ramips: add support for ELECOM WRC-2533GHBK-I
ELECOM WRC-2533GHBK-I is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 128 MiB - Flash : SPI-NOR 16 MiB - WLAN : 2.4/5 GHz 4T4R (2x MediaTek MT7615) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (SoC) - LED/keys : 4x/3x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J4: 3.3V, RX, GND, TX from SoC side - 57600n8 - Power : 12VDC, 1.5A Flash instruction using factory image: 1. Boot WRC-2533GHBK-I normally 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button 4. Wait ~150 seconds to complete flashing MAC addresses: LAN : BC:5C:4C:xx:xx:89 (Config, ethaddr (text)) WAN : BC:5C:4C:xx:xx:88 (Config, wanaddr (text)) 2.4GHz : BC:5C:4C:xx:xx:8A (Factory, 0x4 (hex)) 5GHz : BC:5C:4C:xx:xx:8B (Factory, 0x8004 (hex)) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Reviewed-by: Sungbo Eo <mans0n@gorani.run>
This commit is contained in:
INAGAKI Hiroshi
parent
0071c7cd82
commit
eb11cd9ea3
|
|
@ -157,7 +157,7 @@ endef
|
|||
|
||||
define Build/elecom-product-header
|
||||
$(eval product=$(word 1,$(1)))
|
||||
$(eval fw=$(word 2,$(1)))
|
||||
$(eval fw=$(if $(word 2,$(1)),$(word 2,$(1)),$@))
|
||||
|
||||
( \
|
||||
echo -n -e "ELECOM\x00\x00$(product)" | dd bs=40 count=1 conv=sync; \
|
||||
|
|
|
|||
|
|
@ -0,0 +1,199 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "elecom,wrc-2533ghbk-i", "mediatek,mt7621-soc";
|
||||
model = "ELECOM WRC-2533GHBK-I";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
wps {
|
||||
label = "red:wps";
|
||||
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_power: power {
|
||||
label = "white:power";
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
label = "white:wlan2g";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "phy0radio";
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "white:wlan5g";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "phy1radio";
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
auto {
|
||||
label = "auto";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0x9a0000>;
|
||||
};
|
||||
|
||||
partition@9f0000 {
|
||||
label = "TM_1";
|
||||
reg = <0x9f0000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@bf0000 {
|
||||
label = "TM_2";
|
||||
reg = <0xbf0000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@df0000 {
|
||||
label = "manufacture";
|
||||
reg = <0xdf0000 0x180000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@f70000 {
|
||||
label = "backup";
|
||||
reg = <0xf70000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@f80000 {
|
||||
label = "storage";
|
||||
reg = <0xf80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@0 {
|
||||
status = "okay";
|
||||
label = "wan";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
status = "okay";
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
status = "okay";
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
status = "okay";
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
status = "okay";
|
||||
label = "lan1";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "uart2", "uart3", "jtag", "wdt";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0>;
|
||||
ieee80211-freq-limit = <2400000 2500000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&xhci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -466,6 +466,20 @@ define Device/elecom_wrc-1900gst
|
|||
endef
|
||||
TARGET_DEVICES += elecom_wrc-1900gst
|
||||
|
||||
define Device/elecom_wrc-2533ghbk-i
|
||||
$(Device/dsa-migration)
|
||||
$(Device/uimage-lzma-loader)
|
||||
DEVICE_VENDOR := ELECOM
|
||||
DEVICE_MODEL := WRC-2533GHBK-I
|
||||
IMAGE_SIZE := 9856k
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
|
||||
elx-header 0107002d 8844A2D168B45A2D | \
|
||||
elecom-product-header WRC-2533GHBK-I
|
||||
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
||||
endef
|
||||
TARGET_DEVICES += elecom_wrc-2533ghbk-i
|
||||
|
||||
define Device/elecom_wrc-2533gst
|
||||
$(Device/elecom_wrc-gs)
|
||||
IMAGE_SIZE := 11264k
|
||||
|
|
|
|||
|
|
@ -98,6 +98,11 @@ ramips_setup_macs()
|
|||
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
|
||||
wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
|
||||
;;
|
||||
elecom,wrc-2533ghbk-i)
|
||||
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
|
||||
wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
|
||||
label_mac=$wan_mac
|
||||
;;
|
||||
hiwifi,hc5962)
|
||||
lan_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ")
|
||||
label_mac=$lan_mac
|
||||
|
|
|
|||
Loading…
Reference in New Issue