ipq40xx: fixup remaining devices that dont use QCA807x PHY

Like AVM 1200 these devices also do not use QCA807x PHY at all and thus
they disables all of the individual PHY nodes, however this is not enough
anymore since the conversion to PHY package.

Now its now enough to disable the PHY-s in the package alone, but the PHY
package node itself must also be disabled.

Fixes: 1b931c33a2 ("ipq40xx: adapt to new Upstream QCA807x PHY driver")
Link: https://github.com/openwrt/openwrt/pull/15444
Signed-off-by: Robert Marko <robimarko@gmail.com>

target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-lhgg-60ad.dts

@@ -243,6 +243,18 @@
 
 &mdio {
 	status = "okay";
+
+	ar8035: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&qca807x {
+	status = "disabled";
+};
+
+&ethphy0 {
+	status = "disabled";
 };
 
 &ethphy1 {
@@ -279,6 +291,6 @@
 	status = "okay";
 
 	label = "lan";
-	phy-handle = <&ethphy0>;
+	phy-handle = <&ar8035>;
 	phy-mode = "rgmii-id";
 };

target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-aruba-glenmorangie.dtsi

@@ -232,6 +232,10 @@
 	phy-mode = "rgmii-id";
 };
 
+&qca807x {
+	status = "disabled";
+};
+
 &ethphy0 {
 	status = "disabled";
 };

target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-insect-common.dtsi

@@ -401,6 +401,10 @@
 	status = "okay";
 	pinctrl-0 = <&mdio_pins>;
 	pinctrl-names = "default";
+
+	ar8035: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
 &gmac {
@@ -419,14 +423,22 @@
 	status = "okay";
 
 	label = "lan";
-	phy-handle = <&ethphy1>;
+	phy-handle = <&ar8035>;
 	phy-mode = "rgmii-rxid";
 };
 
+&qca807x {
+	status = "disabled";
+};
+
 &ethphy0 {
 	status = "disabled";
 };
 
+&ethphy1 {
+	status = "disabled";
+};
+
 &ethphy2 {
 	status = "disabled";
 };