ramips: add support for Wavlink WL-WN578A2
This commit adds support for the Wavlink WL-WN578A2 dual-band wall-plug wireless router. This device is also sold under the name SilverCrest SWV 733 A2. Device Specifications: - CPU: MediaTek MT7628AN (580MHz) - Flash: 8MB - RAM: 64MB - Bootloader: U-Boot - Ethernet: 2x 10/100 Mbps - 2.4 GHz: 802.11b/g/n SoC - 5 GHz: 802.11a/n/ac MT7610E - Antennas: internal - 4 green LEDs: WPS/Power, LAN, WAN, wifi-low, wifi-med, wifi-high - Buttons: Reset, WPS - Sliding mode switch: AP, repeater, client - Small sliding power switch Flashing instructions: U-Boot launches TFTP client if WPS button is pressed during power-on. Configure as follows: - Server IP: 192.168.10.100 - Filename (rename sysupgrade file to this): firmware.bin Flashing should not take more than a minute, device will reboot automatically. Signed-off-by: Thomas Aldrian <dev.aldrian@gmail.com>
This commit is contained in:
Thomas Aldrian
parent
53b9cc442f
commit
f755d81999
|
|
@ -0,0 +1,166 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7628an.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
compatible = "wavlink,wl-wn578a2", "mediatek,mt7628an-soc";
|
||||
model = "Wavlink WL-WN578A2";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_wps;
|
||||
led-failsafe = &led_wps;
|
||||
led-running = &led_wps;
|
||||
led-upgrade = &led_wps;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
|
||||
ap {
|
||||
label = "ap";
|
||||
gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
|
||||
repeater {
|
||||
label = "repeater";
|
||||
gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_1>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
wifi-high {
|
||||
label = "green:wifi-high";
|
||||
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wifi-med {
|
||||
label = "green:wifi-med";
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wifi-low {
|
||||
label = "green:wifi-low";
|
||||
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan {
|
||||
label = "green:lan";
|
||||
gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "green:wan";
|
||||
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_wps: wps {
|
||||
label = "green:wps";
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "i2c", "wdt", "wled_an", "p0led_an", "p1led_an",
|
||||
"p2led_an", "p3led_an", "p4led_an", "refclk", "gpio";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi@0,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0x7b0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0x28>;
|
||||
};
|
||||
|
||||
&esw {
|
||||
mediatek,portmap = <0x2f>;
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&ehci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&ohci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -734,6 +734,16 @@ define Device/wavlink_wl-wn577a2
|
|||
endef
|
||||
TARGET_DEVICES += wavlink_wl-wn577a2
|
||||
|
||||
define Device/wavlink_wl-wn578a2
|
||||
IMAGE_SIZE := 7872k
|
||||
DEVICE_VENDOR := Wavlink
|
||||
DEVICE_MODEL := WL-WN578A2
|
||||
DEVICE_ALT0_VENDOR := SilverCrest
|
||||
DEVICE_ALT0_MODEL := SWV 733 A2
|
||||
DEVICE_PACKAGES := kmod-mt76x0e
|
||||
endef
|
||||
TARGET_DEVICES += wavlink_wl-wn578a2
|
||||
|
||||
define Device/widora_neo-16m
|
||||
IMAGE_SIZE := 16064k
|
||||
DEVICE_VENDOR := Widora
|
||||
|
|
|
|||
|
|
@ -129,7 +129,8 @@ wavlink,wl-wn575a3)
|
|||
ucidef_set_led_rssi "wifi-med" "wifi-med" "green:wifi-med" "wlan1" "50" "84"
|
||||
ucidef_set_led_rssi "wifi-high" "wifi-high" "green:wifi-high" "wlan1" "85" "100"
|
||||
;;
|
||||
wavlink,wl-wn577a2)
|
||||
wavlink,wl-wn577a2|\
|
||||
wavlink,wl-wn578a2)
|
||||
ucidef_set_led_switch "lan" "lan" "green:lan" "switch0" "0x8"
|
||||
ucidef_set_led_switch "wan" "wan" "green:wan" "switch0" "0x10"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -46,7 +46,8 @@ ramips_setup_interfaces()
|
|||
;;
|
||||
buffalo,wcr-1166ds|\
|
||||
elecom,wrc-1167fs|\
|
||||
wavlink,wl-wn577a2)
|
||||
wavlink,wl-wn577a2|\
|
||||
wavlink,wl-wn578a2)
|
||||
ucidef_add_switch "switch0" \
|
||||
"3:lan" "4:wan" "6@eth0"
|
||||
;;
|
||||
|
|
@ -168,7 +169,8 @@ ramips_setup_macs()
|
|||
;;
|
||||
cudy,wr1000|\
|
||||
hilink,hlk-7688a|\
|
||||
wavlink,wl-wn577a2)
|
||||
wavlink,wl-wn577a2|\
|
||||
wavlink,wl-wn578a2)
|
||||
wan_mac=$(mtd_get_mac_binary factory 0x2e)
|
||||
label_mac=$(mtd_get_mac_binary factory 0x4)
|
||||
;;
|
||||
|
|
|
|||
Loading…
Reference in New Issue