ath79: add support for Compex WPJ558 (16M)
Specifications: - SoC: QCA9558 - DRAM: 128MB DDR2 - Flash: 16MB SPI-NOR - Wireless: on-board abgn 2×2 2.4GHz radio - Ethernet: 2x 10/100/1000 Mbps (1x 802.11af PoE) - miniPCIe slot Flash instruction: - From u-boot tftpboot 0x80500000 openwrt-ath79-generic-compex_wpj558-16m-squashfs-sysupgrade.bin erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize boot - From cpximg loader The cpximg loader can be started either by holding the reset button during power up. Once it's running, a TFTP-server under 192.168.1.1 will accept the image appropriate for the board revision that is etched on the board. For example, if the board is labelled '6A07': tftp -v -m binary 192.168.1.1 -c put openwrt-ath79-generic-compex_wpj558-16m-squashfs-cpximg-6a07.bin Signed-off-by: Romain Mahoux <romain@mahoux.fr> [convert to nvmem, remove redundant lan_mac in 02_network] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Romain Mahoux
parent
269758a5bc
commit
e2d08084c3
|
|
@ -0,0 +1,143 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#include "qca955x.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "compex,wpj558-16m", "qca,qca9558";
|
||||
model = "Compex WPJ558 (16MB flash)";
|
||||
|
||||
aliases {
|
||||
label-mac-device = ð0;
|
||||
led-boot = &led_sig4;
|
||||
led-failsafe = &led_sig4;
|
||||
led-running = &led_sig4;
|
||||
led-upgrade = &led_sig4;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
sig1 {
|
||||
label = "red:sig1";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
sig2 {
|
||||
label = "yellow:sig2";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
sig3 {
|
||||
label = "green:sig3";
|
||||
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_sig4: sig4 {
|
||||
label = "green:sig4";
|
||||
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "Reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
beeper {
|
||||
compatible = "gpio-beeper";
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
m25p,fast-read;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
uboot: partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x030000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
firmware@30000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x030000 0xfc0000>;
|
||||
};
|
||||
|
||||
art: partition@ff0000 {
|
||||
label = "art";
|
||||
reg = <0xff0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
|
||||
qca,ar8327-initvals = <
|
||||
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
|
||||
0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
|
||||
0x50 0xcc35cc35 /* LED_CTRL0 */
|
||||
0x54 0x00000000 /* LED_CTRL1 */
|
||||
0x58 0x00000000 /* LED_CTRL2 */
|
||||
0x5c 0x03ffff00 /* LED_CTRL3 */
|
||||
0x7c 0x0000007e /* PORT0_STATUS */
|
||||
0x94 0x0000007e /* PORT6 STATUS */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
pll-data = <0x56000000 0x00000101 0x00001616>;
|
||||
phy-handle = <&phy0>;
|
||||
|
||||
nvmem-cells = <&macaddr_uboot_2e010>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
mtd-cal-data = <&art 0x1000>;
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uboot {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_uboot_2e010: macaddr@2e010 {
|
||||
reg = <0x2e010 0x6>;
|
||||
};
|
||||
};
|
||||
|
|
@ -221,6 +221,10 @@ ath79_setup_interfaces()
|
|||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "3:lan" "2:wan"
|
||||
;;
|
||||
compex,wpj558-16m)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:wan" "5:lan" "6@eth0"
|
||||
;;
|
||||
devolo,dlan-pro-1200plus-ac|\
|
||||
devolo,magic-2-wifi)
|
||||
ucidef_add_switch "switch0" \
|
||||
|
|
@ -528,6 +532,7 @@ ath79_setup_macs()
|
|||
wan_mac=$(macaddr_add $(mtd_get_mac_binary art 0x0) 1)
|
||||
;;
|
||||
compex,wpj344-16m|\
|
||||
compex,wpj558-16m|\
|
||||
compex,wpj563)
|
||||
wan_mac=$(mtd_get_mac_binary u-boot 0x2e018)
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -682,6 +682,20 @@ define Device/compex_wpj531-16m
|
|||
endef
|
||||
TARGET_DEVICES += compex_wpj531-16m
|
||||
|
||||
define Device/compex_wpj558-16m
|
||||
SOC := qca9558
|
||||
IMAGE_SIZE := 16128k
|
||||
DEVICE_VENDOR := Compex
|
||||
DEVICE_MODEL := WPJ558
|
||||
DEVICE_VARIANT := 16M
|
||||
SUPPORTED_DEVICES += wpj558
|
||||
IMAGES += cpximg-6a07.bin
|
||||
IMAGE/cpximg-6a07.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
||||
append-rootfs | pad-rootfs | mkmylofw_16m 0x691 3
|
||||
DEVICE_PACKAGES := kmod-gpio-beeper
|
||||
endef
|
||||
TARGET_DEVICES += compex_wpj558-16m
|
||||
|
||||
define Device/compex_wpj563
|
||||
SOC := qca9563
|
||||
DEVICE_PACKAGES := kmod-usb2 kmod-usb3
|
||||
|
|
|
|||
Loading…
Reference in New Issue