mirror
/
openwrt
mirror of https://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Releases Activity

kernel: bump 5.4 to 5.4.142 

Removed upstreamed:
  hack-5.4/991-platform-x86-pcengines-apuv2-revert-simswitch.patch

All other patches automatically rebased.

Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
This commit is contained in:
John Audia 2021-08-18 08:06:08 -04:00 committed by Hauke Mehrtens
parent 96369a68e7
commit f25cebc43c
13 changed files with 57 additions and 113 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
include/kernel-version.mk
View File

@ -6,10 +6,10 @@ ifdef CONFIG_TESTING_KERNEL
KERNEL_PATCHVER:=$(KERNEL_TESTING_PATCHVER)
endif
LINUX_VERSION-5.4 = .141
LINUX_VERSION-5.4 = .142
LINUX_VERSION-5.10 = .60
LINUX_KERNEL_HASH-5.4.141 = 10636d360cc5ba3857f8e91dfb0a4efcdb1406675e981fa9433748b097138c28
LINUX_KERNEL_HASH-5.4.142 = 99785728968564ba27c7e552d024b560072dcbc885540912eabb5c021e231451
LINUX_KERNEL_HASH-5.10.60 = 696ff7753f6c7c5123dbcb0a22d693cb358c760c61a76649531b6a207155f78d
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))

2
target/linux/bcm27xx/patches-5.4/950-0445-dma-mapping-treat-dev-bus_dma_mask-as-a-DMA-limit.patch
View File

@ -249,7 +249,7 @@ Signed-off-by: Christoph Hellwig <hch@lst.de>
* @dma_pfn_offset: offset of DMA memory range relatively of RAM
* @dma_parms: A low level driver may set these to teach IOMMU code about
* segment limitations.
@@ -1270,7 +1270,7 @@ struct device {
@@ -1271,7 +1271,7 @@ struct device {
not all hardware supports
64 bit addresses for consistent
allocations such descriptors. */

4
target/linux/generic/backport-5.4/745-v5.7-net-dsa-mt7530-add-support-for-port-mirroring.patch
View File

@ -17,7 +17,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1145,6 +1145,64 @@ mt7530_port_vlan_del(struct dsa_switch *
@@ -1146,6 +1146,64 @@ mt7530_port_vlan_del(struct dsa_switch *
return 0;
}
@ -82,7 +82,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
static enum dsa_tag_protocol
mtk_get_tag_protocol(struct dsa_switch *ds, int port)
{
@@ -1522,6 +1580,8 @@ static const struct dsa_switch_ops mt753
@@ -1523,6 +1581,8 @@ static const struct dsa_switch_ops mt753
.port_vlan_prepare = mt7530_port_vlan_prepare,
.port_vlan_add = mt7530_port_vlan_add,
.port_vlan_del = mt7530_port_vlan_del,

6
target/linux/generic/backport-5.4/753-v5.8-net-dsa-mt7530-fix-VLAN-setup.patch
View File

@ -15,7 +15,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1085,12 +1085,6 @@ mt7530_port_vlan_add(struct dsa_switch *
@@ -1086,12 +1086,6 @@ mt7530_port_vlan_add(struct dsa_switch *
struct mt7530_priv *priv = ds->priv;
u16 vid;
@ -28,7 +28,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
mutex_lock(&priv->reg_mutex);
for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
@@ -1116,12 +1110,6 @@ mt7530_port_vlan_del(struct dsa_switch *
@@ -1117,12 +1111,6 @@ mt7530_port_vlan_del(struct dsa_switch *
struct mt7530_priv *priv = ds->priv;
u16 vid, pvid;
@ -41,7 +41,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
mutex_lock(&priv->reg_mutex);
pvid = priv->ports[port].pvid;
@@ -1234,6 +1222,7 @@ mt7530_setup(struct dsa_switch *ds)
@@ -1235,6 +1223,7 @@ mt7530_setup(struct dsa_switch *ds)
* as two netdev instances.
*/
dn = ds->ports[MT7530_CPU_PORT].master->dev.of_node->parent;

2
target/linux/generic/backport-5.4/780-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch
View File

@ -21,7 +21,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -427,34 +427,32 @@ mt7530_pad_clk_setup(struct dsa_switch *
@@ -428,34 +428,32 @@ mt7530_pad_clk_setup(struct dsa_switch *
TD_DM_DRVP(8) | TD_DM_DRVN(8));
/* Setup core clock for MT7530 */

2
target/linux/generic/hack-5.4/221-module_exports.patch
View File

@ -56,7 +56,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
} \
\
/* __*init sections */ \
@@ -904,6 +914,8 @@
@@ -905,6 +915,8 @@
EXIT_TEXT \
EXIT_DATA \
EXIT_CALL \

56
target/linux/generic/hack-5.4/991-platform-x86-pcengines-apuv2-revert-simswitch.patch
View File

@ -1,56 +0,0 @@
From 8c9254d41881c81bea610193c6ac59c8cb8b79fe Mon Sep 17 00:00:00 2001
From: Florian Eckert <fe@dev.tdt.de>
Date: Fri, 27 Mar 2020 16:11:55 +0100
Subject: [PATCH] Revert "platform/x86: pcengines-apuv2: wire up simswitch gpio
as led"
This reverts commit 5037d4ddda31c2dbbb018109655f61054b1756dc.
Commit message from linux:
The APU3+ boards have two SIM sockets, while only one of them
can be routed to the mpcie slots at a time. Selection is done
via simswap gpio.
We currently don't have a fitting subsystem for those cases yet,
so just wire it up to a LED for the time being. While this isn't
really semantically correct, it's a good compromise.
Explanation why this does not work:
This change connects the simswap to the LED subsystem of the kernel.
From my point of view, it's nonsense. If we do it this way, then this
can be switched relatively easily via the LED subsystem (trigger:
none/default-on) and that is dangerous! If this is used, it would be
unfavorable, since there is also another trigger (trigger: heartbeat/netdev).
This LED also appears in the LuCI and can therefore be switched by the user.
Therefore, this simswap GPIO should remain in the GPIO
subsystem and be switched via it and not be connected to the LED
subsystem. To avoid the problems mentioned above. The LED subsystem is
not made for this and it is not a good compromise, but rather dangerous.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
---
drivers/platform/x86/pcengines-apuv2.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
--- a/drivers/platform/x86/pcengines-apuv2.c
+++ b/drivers/platform/x86/pcengines-apuv2.c
@@ -77,8 +77,7 @@ static const struct amd_fch_gpio_pdata b
static const struct gpio_led apu2_leds[] = {
{ .name = "apu:green:1" },
{ .name = "apu:green:2" },
- { .name = "apu:green:3" },
- { .name = "apu:simswap" },
+ { .name = "apu:green:3" }
};
static const struct gpio_led_platform_data apu2_leds_pdata = {
@@ -95,8 +94,6 @@ static struct gpiod_lookup_table gpios_l
NULL, 1, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX(AMD_FCH_GPIO_DRIVER_NAME, APU2_GPIO_LINE_LED3,
NULL, 2, GPIO_ACTIVE_LOW),
- GPIO_LOOKUP_IDX(AMD_FCH_GPIO_DRIVER_NAME, APU2_GPIO_LINE_SIMSWAP,
- NULL, 3, GPIO_ACTIVE_LOW),
}
};

6
target/linux/generic/pending-5.4/761-net-dsa-mt7530-Support-EEE-features.patch
View File

@ -9,7 +9,7 @@ Content-Transfer-Encoding: 8bit
Signed-off-by: René van Dorst <opensource@vdorst.com>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1409,9 +1409,13 @@ static void mt7530_phylink_mac_config(st
@@ -1410,9 +1410,13 @@ static void mt7530_phylink_mac_config(st
switch (state->speed) {
case SPEED_1000:
mcr_new |= PMCR_FORCE_SPEED_1000;
@ -23,7 +23,7 @@ Signed-off-by: René van Dorst <opensource@vdorst.com>
break;
}
if (state->duplex == DUPLEX_FULL) {
@@ -1547,6 +1551,54 @@ mt7530_phylink_mac_link_state(struct dsa
@@ -1548,6 +1552,54 @@ mt7530_phylink_mac_link_state(struct dsa
return 1;
}
@ -78,7 +78,7 @@ Signed-off-by: René van Dorst <opensource@vdorst.com>
static const struct dsa_switch_ops mt7530_switch_ops = {
.get_tag_protocol = mtk_get_tag_protocol,
.setup = mt7530_setup,
@@ -1574,6 +1626,8 @@ static const struct dsa_switch_ops mt753
@@ -1575,6 +1627,8 @@ static const struct dsa_switch_ops mt753
.phylink_mac_config = mt7530_phylink_mac_config,
.phylink_mac_link_down = mt7530_phylink_mac_link_down,
.phylink_mac_link_up = mt7530_phylink_mac_link_up,

4
target/linux/mediatek/patches-5.4/0601-net-dsa-propagate-resolved-link-config-via-mac_link_.patch
View File

@ -51,7 +51,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
struct ethtool_eee *p = &priv->dev->ports[port].eee;
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -1657,7 +1657,9 @@ static void gswip_phylink_mac_link_down(
@@ -1663,7 +1663,9 @@ static void gswip_phylink_mac_link_down(
static void gswip_phylink_mac_link_up(struct dsa_switch *ds, int port,
unsigned int mode,
phy_interface_t interface,
@ -64,7 +64,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1442,7 +1442,9 @@ static void mt7530_phylink_mac_link_down
@@ -1443,7 +1443,9 @@ static void mt7530_phylink_mac_link_down
static void mt7530_phylink_mac_link_up(struct dsa_switch *ds, int port,
unsigned int mode,
phy_interface_t interface,

14
target/linux/mediatek/patches-5.4/0602-net-dsa-mt7530-use-resolved-link-config-in-mac_link_.patch
View File

@ -15,7 +15,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -488,17 +488,6 @@ mt7530_mib_reset(struct dsa_switch *ds)
@@ -489,17 +489,6 @@ mt7530_mib_reset(struct dsa_switch *ds)
mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE);
}
@ -33,7 +33,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
static int mt7530_phy_read(struct dsa_switch *ds, int port, int regnum)
{
struct mt7530_priv *priv = ds->priv;
@@ -672,7 +661,7 @@ mt7530_port_enable(struct dsa_switch *ds
@@ -673,7 +662,7 @@ mt7530_port_enable(struct dsa_switch *ds
priv->ports[port].enable = true;
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
priv->ports[port].pm);
@ -42,7 +42,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
mutex_unlock(&priv->reg_mutex);
@@ -695,7 +684,7 @@ mt7530_port_disable(struct dsa_switch *d
@@ -696,7 +685,7 @@ mt7530_port_disable(struct dsa_switch *d
priv->ports[port].enable = false;
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
PCR_MATRIX_CLR);
@ -51,7 +51,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
mutex_unlock(&priv->reg_mutex);
}
@@ -1397,8 +1386,7 @@ static void mt7530_phylink_mac_config(st
@@ -1398,8 +1387,7 @@ static void mt7530_phylink_mac_config(st
mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port));
mcr_new = mcr_cur;
@ -61,7 +61,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN |
PMCR_BACKPR_EN | PMCR_FORCE_MODE;
@@ -1406,26 +1394,6 @@ static void mt7530_phylink_mac_config(st
@@ -1407,26 +1395,6 @@ static void mt7530_phylink_mac_config(st
if (port == 5 && dsa_is_user_port(ds, 5))
mcr_new |= PMCR_EXT_PHY;
@ -88,7 +88,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
if (mcr_new != mcr_cur)
mt7530_write(priv, MT7530_PMCR_P(port), mcr_new);
}
@@ -1436,7 +1404,7 @@ static void mt7530_phylink_mac_link_down
@@ -1437,7 +1405,7 @@ static void mt7530_phylink_mac_link_down
{
struct mt7530_priv *priv = ds->priv;
@ -97,7 +97,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
}
static void mt7530_phylink_mac_link_up(struct dsa_switch *ds, int port,
@@ -1447,8 +1415,31 @@ static void mt7530_phylink_mac_link_up(s
@@ -1448,8 +1416,31 @@ static void mt7530_phylink_mac_link_up(s
bool tx_pause, bool rx_pause)
{
struct mt7530_priv *priv = ds->priv;

18
target/linux/mediatek/patches-5.4/0603-net-dsa-mt7530-Extend-device-data-ready-for-adding-a.patch
View File

@ -17,7 +17,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -372,8 +372,9 @@ mt7530_fdb_write(struct mt7530_priv *pri
@@ -373,8 +373,9 @@ mt7530_fdb_write(struct mt7530_priv *pri
mt7530_write(priv, MT7530_ATA1 + (i * 4), reg[i]);
}
@ -28,7 +28,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
{
struct mt7530_priv *priv = ds->priv;
u32 ncpo1, ssc_delta, trgint, i, xtal;
@@ -387,7 +388,7 @@ mt7530_pad_clk_setup(struct dsa_switch *
@@ -388,7 +389,7 @@ mt7530_pad_clk_setup(struct dsa_switch *
return -EINVAL;
}
@ -37,7 +37,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
case PHY_INTERFACE_MODE_RGMII:
trgint = 0;
/* PLL frequency: 125MHz */
@@ -409,7 +410,8 @@ mt7530_pad_clk_setup(struct dsa_switch *
@@ -410,7 +411,8 @@ mt7530_pad_clk_setup(struct dsa_switch *
}
break;
default:
@ -47,7 +47,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
return -EINVAL;
}
@@ -1334,12 +1336,11 @@ mt7530_setup(struct dsa_switch *ds)
@@ -1335,12 +1337,11 @@ mt7530_setup(struct dsa_switch *ds)
return 0;
}
@ -63,7 +63,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
switch (port) {
case 0: /* Internal phy */
@@ -1348,33 +1349,114 @@ static void mt7530_phylink_mac_config(st
@@ -1349,33 +1350,114 @@ static void mt7530_phylink_mac_config(st
case 3:
case 4:
if (state->interface != PHY_INTERFACE_MODE_GMII)
@ -189,7 +189,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
return;
}
@@ -1442,61 +1524,44 @@ static void mt7530_phylink_mac_link_up(s
@@ -1443,61 +1525,44 @@ static void mt7530_phylink_mac_link_up(s
mt7530_set(priv, MT7530_PMCR_P(port), mcr);
}
@ -274,7 +274,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
phylink_set(mask, Pause);
phylink_set(mask, Asym_Pause);
@@ -1592,12 +1657,45 @@ static int mt7530_set_mac_eee(struct dsa
@@ -1593,12 +1658,45 @@ static int mt7530_set_mac_eee(struct dsa
return 0;
}
@ -323,7 +323,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
.get_ethtool_stats = mt7530_get_ethtool_stats,
.get_sset_count = mt7530_get_sset_count,
.port_enable = mt7530_port_enable,
@@ -1614,18 +1712,43 @@ static const struct dsa_switch_ops mt753
@@ -1615,18 +1713,43 @@ static const struct dsa_switch_ops mt753
.port_vlan_del = mt7530_port_vlan_del,
.port_mirror_add = mt7530_port_mirror_add,
.port_mirror_del = mt7530_port_mirror_del,
@ -372,7 +372,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, mt7530_of_match);
@@ -1663,8 +1786,21 @@ mt7530_probe(struct mdio_device *mdiodev
@@ -1664,8 +1787,21 @@ mt7530_probe(struct mdio_device *mdiodev
/* Get the hardware identifier from the devicetree node.
* We will need it for some of the clock and regulator setup.
*/

50
target/linux/mediatek/patches-5.4/0604-net-dsa-mt7530-Add-the-support-of-MT7531-switch.patch
View File

@ -28,7 +28,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -234,6 +234,12 @@ mt7530_write(struct mt7530_priv *priv, u
@@ -235,6 +235,12 @@ mt7530_write(struct mt7530_priv *priv, u
}
static u32
@ -41,7 +41,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
_mt7530_read(struct mt7530_dummy_poll *p)
{
struct mii_bus *bus = p->priv->bus;
@@ -481,6 +487,108 @@ mt7530_pad_clk_setup(struct dsa_switch *
@@ -482,6 +488,108 @@ mt7530_pad_clk_setup(struct dsa_switch *
return 0;
}
@ -150,7 +150,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
static void
mt7530_mib_reset(struct dsa_switch *ds)
{
@@ -505,6 +613,217 @@ static int mt7530_phy_write(struct dsa_s
@@ -506,6 +614,217 @@ static int mt7530_phy_write(struct dsa_s
return mdiobus_write_nested(priv->bus, port, regnum, val);
}
@ -368,7 +368,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
static void
mt7530_get_strings(struct dsa_switch *ds, int port, u32 stringset,
uint8_t *data)
@@ -621,9 +940,14 @@ unlock_exit:
@@ -622,9 +941,14 @@ unlock_exit:
}
static int
@ -385,7 +385,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
/* Enable Mediatek header mode on the cpu port */
mt7530_write(priv, MT7530_PVC_P(port),
PORT_SPEC_TAG);
@@ -636,7 +960,7 @@ mt7530_cpu_port_enable(struct mt7530_pri
@@ -637,7 +961,7 @@ mt7530_cpu_port_enable(struct mt7530_pri
mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port));
/* CPU port gets connected to all user ports of
@ -394,7 +394,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
*/
mt7530_write(priv, MT7530_PCR_P(port),
PCR_MATRIX(dsa_user_ports(priv->ds)));
@@ -1122,27 +1446,42 @@ mt7530_port_vlan_del(struct dsa_switch *
@@ -1123,27 +1447,42 @@ mt7530_port_vlan_del(struct dsa_switch *
return 0;
}
@ -444,7 +444,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
val = mt7530_read(priv, MT7530_PCR_P(port));
if (ingress) {
@@ -1157,7 +1496,7 @@ static int mt7530_port_mirror_add(struct
@@ -1158,7 +1497,7 @@ static int mt7530_port_mirror_add(struct
return 0;
}
@ -453,7 +453,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
struct dsa_mall_mirror_tc_entry *mirror)
{
struct mt7530_priv *priv = ds->priv;
@@ -1174,9 +1513,9 @@ static void mt7530_port_mirror_del(struc
@@ -1175,9 +1514,9 @@ static void mt7530_port_mirror_del(struc
mt7530_write(priv, MT7530_PCR_P(port), val);
if (!priv->mirror_rx && !priv->mirror_tx) {
@ -466,7 +466,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
}
}
@@ -1282,7 +1621,7 @@ mt7530_setup(struct dsa_switch *ds)
@@ -1283,7 +1622,7 @@ mt7530_setup(struct dsa_switch *ds)
PCR_MATRIX_CLR);
if (dsa_is_cpu_port(ds, i))
@ -475,7 +475,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
else
mt7530_port_disable(ds, i);
@@ -1336,6 +1675,118 @@ mt7530_setup(struct dsa_switch *ds)
@@ -1337,6 +1676,118 @@ mt7530_setup(struct dsa_switch *ds)
return 0;
}
@ -594,7 +594,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
static bool
mt7530_phy_mode_supported(struct dsa_switch *ds, int port,
const struct phylink_link_state *state)
@@ -1374,6 +1825,47 @@ unsupported:
@@ -1375,6 +1826,47 @@ unsupported:
return false;
}
@ -642,7 +642,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
static bool
mt753x_phy_mode_supported(struct dsa_switch *ds, int port,
const struct phylink_link_state *state)
@@ -1406,6 +1898,227 @@ mt7530_mac_config(struct dsa_switch *ds,
@@ -1407,6 +1899,227 @@ mt7530_mac_config(struct dsa_switch *ds,
return 0;
}
@ -870,7 +870,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
static int
mt753x_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
const struct phylink_link_state *state)
@@ -1441,6 +2154,8 @@ mt753x_phylink_mac_config(struct dsa_swi
@@ -1442,6 +2155,8 @@ mt753x_phylink_mac_config(struct dsa_swi
if (mt753x_mac_config(ds, port, mode, state) < 0)
goto unsupported;
@ -879,7 +879,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
break;
case 6: /* 1st cpu port */
if (priv->p6_interface == state->interface)
@@ -1460,7 +2175,8 @@ unsupported:
@@ -1461,7 +2176,8 @@ unsupported:
return;
}
@ -889,7 +889,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
dev_err(ds->dev, "%s: in-band negotiation unsupported\n",
__func__);
return;
@@ -1470,7 +2186,7 @@ unsupported:
@@ -1471,7 +2187,7 @@ unsupported:
mcr_new = mcr_cur;
mcr_new &= ~PMCR_LINK_SETTINGS_MASK;
mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN |
@ -898,7 +898,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
/* Are we connected to external phy */
if (port == 5 && dsa_is_user_port(ds, 5))
@@ -1480,7 +2196,18 @@ unsupported:
@@ -1481,7 +2197,18 @@ unsupported:
mt7530_write(priv, MT7530_PMCR_P(port), mcr_new);
}
@ -918,7 +918,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
unsigned int mode,
phy_interface_t interface)
{
@@ -1489,7 +2216,19 @@ static void mt7530_phylink_mac_link_down
@@ -1490,7 +2217,19 @@ static void mt7530_phylink_mac_link_down
mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
}
@ -939,7 +939,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
unsigned int mode,
phy_interface_t interface,
struct phy_device *phydev,
@@ -1499,18 +2238,29 @@ static void mt7530_phylink_mac_link_up(s
@@ -1500,18 +2239,29 @@ static void mt7530_phylink_mac_link_up(s
struct mt7530_priv *priv = ds->priv;
u32 mcr;
@ -971,7 +971,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
break;
}
if (duplex == DUPLEX_FULL) {
@@ -1524,6 +2274,45 @@ static void mt7530_phylink_mac_link_up(s
@@ -1525,6 +2275,45 @@ static void mt7530_phylink_mac_link_up(s
mt7530_set(priv, MT7530_PMCR_P(port), mcr);
}
@ -1017,7 +1017,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
static void
mt7530_mac_port_validate(struct dsa_switch *ds, int port,
unsigned long *supported)
@@ -1532,6 +2321,14 @@ mt7530_mac_port_validate(struct dsa_swit
@@ -1533,6 +2322,14 @@ mt7530_mac_port_validate(struct dsa_swit
phylink_set(supported, 1000baseX_Full);
}
@ -1032,7 +1032,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
static void
mt753x_phylink_validate(struct dsa_switch *ds, int port,
unsigned long *supported,
@@ -1548,7 +2345,8 @@ mt753x_phylink_validate(struct dsa_switc
@@ -1549,7 +2346,8 @@ mt753x_phylink_validate(struct dsa_switc
phylink_set_port_modes(mask);
@ -1042,7 +1042,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
phylink_set(mask, 10baseT_Half);
phylink_set(mask, 10baseT_Full);
phylink_set(mask, 100baseT_Half);
@@ -1567,6 +2365,11 @@ mt753x_phylink_validate(struct dsa_switc
@@ -1568,6 +2366,11 @@ mt753x_phylink_validate(struct dsa_switc
linkmode_and(supported, supported, mask);
linkmode_and(state->advertising, state->advertising, mask);
@ -1054,7 +1054,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
}
static int
@@ -1657,6 +2460,63 @@ static int mt7530_set_mac_eee(struct dsa
@@ -1658,6 +2461,63 @@ static int mt7530_set_mac_eee(struct dsa
return 0;
}
@ -1118,7 +1118,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
static int
mt753x_phylink_mac_link_state(struct dsa_switch *ds, int port,
struct phylink_link_state *state)
@@ -1710,13 +2570,14 @@ static const struct dsa_switch_ops mt753
@@ -1711,13 +2571,14 @@ static const struct dsa_switch_ops mt753
.port_vlan_prepare = mt7530_port_vlan_prepare,
.port_vlan_add = mt7530_port_vlan_add,
.port_vlan_del = mt7530_port_vlan_del,
@ -1137,7 +1137,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
.get_mac_eee = mt7530_get_mac_eee,
.set_mac_eee = mt7530_set_mac_eee,
};
@@ -1744,11 +2605,26 @@ static const struct mt753x_info mt753x_t
@@ -1745,11 +2606,26 @@ static const struct mt753x_info mt753x_t
.mac_port_get_state = mt7530_phylink_mac_link_state,
.mac_port_config = mt7530_mac_config,
},

2
target/linux/x86/patches-5.4/012-pcengines-apu2-detect-apuv4-board.patch
View File

@ -14,7 +14,7 @@ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
--- a/drivers/platform/x86/pcengines-apuv2.c
+++ b/drivers/platform/x86/pcengines-apuv2.c
@@ -186,6 +186,33 @@ static const struct dmi_system_id apu_gp
@@ -188,6 +188,33 @@ static const struct dmi_system_id apu_gp
},
.driver_data = (void *)&board_apu2,
},