu_port),
QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S |
QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S);
if (ret) {
@@ -1087,10 +1103,10 @@ qca8k_setup(struct dsa_switch *ds)
/* Forward all unknown frames to CPU port for Linux processing */
ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
- BIT(0) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S |
- BIT(0) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S |
- BIT(0) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S |
- BIT(0) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S);
+ BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S |
+ BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S |
+ BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S |
+ BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S);
if (ret)
return ret;
@@ -1098,7 +1114,7 @@ qca8k_setup(struct dsa_switch *ds)
for (i = 0; i < QCA8K_NUM_PORTS; i++) {
/* CPU port gets connected to all user ports of the switch */
if (dsa_is_cpu_port(ds, i)) {
- ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(QCA8K_CPU_PORT),
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(cpu_port),
QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
if (ret)
return ret;
@@ -1110,7 +1126,7 @@ qca8k_setup(struct dsa_switch *ds)
ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
QCA8K_PORT_LOOKUP_MEMBER,
- BIT(QCA8K_CPU_PORT));
+ BIT(cpu_port));
if (ret)
return ret;
@@ -1616,9 +1632,12 @@ static int
qca8k_port_bridge_join(struct dsa_switch *ds, int port, struct net_device *br)
{
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
- int port_mask = BIT(QCA8K_CPU_PORT);
+ int port_mask, cpu_port;
int i, ret;
+ cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
+ port_mask = BIT(cpu_port);
+
for (i = 1; i < QCA8K_NUM_PORTS; i++) {
if (dsa_to_port(ds, i)->bridge_dev != br)
continue;
@@ -1645,7 +1664,9 @@ static void
qca8k_port_bridge_leave(struct dsa_switch *ds, int port, struct net_device *br)
{
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
- int i;
+ int cpu_port, i;
+
+ cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
for (i = 1; i < QCA8K_NUM_PORTS; i++) {
if (dsa_to_port(ds, i)->bridge_dev != br)
@@ -1662,7 +1683,7 @@ qca8k_port_bridge_leave(struct dsa_switc
* this port
*/
qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
- QCA8K_PORT_LOOKUP_MEMBER, BIT(QCA8K_CPU_PORT));
+ QCA8K_PORT_LOOKUP_MEMBER, BIT(cpu_port));
}
static int
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -24,8 +24,6 @@
#define QCA8K_NUM_FDB_RECORDS 2048
-#define QCA8K_CPU_PORT 0
-
#define QCA8K_PORT_VID_DEF 1
/* Global control registers */

295
target/linux/generic/backport-5.10/797-v5.16-06-net-dsa-qca8k-rework-rgmii-delay-logic-and-scan-for-.patch Normal file
View File

@ -0,0 +1,295 @@
From 5654ec78dd7e64b1e04777b24007344329e6a63b Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Thu, 14 Oct 2021 00:39:11 +0200
Subject: net: dsa: qca8k: rework rgmii delay logic and scan for cpu port 6
Future proof commit. This switch have 2 CPU ports and one valid
configuration is first CPU port set to sgmii and second CPU port set to
rgmii-id. The current implementation detects delay only for CPU port
zero set to rgmii and doesn't count any delay set in a secondary CPU
port. Drop the current delay scan function and move it to the sgmii
parser function to generalize and implicitly add support for secondary
CPU port set to rgmii-id. Introduce new logic where delay is enabled
also with internal delay binding declared and rgmii set as PHY mode.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/dsa/qca8k.c | 165 ++++++++++++++++++++++++------------------------
drivers/net/dsa/qca8k.h | 10 ++-
2 files changed, 89 insertions(+), 86 deletions(-)
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -889,68 +889,6 @@ qca8k_setup_mdio_bus(struct qca8k_priv *
}
static int
-qca8k_setup_of_rgmii_delay(struct qca8k_priv *priv)
-{
- struct device_node *port_dn;
- phy_interface_t mode;
- struct dsa_port *dp;
- u32 val;
-
- /* CPU port is already checked */
- dp = dsa_to_port(priv->ds, 0);
-
- port_dn = dp->dn;
-
- /* Check if port 0 is set to the correct type */
- of_get_phy_mode(port_dn, &mode);
- if (mode != PHY_INTERFACE_MODE_RGMII_ID &&
- mode != PHY_INTERFACE_MODE_RGMII_RXID &&
- mode != PHY_INTERFACE_MODE_RGMII_TXID) {
- return 0;
- }
-
- switch (mode) {
- case PHY_INTERFACE_MODE_RGMII_ID:
- case PHY_INTERFACE_MODE_RGMII_RXID:
- if (of_property_read_u32(port_dn, "rx-internal-delay-ps", &val))
- val = 2;
- else
- /* Switch regs accept value in ns, convert ps to ns */
- val = val / 1000;
-
- if (val > QCA8K_MAX_DELAY) {
- dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value");
- val = 3;
- }
-
- priv->rgmii_rx_delay = val;
- /* Stop here if we need to check only for rx delay */
- if (mode != PHY_INTERFACE_MODE_RGMII_ID)
- break;
-
- fallthrough;
- case PHY_INTERFACE_MODE_RGMII_TXID:
- if (of_property_read_u32(port_dn, "tx-internal-delay-ps", &val))
- val = 1;
- else
- /* Switch regs accept value in ns, convert ps to ns */
- val = val / 1000;
-
- if (val > QCA8K_MAX_DELAY) {
- dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value");
- val = 3;
- }
-
- priv->rgmii_tx_delay = val;
- break;
- default:
- return 0;
- }
-
- return 0;
-}
-
-static int
qca8k_setup_mac_pwr_sel(struct qca8k_priv *priv)
{
u32 mask = 0;
@@ -996,19 +934,21 @@ static int qca8k_find_cpu_port(struct ds
static int
qca8k_parse_port_config(struct qca8k_priv *priv)
{
+ int port, cpu_port_index = 0, ret;
struct device_node *port_dn;
phy_interface_t mode;
struct dsa_port *dp;
- int port, ret;
+ u32 delay;
/* We have 2 CPU port. Check them */
- for (port = 0; port < QCA8K_NUM_PORTS; port++) {
+ for (port = 0; port < QCA8K_NUM_PORTS && cpu_port_index < QCA8K_NUM_CPU_PORTS; port++) {
/* Skip every other port */
if (port != 0 && port != 6)
continue;
dp = dsa_to_port(priv->ds, port);
port_dn = dp->dn;
+ cpu_port_index++;
if (!of_device_is_available(port_dn))
continue;
@@ -1017,12 +957,54 @@ qca8k_parse_port_config(struct qca8k_pri
if (ret)
continue;
- if (mode == PHY_INTERFACE_MODE_SGMII) {
+ switch (mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ delay = 0;
+
+ if (!of_property_read_u32(port_dn, "tx-internal-delay-ps", &delay))
+ /* Switch regs accept value in ns, convert ps to ns */
+ delay = delay / 1000;
+ else if (mode == PHY_INTERFACE_MODE_RGMII_ID ||
+ mode == PHY_INTERFACE_MODE_RGMII_TXID)
+ delay = 1;
+
+ if (delay > QCA8K_MAX_DELAY) {
+ dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value");
+ delay = 3;
+ }
+
+ priv->rgmii_tx_delay[cpu_port_index] = delay;
+
+ delay = 0;
+
+ if (!of_property_read_u32(port_dn, "rx-internal-delay-ps", &delay))
+ /* Switch regs accept value in ns, convert ps to ns */
+ delay = delay / 1000;
+ else if (mode == PHY_INTERFACE_MODE_RGMII_ID ||
+ mode == PHY_INTERFACE_MODE_RGMII_RXID)
+ delay = 2;
+
+ if (delay > QCA8K_MAX_DELAY) {
+ dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value");
+ delay = 3;
+ }
+
+ priv->rgmii_rx_delay[cpu_port_index] = delay;
+
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge"))
priv->sgmii_tx_clk_falling_edge = true;
if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge"))
priv->sgmii_rx_clk_falling_edge = true;
+
+ break;
+ default:
+ continue;
}
}
@@ -1059,10 +1041,6 @@ qca8k_setup(struct dsa_switch *ds)
if (ret)
return ret;
- ret = qca8k_setup_of_rgmii_delay(priv);
- if (ret)
- return ret;
-
ret = qca8k_setup_mac_pwr_sel(priv);
if (ret)
return ret;
@@ -1229,8 +1207,8 @@ qca8k_phylink_mac_config(struct dsa_swit
const struct phylink_link_state *state)
{
struct qca8k_priv *priv = ds->priv;
- u32 reg, val;
- int ret;
+ int cpu_port_index, ret;
+ u32 reg, val, delay;
switch (port) {
case 0: /* 1st CPU port */
@@ -1242,6 +1220,7 @@ qca8k_phylink_mac_config(struct dsa_swit
return;
reg = QCA8K_REG_PORT0_PAD_CTRL;
+ cpu_port_index = QCA8K_CPU_PORT0;
break;
case 1:
case 2:
@@ -1260,6 +1239,7 @@ qca8k_phylink_mac_config(struct dsa_swit
return;
reg = QCA8K_REG_PORT6_PAD_CTRL;
+ cpu_port_index = QCA8K_CPU_PORT6;
break;
default:
dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port);
@@ -1274,23 +1254,40 @@ qca8k_phylink_mac_config(struct dsa_swit
switch (state->interface) {
case PHY_INTERFACE_MODE_RGMII:
- /* RGMII mode means no delay so don't enable the delay */
- qca8k_write(priv, reg, QCA8K_PORT_PAD_RGMII_EN);
- break;
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_RGMII_RXID:
- /* RGMII_ID needs internal delay. This is enabled through
- * PORT5_PAD_CTRL for all ports, rather than individual port
- * registers
+ val = QCA8K_PORT_PAD_RGMII_EN;
+
+ /* Delay can be declared in 3 different way.
+ * Mode to rgmii and internal-delay standard binding defined
+ * rgmii-id or rgmii-tx/rx phy mode set.
+ * The parse logic set a delay different than 0 only when one
+ * of the 3 different way is used. In all other case delay is
+ * not enabled. With ID or TX/RXID delay is enabled and set
+ * to the default and recommended value.
+ */
+ if (priv->rgmii_tx_delay[cpu_port_index]) {
+ delay = priv->rgmii_tx_delay[cpu_port_index];
+
+ val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) |
+ QCA8K_PORT_PAD_RGMII_TX_DELAY_EN;
+ }
+
+ if (priv->rgmii_rx_delay[cpu_port_index]) {
+ delay = priv->rgmii_rx_delay[cpu_port_index];
+
+ val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) |
+ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN;
+ }
+
+ /* Set RGMII delay based on the selected values */
+ qca8k_write(priv, reg, val);
+
+ /* QCA8337 requires to set rgmii rx delay for all ports.
+ * This is enabled through PORT5_PAD_CTRL for all ports,
+ * rather than individual port registers.
*/
- qca8k_write(priv, reg,
- QCA8K_PORT_PAD_RGMII_EN |
- QCA8K_PORT_PAD_RGMII_TX_DELAY(priv->rgmii_tx_delay) |
- QCA8K_PORT_PAD_RGMII_RX_DELAY(priv->rgmii_rx_delay) |
- QCA8K_PORT_PAD_RGMII_TX_DELAY_EN |
- QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
- /* QCA8337 requires to set rgmii rx delay */
if (priv->switch_id == QCA8K_ID_QCA8337)
qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -13,6 +13,7 @@
#include <linux/gpio.h>
#define QCA8K_NUM_PORTS 7
+#define QCA8K_NUM_CPU_PORTS 2
#define QCA8K_MAX_MTU 9000
#define PHY_ID_QCA8327 0x004dd034
@@ -255,13 +256,18 @@ struct qca8k_match_data {
u8 id;
};
+enum {
+ QCA8K_CPU_PORT0,
+ QCA8K_CPU_PORT6,
+};
+
struct qca8k_priv {
u8 switch_id;
u8 switch_revision;
- u8 rgmii_tx_delay;
- u8 rgmii_rx_delay;
bool sgmii_rx_clk_falling_edge;
bool sgmii_tx_clk_falling_edge;
+ u8 rgmii_rx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
+ u8 rgmii_tx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
bool legacy_phy_port_mapping;
struct regmap *regmap;
struct mii_bus *bus;

33
target/linux/generic/backport-5.10/797-v5.16-07-dt-bindings-net-dsa-qca8k-Document-qca-sgmii-enable-.patch Normal file
View File

@ -0,0 +1,33 @@
From 13ad5ccc093ff448b99ac7e138e91e78796adb48 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Thu, 14 Oct 2021 00:39:12 +0200
Subject: dt-bindings: net: dsa: qca8k: Document qca,sgmii-enable-pll
Document qca,sgmii-enable-pll binding used in the CPU nodes to
enable SGMII PLL on MAC config.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
Documentation/devicetree/bindings/net/dsa/qca8k.txt | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
@@ -45,6 +45,16 @@ A CPU port node has the following option
Mostly used in qca8327 with CPU port 0 set to
sgmii.
- qca,sgmii-txclk-falling-edge: Set the transmit clock phase to falling edge.
+- qca,sgmii-enable-pll : For SGMII CPU port, explicitly enable PLL, TX and RX
+ chain along with Signal Detection.
+ This should NOT be enabled for qca8327. If enabled with
+ qca8327 the sgmii port won't correctly init and an err
+ is printed.
+ This can be required for qca8337 switch with revision 2.
+ A warning is displayed when used with revision greater
+ 2.
+ With CPU port set to sgmii and qca8337 it is advised
+ to set this unless a communication problem is observed.
For QCA8K the 'fixed-link' sub-node supports only the following properties:

65
target/linux/generic/backport-5.10/797-v5.16-08-net-dsa-qca8k-add-explicit-SGMII-PLL-enable.patch Normal file
View File

@ -0,0 +1,65 @@
From bbc4799e8bb6c397e3b3fec13de68e179f5db9ff Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Thu, 14 Oct 2021 00:39:13 +0200
Subject: net: dsa: qca8k: add explicit SGMII PLL enable
Support enabling PLL on the SGMII CPU port. Some device require this
special configuration or no traffic is transmitted and the switch
doesn't work at all. A dedicated binding is added to the CPU node
port to apply the correct reg on mac config.
Fail to correctly configure sgmii with qca8327 switch and warn if pll is
used on qca8337 with a revision greater than 1.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/dsa/qca8k.c | 19 +++++++++++++++++--
drivers/net/dsa/qca8k.h | 1 +
2 files changed, 18 insertions(+), 2 deletions(-)
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1002,6 +1002,18 @@ qca8k_parse_port_config(struct qca8k_pri
if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge"))
priv->sgmii_rx_clk_falling_edge = true;
+ if (of_property_read_bool(port_dn, "qca,sgmii-enable-pll")) {
+ priv->sgmii_enable_pll = true;
+
+ if (priv->switch_id == QCA8K_ID_QCA8327) {
+ dev_err(priv->dev, "SGMII PLL should NOT be enabled for qca8327. Aborting enabling");
+ priv->sgmii_enable_pll = false;
+ }
+
+ if (priv->switch_revision < 2)
+ dev_warn(priv->dev, "SGMII PLL should NOT be enabled for qca8337 with revision 2 or more.");
+ }
+
break;
default:
continue;
@@ -1312,8 +1324,11 @@ qca8k_phylink_mac_config(struct dsa_swit
if (ret)
return;
- val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX |
- QCA8K_SGMII_EN_TX | QCA8K_SGMII_EN_SD;
+ val |= QCA8K_SGMII_EN_SD;
+
+ if (priv->sgmii_enable_pll)
+ val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX |
+ QCA8K_SGMII_EN_TX;
if (dsa_is_cpu_port(ds, port)) {
/* CPU port, we're talking to the CPU MAC, be a PHY */
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -266,6 +266,7 @@ struct qca8k_priv {
u8 switch_revision;
bool sgmii_rx_clk_falling_edge;
bool sgmii_tx_clk_falling_edge;
+ bool sgmii_enable_pll;
u8 rgmii_rx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
u8 rgmii_tx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
bool legacy_phy_port_mapping;

37
target/linux/generic/backport-5.10/797-v5.16-09-dt-bindings-net-dsa-qca8k-Document-qca-led-open-drai.patch Normal file
View File

@ -0,0 +1,37 @@
From 924087c5c3d41553700b0eb83ca2a53b91643dca Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Thu, 14 Oct 2021 00:39:14 +0200
Subject: dt-bindings: net: dsa: qca8k: Document qca,led-open-drain binding
Document new binding qca,ignore-power-on-sel used to ignore
power on strapping and use sw regs instead.
Document qca,led-open.drain to set led to open drain mode, the
qca,ignore-power-on-sel is mandatory with this enabled or an error will
be reported.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
Documentation/devicetree/bindings/net/dsa/qca8k.txt | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
@@ -13,6 +13,17 @@ Required properties:
Optional properties:
- reset-gpios: GPIO to be used to reset the whole device
+- qca,ignore-power-on-sel: Ignore power on pin strapping to configure led open
+ drain or eeprom presence. This is needed for broken
+ devices that have wrong configuration or when the oem
+ decided to not use pin strapping and fallback to sw
+ regs.
+- qca,led-open-drain: Set leds to open-drain mode. This requires the
+ qca,ignore-power-on-sel to be set or the driver will fail
+ to probe. This is needed if the oem doesn't use pin
+ strapping to set this mode and prefers to set it using sw
+ regs. The pin strapping related to led open drain mode is
+ the pin B68 for QCA832x and B49 for QCA833x
Subnodes:

92
target/linux/generic/backport-5.10/797-v5.16-10-net-dsa-qca8k-add-support-for-pws-config-reg.patch Normal file
View File

@ -0,0 +1,92 @@
From 362bb238d8bf1470424214a8a5968d9c6cce68fa Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Thu, 14 Oct 2021 00:39:15 +0200
Subject: net: dsa: qca8k: add support for pws config reg
Some qca8327 switch require to force the ignore of power on sel
strapping. Some switch require to set the led open drain mode in regs
instead of using strapping. While most of the device implements this
using the correct way using pin strapping, there are still some broken
device that require to be set using sw regs.
Introduce a new binding and support these special configuration.
As led open drain require to ignore pin strapping to work, the probe
fails with EINVAL error with incorrect configuration.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/dsa/qca8k.c | 39 +++++++++++++++++++++++++++++++++++++++
drivers/net/dsa/qca8k.h | 6 ++++++
2 files changed, 45 insertions(+)
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -932,6 +932,41 @@ static int qca8k_find_cpu_port(struct ds
}
static int
+qca8k_setup_of_pws_reg(struct qca8k_priv *priv)
+{
+ struct device_node *node = priv->dev->of_node;
+ u32 val = 0;
+ int ret;
+
+ /* QCA8327 require to set to the correct mode.
+ * His bigger brother QCA8328 have the 172 pin layout.
+ * Should be applied by default but we set this just to make sure.
+ */
+ if (priv->switch_id == QCA8K_ID_QCA8327) {
+ ret = qca8k_rmw(priv, QCA8K_REG_PWS, QCA8327_PWS_PACKAGE148_EN,
+ QCA8327_PWS_PACKAGE148_EN);
+ if (ret)
+ return ret;
+ }
+
+ if (of_property_read_bool(node, "qca,ignore-power-on-sel"))
+ val |= QCA8K_PWS_POWER_ON_SEL;
+
+ if (of_property_read_bool(node, "qca,led-open-drain")) {
+ if (!(val & QCA8K_PWS_POWER_ON_SEL)) {
+ dev_err(priv->dev, "qca,led-open-drain require qca,ignore-power-on-sel to be set.");
+ return -EINVAL;
+ }
+
+ val |= QCA8K_PWS_LED_OPEN_EN_CSR;
+ }
+
+ return qca8k_rmw(priv, QCA8K_REG_PWS,
+ QCA8K_PWS_LED_OPEN_EN_CSR | QCA8K_PWS_POWER_ON_SEL,
+ val);
+}
+
+static int
qca8k_parse_port_config(struct qca8k_priv *priv)
{
int port, cpu_port_index = 0, ret;
@@ -1053,6 +1088,10 @@ qca8k_setup(struct dsa_switch *ds)
if (ret)
return ret;
+ ret = qca8k_setup_of_pws_reg(priv);
+ if (ret)
+ return ret;
+
ret = qca8k_setup_mac_pwr_sel(priv);
if (ret)
return ret;
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -46,6 +46,12 @@
#define QCA8K_MAX_DELAY 3
#define QCA8K_PORT_PAD_SGMII_EN BIT(7)
#define QCA8K_REG_PWS 0x010
+#define QCA8K_PWS_POWER_ON_SEL BIT(31)
+/* This reg is only valid for QCA832x and toggle the package
+ * type from 176 pin (by default) to 148 pin used on QCA8327
+ */
+#define QCA8327_PWS_PACKAGE148_EN BIT(30)
+#define QCA8K_PWS_LED_OPEN_EN_CSR BIT(24)
#define QCA8K_PWS_SERDES_AEN_DIS BIT(7)
#define QCA8K_REG_MODULE_EN 0x030
#define QCA8K_MODULE_EN_MIB BIT(0)

32
target/linux/generic/backport-5.10/797-v5.16-11-dt-bindings-net-dsa-qca8k-document-support-for-qca83.patch Normal file
View File

@ -0,0 +1,32 @@
From ed7988d77fbfb79366b68f9e7fa60a6080da23d4 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Thu, 14 Oct 2021 00:39:16 +0200
Subject: dt-bindings: net: dsa: qca8k: document support for qca8328
QCA8328 is the bigger brother of qca8327. Document the new compatible
binding and add some information to understand the various switch
compatible.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
Documentation/devicetree/bindings/net/dsa/qca8k.txt | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
@@ -3,9 +3,10 @@
Required properties:
- compatible: should be one of:
- "qca,qca8327"
- "qca,qca8334"
- "qca,qca8337"
+ "qca,qca8328": referenced as AR8328(N)-AK1(A/B) QFN 176 pin package
+ "qca,qca8327": referenced as AR8327(N)-AL1A DR-QFN 148 pin package
+ "qca,qca8334": referenced as QCA8334-AL3C QFN 88 pin package
+ "qca,qca8337": referenced as QCA8337N-AL3(B/C) DR-QFN 148 pin package
- #size-cells: must be 0
- #address-cells: must be 1

78
target/linux/generic/backport-5.10/797-v5.16-12-net-dsa-qca8k-add-support-for-QCA8328.patch Normal file
View File

@ -0,0 +1,78 @@
From f477d1c8bdbef4f400718238e350f16f521d2a3e Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Thu, 14 Oct 2021 00:39:17 +0200
Subject: net: dsa: qca8k: add support for QCA8328
QCA8328 switch is the bigger brother of the qca8327. Same regs different
chip. Change the function to set the correct pin layout and introduce a
new match_data to differentiate the 2 switch as they have the same ID
and their internal PHY have the same ID.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/dsa/qca8k.c | 19 ++++++++++++++++---
drivers/net/dsa/qca8k.h | 1 +
2 files changed, 17 insertions(+), 3 deletions(-)
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -935,6 +935,7 @@ static int
qca8k_setup_of_pws_reg(struct qca8k_priv *priv)
{
struct device_node *node = priv->dev->of_node;
+ const struct qca8k_match_data *data;
u32 val = 0;
int ret;
@@ -943,8 +944,14 @@ qca8k_setup_of_pws_reg(struct qca8k_priv
* Should be applied by default but we set this just to make sure.
*/
if (priv->switch_id == QCA8K_ID_QCA8327) {
+ data = of_device_get_match_data(priv->dev);
+
+ /* Set the correct package of 148 pin for QCA8327 */
+ if (data->reduced_package)
+ val |= QCA8327_PWS_PACKAGE148_EN;
+
ret = qca8k_rmw(priv, QCA8K_REG_PWS, QCA8327_PWS_PACKAGE148_EN,
- QCA8327_PWS_PACKAGE148_EN);
+ val);
if (ret)
return ret;
}
@@ -2098,7 +2105,12 @@ static int qca8k_resume(struct device *d
static SIMPLE_DEV_PM_OPS(qca8k_pm_ops,
qca8k_suspend, qca8k_resume);
-static const struct qca8k_match_data qca832x = {
+static const struct qca8k_match_data qca8327 = {
+ .id = QCA8K_ID_QCA8327,
+ .reduced_package = true,
+};
+
+static const struct qca8k_match_data qca8328 = {
.id = QCA8K_ID_QCA8327,
};
@@ -2107,7 +2119,8 @@ static const struct qca8k_match_data qca
};
static const struct of_device_id qca8k_of_match[] = {
- { .compatible = "qca,qca8327", .data = &qca832x },
+ { .compatible = "qca,qca8327", .data = &qca8327 },
+ { .compatible = "qca,qca8328", .data = &qca8328 },
{ .compatible = "qca,qca8334", .data = &qca833x },
{ .compatible = "qca,qca8337", .data = &qca833x },
{ /* sentinel */ },
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -260,6 +260,7 @@ struct ar8xxx_port_status {
struct qca8k_match_data {
u8 id;
+ bool reduced_package;
};
enum {

159
target/linux/generic/backport-5.10/797-v5.16-13-net-dsa-qca8k-set-internal-delay-also-for-sgmii.patch Normal file
View File

@ -0,0 +1,159 @@
From cef08115846e581f80ff99abf7bf218da1840616 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Thu, 14 Oct 2021 00:39:18 +0200
Subject: net: dsa: qca8k: set internal delay also for sgmii
QCA original code report port instability and sa that SGMII also require
to set internal delay. Generalize the rgmii delay function and apply the
advised value if they are not defined in DT.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/dsa/qca8k.c | 88 +++++++++++++++++++++++++++++++++----------------
drivers/net/dsa/qca8k.h | 2 ++
2 files changed, 62 insertions(+), 28 deletions(-)
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1004,6 +1004,7 @@ qca8k_parse_port_config(struct qca8k_pri
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_SGMII:
delay = 0;
if (!of_property_read_u32(port_dn, "tx-internal-delay-ps", &delay))
@@ -1036,8 +1037,13 @@ qca8k_parse_port_config(struct qca8k_pri
priv->rgmii_rx_delay[cpu_port_index] = delay;
- break;
- case PHY_INTERFACE_MODE_SGMII:
+ /* Skip sgmii parsing for rgmii* mode */
+ if (mode == PHY_INTERFACE_MODE_RGMII ||
+ mode == PHY_INTERFACE_MODE_RGMII_ID ||
+ mode == PHY_INTERFACE_MODE_RGMII_TXID ||
+ mode == PHY_INTERFACE_MODE_RGMII_RXID)
+ break;
+
if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge"))
priv->sgmii_tx_clk_falling_edge = true;
@@ -1261,12 +1267,53 @@ qca8k_setup(struct dsa_switch *ds)
}
static void
+qca8k_mac_config_setup_internal_delay(struct qca8k_priv *priv, int cpu_port_index,
+ u32 reg)
+{
+ u32 delay, val = 0;
+ int ret;
+
+ /* Delay can be declared in 3 different way.
+ * Mode to rgmii and internal-delay standard binding defined
+ * rgmii-id or rgmii-tx/rx phy mode set.
+ * The parse logic set a delay different than 0 only when one
+ * of the 3 different way is used. In all other case delay is
+ * not enabled. With ID or TX/RXID delay is enabled and set
+ * to the default and recommended value.
+ */
+ if (priv->rgmii_tx_delay[cpu_port_index]) {
+ delay = priv->rgmii_tx_delay[cpu_port_index];
+
+ val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) |
+ QCA8K_PORT_PAD_RGMII_TX_DELAY_EN;
+ }
+
+ if (priv->rgmii_rx_delay[cpu_port_index]) {
+ delay = priv->rgmii_rx_delay[cpu_port_index];
+
+ val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) |
+ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN;
+ }
+
+ /* Set RGMII delay based on the selected values */
+ ret = qca8k_rmw(priv, reg,
+ QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK |
+ QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK |
+ QCA8K_PORT_PAD_RGMII_TX_DELAY_EN |
+ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN,
+ val);
+ if (ret)
+ dev_err(priv->dev, "Failed to set internal delay for CPU port%d",
+ cpu_port_index == QCA8K_CPU_PORT0 ? 0 : 6);
+}
+
+static void
qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
const struct phylink_link_state *state)
{
struct qca8k_priv *priv = ds->priv;
int cpu_port_index, ret;
- u32 reg, val, delay;
+ u32 reg, val;
switch (port) {
case 0: /* 1st CPU port */
@@ -1315,32 +1362,10 @@ qca8k_phylink_mac_config(struct dsa_swit
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_RGMII_RXID:
- val = QCA8K_PORT_PAD_RGMII_EN;
-
- /* Delay can be declared in 3 different way.
- * Mode to rgmii and internal-delay standard binding defined
- * rgmii-id or rgmii-tx/rx phy mode set.
- * The parse logic set a delay different than 0 only when one
- * of the 3 different way is used. In all other case delay is
- * not enabled. With ID or TX/RXID delay is enabled and set
- * to the default and recommended value.
- */
- if (priv->rgmii_tx_delay[cpu_port_index]) {
- delay = priv->rgmii_tx_delay[cpu_port_index];
-
- val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) |
- QCA8K_PORT_PAD_RGMII_TX_DELAY_EN;
- }
-
- if (priv->rgmii_rx_delay[cpu_port_index]) {
- delay = priv->rgmii_rx_delay[cpu_port_index];
-
- val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) |
- QCA8K_PORT_PAD_RGMII_RX_DELAY_EN;
- }
+ qca8k_write(priv, reg, QCA8K_PORT_PAD_RGMII_EN);
- /* Set RGMII delay based on the selected values */
- qca8k_write(priv, reg, val);
+ /* Configure rgmii delay */
+ qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
/* QCA8337 requires to set rgmii rx delay for all ports.
* This is enabled through PORT5_PAD_CTRL for all ports,
@@ -1411,6 +1436,13 @@ qca8k_phylink_mac_config(struct dsa_swit
QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE |
QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE,
val);
+
+ /* From original code is reported port instability as SGMII also
+ * require delay set. Apply advised values here or take them from DT.
+ */
+ if (state->interface == PHY_INTERFACE_MODE_SGMII)
+ qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
+
break;
default:
dev_err(ds->dev, "xMII mode %s not supported for port %d\n",
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -39,7 +39,9 @@
#define QCA8K_REG_PORT5_PAD_CTRL 0x008
#define QCA8K_REG_PORT6_PAD_CTRL 0x00c
#define QCA8K_PORT_PAD_RGMII_EN BIT(26)
+#define QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK GENMASK(23, 22)
#define QCA8K_PORT_PAD_RGMII_TX_DELAY(x) ((x) << 22)
+#define QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK GENMASK(21, 20)
#define QCA8K_PORT_PAD_RGMII_RX_DELAY(x) ((x) << 20)
#define QCA8K_PORT_PAD_RGMII_TX_DELAY_EN BIT(25)
#define QCA8K_PORT_PAD_RGMII_RX_DELAY_EN BIT(24)

124
target/linux/generic/backport-5.10/797-v5.16-14-net-dsa-qca8k-move-port-config-to-dedicated-struct.patch Normal file
View File

@ -0,0 +1,124 @@
From fd0bb28c547f7c8affb1691128cece38f5b626a1 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Thu, 14 Oct 2021 00:39:19 +0200
Subject: net: dsa: qca8k: move port config to dedicated struct
Move ports related config to dedicated struct to keep things organized.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/dsa/qca8k.c | 26 +++++++++++++-------------
drivers/net/dsa/qca8k.h | 10 +++++++---
2 files changed, 20 insertions(+), 16 deletions(-)
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1019,7 +1019,7 @@ qca8k_parse_port_config(struct qca8k_pri
delay = 3;
}
- priv->rgmii_tx_delay[cpu_port_index] = delay;
+ priv->ports_config.rgmii_tx_delay[cpu_port_index] = delay;
delay = 0;
@@ -1035,7 +1035,7 @@ qca8k_parse_port_config(struct qca8k_pri
delay = 3;
}
- priv->rgmii_rx_delay[cpu_port_index] = delay;
+ priv->ports_config.rgmii_rx_delay[cpu_port_index] = delay;
/* Skip sgmii parsing for rgmii* mode */
if (mode == PHY_INTERFACE_MODE_RGMII ||
@@ -1045,17 +1045,17 @@ qca8k_parse_port_config(struct qca8k_pri
break;
if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge"))
- priv->sgmii_tx_clk_falling_edge = true;
+ priv->ports_config.sgmii_tx_clk_falling_edge = true;
if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge"))
- priv->sgmii_rx_clk_falling_edge = true;
+ priv->ports_config.sgmii_rx_clk_falling_edge = true;
if (of_property_read_bool(port_dn, "qca,sgmii-enable-pll")) {
- priv->sgmii_enable_pll = true;
+ priv->ports_config.sgmii_enable_pll = true;
if (priv->switch_id == QCA8K_ID_QCA8327) {
dev_err(priv->dev, "SGMII PLL should NOT be enabled for qca8327. Aborting enabling");
- priv->sgmii_enable_pll = false;
+ priv->ports_config.sgmii_enable_pll = false;
}
if (priv->switch_revision < 2)
@@ -1281,15 +1281,15 @@ qca8k_mac_config_setup_internal_delay(st
* not enabled. With ID or TX/RXID delay is enabled and set
* to the default and recommended value.
*/
- if (priv->rgmii_tx_delay[cpu_port_index]) {
- delay = priv->rgmii_tx_delay[cpu_port_index];
+ if (priv->ports_config.rgmii_tx_delay[cpu_port_index]) {
+ delay = priv->ports_config.rgmii_tx_delay[cpu_port_index];
val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) |
QCA8K_PORT_PAD_RGMII_TX_DELAY_EN;
}
- if (priv->rgmii_rx_delay[cpu_port_index]) {
- delay = priv->rgmii_rx_delay[cpu_port_index];
+ if (priv->ports_config.rgmii_rx_delay[cpu_port_index]) {
+ delay = priv->ports_config.rgmii_rx_delay[cpu_port_index];
val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) |
QCA8K_PORT_PAD_RGMII_RX_DELAY_EN;
@@ -1397,7 +1397,7 @@ qca8k_phylink_mac_config(struct dsa_swit
val |= QCA8K_SGMII_EN_SD;
- if (priv->sgmii_enable_pll)
+ if (priv->ports_config.sgmii_enable_pll)
val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX |
QCA8K_SGMII_EN_TX;
@@ -1425,10 +1425,10 @@ qca8k_phylink_mac_config(struct dsa_swit
val = 0;
/* SGMII Clock phase configuration */
- if (priv->sgmii_rx_clk_falling_edge)
+ if (priv->ports_config.sgmii_rx_clk_falling_edge)
val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE;
- if (priv->sgmii_tx_clk_falling_edge)
+ if (priv->ports_config.sgmii_tx_clk_falling_edge)
val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE;
if (val)
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -270,15 +270,19 @@ enum {
QCA8K_CPU_PORT6,
};
-struct qca8k_priv {
- u8 switch_id;
- u8 switch_revision;
+struct qca8k_ports_config {
bool sgmii_rx_clk_falling_edge;
bool sgmii_tx_clk_falling_edge;
bool sgmii_enable_pll;
u8 rgmii_rx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
u8 rgmii_tx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
+};
+
+struct qca8k_priv {
+ u8 switch_id;
+ u8 switch_revision;
bool legacy_phy_port_mapping;
+ struct qca8k_ports_config ports_config;
struct regmap *regmap;
struct mii_bus *bus;
struct ar8xxx_port_status port_sts[QCA8K_NUM_PORTS];

26
target/linux/generic/backport-5.10/797-v5.16-15-dt-bindings-net-ipq8064-mdio-fix-warning-with-new-qc.patch Normal file
View File

@ -0,0 +1,26 @@
From e52073a8e3086046a098b8a7cbeb282ff0cdb424 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Thu, 14 Oct 2021 00:39:20 +0200
Subject: dt-bindings: net: ipq8064-mdio: fix warning with new qca8k switch
Fix warning now that we have qca8k switch Documentation using yaml.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
@@ -51,6 +51,9 @@ examples:
switch@10 {
compatible = "qca,qca8337";
reg = <0x10>;
- /* ... */
+
+ ports {
+ /* ... */
+ };
};
};

631
target/linux/generic/backport-5.10/797-v5.16-16-dt-bindings-net-dsa-qca8k-convert-to-YAML-schema.patch Normal file
View File

@ -0,0 +1,631 @@
From d291fbb8245d5ba04979fed85575860a5cea7196 Mon Sep 17 00:00:00 2001
From: Matthew Hagan <mnhagan88@gmail.com>
Date: Thu, 14 Oct 2021 00:39:21 +0200
Subject: dt-bindings: net: dsa: qca8k: convert to YAML schema
Convert the qca8k bindings to YAML format.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Co-developed-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
.../devicetree/bindings/net/dsa/qca8k.txt | 245 --------------
.../devicetree/bindings/net/dsa/qca8k.yaml | 362 +++++++++++++++++++++
2 files changed, 362 insertions(+), 245 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/dsa/qca8k.txt
create mode 100644 Documentation/devicetree/bindings/net/dsa/qca8k.yaml
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
+++ /dev/null
@@ -1,245 +0,0 @@
-* Qualcomm Atheros QCA8xxx switch family
-
-Required properties:
-
-- compatible: should be one of:
- "qca,qca8328": referenced as AR8328(N)-AK1(A/B) QFN 176 pin package
- "qca,qca8327": referenced as AR8327(N)-AL1A DR-QFN 148 pin package
- "qca,qca8334": referenced as QCA8334-AL3C QFN 88 pin package
- "qca,qca8337": referenced as QCA8337N-AL3(B/C) DR-QFN 148 pin package
-
-- #size-cells: must be 0
-- #address-cells: must be 1
-
-Optional properties:
-
-- reset-gpios: GPIO to be used to reset the whole device
-- qca,ignore-power-on-sel: Ignore power on pin strapping to configure led open
- drain or eeprom presence. This is needed for broken
- devices that have wrong configuration or when the oem
- decided to not use pin strapping and fallback to sw
- regs.
-- qca,led-open-drain: Set leds to open-drain mode. This requires the
- qca,ignore-power-on-sel to be set or the driver will fail
- to probe. This is needed if the oem doesn't use pin
- strapping to set this mode and prefers to set it using sw
- regs. The pin strapping related to led open drain mode is
- the pin B68 for QCA832x and B49 for QCA833x
-
-Subnodes:
-
-The integrated switch subnode should be specified according to the binding
-described in dsa/dsa.txt. If the QCA8K switch is connect to a SoC's external
-mdio-bus each subnode describing a port needs to have a valid phandle
-referencing the internal PHY it is connected to. This is because there's no
-N:N mapping of port and PHY id.
-To declare the internal mdio-bus configuration, declare a mdio node in the
-switch node and declare the phandle for the port referencing the internal
-PHY is connected to. In this config a internal mdio-bus is registered and
-the mdio MASTER is used as communication.
-
-Don't use mixed external and internal mdio-bus configurations, as this is
-not supported by the hardware.
-
-This switch support 2 CPU port. Normally and advised configuration is with
-CPU port set to port 0. It is also possible to set the CPU port to port 6
-if the device requires it. The driver will configure the switch to the defined
-port. With both CPU port declared the first CPU port is selected as primary
-and the secondary CPU ignored.
-
-A CPU port node has the following optional node:
-
-- fixed-link : Fixed-link subnode describing a link to a non-MDIO
- managed entity. See
- Documentation/devicetree/bindings/net/fixed-link.txt
- for details.
-- qca,sgmii-rxclk-falling-edge: Set the receive clock phase to falling edge.
- Mostly used in qca8327 with CPU port 0 set to
- sgmii.
-- qca,sgmii-txclk-falling-edge: Set the transmit clock phase to falling edge.
-- qca,sgmii-enable-pll : For SGMII CPU port, explicitly enable PLL, TX and RX
- chain along with Signal Detection.
- This should NOT be enabled for qca8327. If enabled with
- qca8327 the sgmii port won't correctly init and an err
- is printed.
- This can be required for qca8337 switch with revision 2.
- A warning is displayed when used with revision greater
- 2.
- With CPU port set to sgmii and qca8337 it is advised
- to set this unless a communication problem is observed.
-
-For QCA8K the 'fixed-link' sub-node supports only the following properties:
-
-- 'speed' (integer, mandatory), to indicate the link speed. Accepted
- values are 10, 100 and 1000
-- 'full-duplex' (boolean, optional), to indicate that full duplex is
- used. When absent, half duplex is assumed.
-
-Examples:
-
-for the external mdio-bus configuration:
-
- &mdio0 {
- phy_port1: phy@0 {
- reg = <0>;
- };
-
- phy_port2: phy@1 {
- reg = <1>;
- };
-
- phy_port3: phy@2 {
- reg = <2>;
- };
-
- phy_port4: phy@3 {
- reg = <3>;
- };
-
- phy_port5: phy@4 {
- reg = <4>;
- };
-
- switch@10 {
- compatible = "qca,qca8337";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
- reg = <0x10>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- label = "cpu";
- ethernet = <&gmac1>;
- phy-mode = "rgmii";
- fixed-link {
- speed = 1000;
- full-duplex;
- };
- };
-
- port@1 {
- reg = <1>;
- label = "lan1";
- phy-handle = <&phy_port1>;
- };
-
- port@2 {
- reg = <2>;
- label = "lan2";
- phy-handle = <&phy_port2>;
- };
-
- port@3 {
- reg = <3>;
- label = "lan3";
- phy-handle = <&phy_port3>;
- };
-
- port@4 {
- reg = <4>;
- label = "lan4";
- phy-handle = <&phy_port4>;
- };
-
- port@5 {
- reg = <5>;
- label = "wan";
- phy-handle = <&phy_port5>;
- };
- };
- };
- };
-
-for the internal master mdio-bus configuration:
-
- &mdio0 {
- switch@10 {
- compatible = "qca,qca8337";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
- reg = <0x10>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- label = "cpu";
- ethernet = <&gmac1>;
- phy-mode = "rgmii";
- fixed-link {
- speed = 1000;
- full-duplex;
- };
- };
-
- port@1 {
- reg = <1>;
- label = "lan1";
- phy-mode = "internal";
- phy-handle = <&phy_port1>;
- };
-
- port@2 {
- reg = <2>;
- label = "lan2";
- phy-mode = "internal";
- phy-handle = <&phy_port2>;
- };
-
- port@3 {
- reg = <3>;
- label = "lan3";
- phy-mode = "internal";
- phy-handle = <&phy_port3>;
- };
-
- port@4 {
- reg = <4>;
- label = "lan4";
- phy-mode = "internal";
- phy-handle = <&phy_port4>;
- };
-
- port@5 {
- reg = <5>;
- label = "wan";
- phy-mode = "internal";
- phy-handle = <&phy_port5>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- phy_port1: phy@0 {
- reg = <0>;
- };
-
- phy_port2: phy@1 {
- reg = <1>;
- };
-
- phy_port3: phy@2 {
- reg = <2>;
- };
-
- phy_port4: phy@3 {
- reg = <3>;
- };
-
- phy_port5: phy@4 {
- reg = <4>;
- };
- };
- };
- };
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
@@ -0,0 +1,362 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/qca8k.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros QCA83xx switch family
+
+maintainers:
+ - John Crispin <john@phrozen.org>
+
+description:
+ If the QCA8K switch is connect to an SoC's external mdio-bus, each subnode
+ describing a port needs to have a valid phandle referencing the internal PHY
+ it is connected to. This is because there is no N:N mapping of port and PHY
+ ID. To declare the internal mdio-bus configuration, declare an MDIO node in
+ the switch node and declare the phandle for the port, referencing the internal
+ PHY it is connected to. In this config, an internal mdio-bus is registered and
+ the MDIO master is used for communication. Mixed external and internal
+ mdio-bus configurations are not supported by the hardware.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - qca,qca8327
+ - qca,qca8328
+ - qca,qca8334
+ - qca,qca8337
+ description: |
+ qca,qca8328: referenced as AR8328(N)-AK1(A/B) QFN 176 pin package
+ qca,qca8327: referenced as AR8327(N)-AL1A DR-QFN 148 pin package
+ qca,qca8334: referenced as QCA8334-AL3C QFN 88 pin package
+ qca,qca8337: referenced as QCA8337N-AL3(B/C) DR-QFN 148 pin package
+
+ reg:
+ maxItems: 1
+
+ reset-gpios:
+ description:
+ GPIO to be used to reset the whole device
+ maxItems: 1
+
+ qca,ignore-power-on-sel:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Ignore power-on pin strapping to configure LED open-drain or EEPROM
+ presence. This is needed for devices with incorrect configuration or when
+ the OEM has decided not to use pin strapping and falls back to SW regs.
+
+ qca,led-open-drain:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Set LEDs to open-drain mode. This requires the qca,ignore-power-on-sel to
+ be set, otherwise the driver will fail at probe. This is required if the
+ OEM does not use pin strapping to set this mode and prefers to set it
+ using SW regs. The pin strappings related to LED open-drain mode are
+ B68 on the QCA832x and B49 on the QCA833x.
+
+ mdio:
+ type: object
+ description: Qca8k switch have an internal mdio to access switch port.
+ If this is not present, the legacy mapping is used and the
+ internal mdio access is used.
+ With the legacy mapping the reg corresponding to the internal
+ mdio is the switch reg with an offset of -1.
+
+ properties:
+ '#address-cells':
+ const: 1
+ '#size-cells':
+ const: 0
+
+ patternProperties:
+ "^(ethernet-)?phy@[0-4]$":
+ type: object
+
+ allOf:
+ - $ref: "http://devicetree.org/schemas/net/mdio.yaml#"
+
+ properties:
+ reg:
+ maxItems: 1
+
+ required:
+ - reg
+
+patternProperties:
+ "^(ethernet-)?ports$":
+ type: object
+ properties:
+ '#address-cells':
+ const: 1
+ '#size-cells':
+ const: 0
+
+ patternProperties:
+ "^(ethernet-)?port@[0-6]$":
+ type: object
+ description: Ethernet switch ports
+
+ properties:
+ reg:
+ description: Port number
+
+ label:
+ description:
+ Describes the label associated with this port, which will become
+ the netdev name
+ $ref: /schemas/types.yaml#/definitions/string
+
+ link:
+ description:
+ Should be a list of phandles to other switch's DSA port. This
+ port is used as the outgoing port towards the phandle ports. The
+ full routing information must be given, not just the one hop
+ routes to neighbouring switches
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+
+ ethernet:
+ description:
+ Should be a phandle to a valid Ethernet device node. This host
+ device is what the switch port is connected to
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ phy-handle: true
+
+ phy-mode: true
+
+ fixed-link: true
+
+ mac-address: true
+
+ sfp: true
+
+ qca,sgmii-rxclk-falling-edge:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Set the receive clock phase to falling edge. Mostly commonly used on
+ the QCA8327 with CPU port 0 set to SGMII.
+
+ qca,sgmii-txclk-falling-edge:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Set the transmit clock phase to falling edge.
+
+ qca,sgmii-enable-pll:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ For SGMII CPU port, explicitly enable PLL, TX and RX chain along with
+ Signal Detection. On the QCA8327 this should not be enabled, otherwise
+ the SGMII port will not initialize. When used on the QCA8337, revision 3
+ or greater, a warning will be displayed. When the CPU port is set to
+ SGMII on the QCA8337, it is advised to set this unless a communication
+ issue is observed.
+
+ required:
+ - reg
+
+ additionalProperties: false
+
+oneOf:
+ - required:
+ - ports
+ - required:
+ - ethernet-ports
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: true
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ external_phy_port1: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ external_phy_port2: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ external_phy_port3: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ external_phy_port4: ethernet-phy@3 {
+ reg = <3>;
+ };
+
+ external_phy_port5: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ switch@10 {
+ compatible = "qca,qca8337";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+ reg = <0x10>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "cpu";
+ ethernet = <&gmac1>;
+ phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ phy-handle = <&external_phy_port1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ phy-handle = <&external_phy_port2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ phy-handle = <&external_phy_port3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan4";
+ phy-handle = <&external_phy_port4>;
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "wan";
+ phy-handle = <&external_phy_port5>;
+ };
+ };
+ };
+ };
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch@10 {
+ compatible = "qca,qca8337";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+ reg = <0x10>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "cpu";
+ ethernet = <&gmac1>;
+ phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ phy-mode = "internal";
+ phy-handle = <&internal_phy_port1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ phy-mode = "internal";
+ phy-handle = <&internal_phy_port2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ phy-mode = "internal";
+ phy-handle = <&internal_phy_port3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan4";
+ phy-mode = "internal";
+ phy-handle = <&internal_phy_port4>;
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "wan";
+ phy-mode = "internal";
+ phy-handle = <&internal_phy_port5>;
+ };
+
+ port@6 {
+ reg = <0>;
+ label = "cpu";
+ ethernet = <&gmac1>;
+ phy-mode = "sgmii";
+
+ qca,sgmii-rxclk-falling-edge;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ internal_phy_port1: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ internal_phy_port2: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ internal_phy_port3: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ internal_phy_port4: ethernet-phy@3 {
+ reg = <3>;
+ };
+
+ internal_phy_port5: ethernet-phy@4 {
+ reg = <4>;
+ };
+ };
+ };
+ };