bcm47xx: add support for kernel 5.4

Ethernet, switch, LEDs, buttons, USB, sysupgrade & LuCI were
successfully tested on BCM4706.

WARNING: Hack for BCM4710 adding BCM4710_PROTECTED_FILL_TLB() to the
local_r4k_flush_cache_sigtramp() could not be ported. That function has
been dropped in:
commit adcc81f148d7 ("MIPS: math-emu: Write-protect delay slot emulation pages")
commit 3315b6b336c8 ("MIPS: Delete unused flush_cache_sigtramp()")
it's unsure if that chipset will still work reliably.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
This commit is contained in:
Rafał Miłecki 2020-03-10 15:46:49 +01:00
parent 5c98041d5a
commit d369d92fc7
21 changed files with 2301 additions and 1 deletions

View File

@ -14,7 +14,7 @@ SUBTARGETS:=generic mips74k legacy
MAINTAINER:=Hauke Mehrtens <hauke@hauke-m.de>
KERNEL_PATCHVER:=4.19
KERNEL_TESTING_PATCHVER := 4.19
KERNEL_TESTING_PATCHVER:=5.4
define Target/Description
Build firmware images for Broadcom based BCM47xx/53xx routers with MIPS CPU, *not* ARM.

View File

@ -0,0 +1,209 @@
CONFIG_ADM6996_PHY=y
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MMAP_RND_BITS_MAX=15
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_BCM47XX=y
CONFIG_BCM47XX_BCMA=y
CONFIG_BCM47XX_NVRAM=y
CONFIG_BCM47XX_SPROM=y
CONFIG_BCM47XX_SSB=y
CONFIG_BCM47XX_WDT=y
CONFIG_BCMA=y
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_DEBUG=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DRIVER_MIPS=y
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_NFLASH=y
CONFIG_BCMA_PFLASH=y
CONFIG_BCMA_SFLASH=y
# CONFIG_BGMAC_BCMA is not set
CONFIG_BLK_MQ_PCI=y
CONFIG_CEVT_R4K=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="noinitrd console=ttyS0,115200"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
# CONFIG_CPU_BMIPS is not set
CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
CONFIG_CPU_MIPSR1=y
CONFIG_CPU_MIPSR2_IRQ_VI=y
CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CSRC_R4K=y
CONFIG_DMA_DIRECT_OPS=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NONCOHERENT_CACHE_SYNC=y
CONFIG_DMA_NONCOHERENT_MMAP=y
CONFIG_DMA_NONCOHERENT_OPS=y
# CONFIG_EARLY_PRINTK is not set
CONFIG_FIXED_PHY=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_LIB_ASHLDI3=y
CONFIG_GENERIC_LIB_ASHRDI3=y
CONFIG_GENERIC_LIB_CMPDI2=y
CONFIG_GENERIC_LIB_LSHRDI3=y
CONFIG_GENERIC_LIB_UCMPDI2=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_WDT=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAVE_ARCH_COMPILER_H=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CBPF_JIT=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=y
CONFIG_HZ_PERIODIC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
CONFIG_LEDS_GPIO_REGISTER=y
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MEMFD_CREATE=y
CONFIG_MIGRATION=y
CONFIG_MIPS=y
CONFIG_MIPS_ASID_BITS=8
CONFIG_MIPS_ASID_SHIFT=0
CONFIG_MIPS_CLOCK_VSYSCALL=y
# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MTD_BCM47XXSFLASH=y
CONFIG_MTD_BCM47XX_PARTS=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_BCM47XXNFLASH=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_PARSER_TRX=y
CONFIG_MTD_PHYSMAP=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NO_EXCEPT_FILL=y
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
# CONFIG_OF is not set
CONFIG_PCI=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DRIVERS_LEGACY=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SRCU=y
CONFIG_SSB=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_DRIVER_EXTIF=y
CONFIG_SSB_DRIVER_GIGE=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_SSB_DRIVER_MIPS=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_EMBEDDED=y
CONFIG_SSB_HOST_SOC=y
CONFIG_SSB_PCICORE_HOSTMODE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_SERIAL=y
CONFIG_SSB_SFLASH=y
CONFIG_SSB_SPROM=y
CONFIG_SWCONFIG=y
CONFIG_SWCONFIG_B53=y
# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
CONFIG_SWCONFIG_B53_PHY_DRIVER=y
CONFIG_SWCONFIG_B53_PHY_FIXUP=y
# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
CONFIG_SWPHY=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_BMIPS=y
CONFIG_SYS_HAS_CPU_BMIPS32_3300=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_HIGHMEM=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_MIPS16=y
CONFIG_SYS_SUPPORTS_ZBOOT=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TINY_SRCU=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y
CONFIG_WATCHDOG_CORE=y

View File

@ -0,0 +1,492 @@
--- a/arch/mips/include/asm/r4kcache.h
+++ b/arch/mips/include/asm/r4kcache.h
@@ -26,6 +26,38 @@
extern void (*r4k_blast_dcache)(void);
extern void (*r4k_blast_icache)(void);
+#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2)
+#include <asm/paccess.h>
+#include <linux/ssb/ssb.h>
+#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg()
+
+static inline unsigned long bcm4710_dummy_rreg(void)
+{
+ return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE));
+}
+
+#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr))
+
+static inline unsigned long bcm4710_fill_tlb(void *addr)
+{
+ return *(unsigned long *)addr;
+}
+
+#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr))
+
+static inline void bcm4710_protected_fill_tlb(void *addr)
+{
+ unsigned long x;
+ get_dbe(x, (unsigned long *)addr);;
+}
+
+#else
+#define BCM4710_DUMMY_RREG()
+
+#define BCM4710_FILL_TLB(addr)
+#define BCM4710_PROTECTED_FILL_TLB(addr)
+#endif
+
/*
* This macro return a properly sign-extended address suitable as base address
* for indexed cache operations. Two issues here:
@@ -56,6 +88,7 @@ static inline void flush_icache_line_ind
static inline void flush_dcache_line_indexed(unsigned long addr)
{
+ BCM4710_DUMMY_RREG();
cache_op(Index_Writeback_Inv_D, addr);
}
@@ -79,11 +112,13 @@ static inline void flush_icache_line(uns
static inline void flush_dcache_line(unsigned long addr)
{
+ BCM4710_DUMMY_RREG();
cache_op(Hit_Writeback_Inv_D, addr);
}
static inline void invalidate_dcache_line(unsigned long addr)
{
+ BCM4710_DUMMY_RREG();
cache_op(Hit_Invalidate_D, addr);
}
@@ -156,6 +191,7 @@ static inline int protected_flush_icache
#ifdef CONFIG_EVA
return protected_cachee_op(Hit_Invalidate_I, addr);
#else
+ BCM4710_DUMMY_RREG();
return protected_cache_op(Hit_Invalidate_I, addr);
#endif
}
@@ -169,6 +205,7 @@ static inline int protected_flush_icache
*/
static inline int protected_writeback_dcache_line(unsigned long addr)
{
+ BCM4710_DUMMY_RREG();
#ifdef CONFIG_EVA
return protected_cachee_op(Hit_Writeback_Inv_D, addr);
#else
@@ -526,8 +563,51 @@ static inline void invalidate_tcache_pag
: "r" (base), \
"i" (op));
+static inline void blast_dcache(void)
+{
+ unsigned long start = KSEG0;
+ unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
+ unsigned long end = (start + dcache_size);
+
+ do {
+ BCM4710_DUMMY_RREG();
+ cache_op(Index_Writeback_Inv_D, start);
+ start += current_cpu_data.dcache.linesz;
+ } while(start < end);
+}
+
+static inline void blast_dcache_page(unsigned long page)
+{
+ unsigned long start = page;
+ unsigned long end = start + PAGE_SIZE;
+
+ BCM4710_FILL_TLB(start);
+ do {
+ BCM4710_DUMMY_RREG();
+ cache_op(Hit_Writeback_Inv_D, start);
+ start += current_cpu_data.dcache.linesz;
+ } while(start < end);
+}
+
+static inline void blast_dcache_page_indexed(unsigned long page)
+{
+ unsigned long start = page;
+ unsigned long end = start + PAGE_SIZE;
+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
+ unsigned long ws_end = current_cpu_data.dcache.ways <<
+ current_cpu_data.dcache.waybit;
+ unsigned long ws, addr;
+ for (ws = 0; ws < ws_end; ws += ws_inc) {
+ start = page + ws;
+ for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
+ BCM4710_DUMMY_RREG();
+ cache_op(Index_Writeback_Inv_D, addr);
+ }
+ }
+}
+
/* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
-#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra) \
+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra, war) \
static inline void extra##blast_##pfx##cache##lsize(void) \
{ \
unsigned long start = INDEX_BASE; \
@@ -537,6 +617,7 @@ static inline void extra##blast_##pfx##c
current_cpu_data.desc.waybit; \
unsigned long ws, addr; \
\
+ war \
for (ws = 0; ws < ws_end; ws += ws_inc) \
for (addr = start; addr < end; addr += lsize * 32) \
cache##lsize##_unroll32(addr|ws, indexop); \
@@ -547,6 +628,7 @@ static inline void extra##blast_##pfx##c
unsigned long start = page; \
unsigned long end = page + PAGE_SIZE; \
\
+ war \
do { \
cache##lsize##_unroll32(start, hitop); \
start += lsize * 32; \
@@ -563,31 +645,32 @@ static inline void extra##blast_##pfx##c
current_cpu_data.desc.waybit; \
unsigned long ws, addr; \
\
+ war \
for (ws = 0; ws < ws_end; ws += ws_inc) \
for (addr = start; addr < end; addr += lsize * 32) \
cache##lsize##_unroll32(addr|ws, indexop); \
}
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, )
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, )
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_)
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, )
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, )
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, )
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
-
-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, , )
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, , BCM4710_FILL_TLB(start);)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, , )
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, , )
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, , BCM4710_FILL_TLB(start);)
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_, BCM4710_FILL_TLB(start);)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, , )
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, , )
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, , BCM4710_FILL_TLB(start);)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, , )
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, , )
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, , )
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, , )
+
+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, , )
+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, , )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, , )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, , )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, , )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, , )
#define __BUILD_BLAST_USER_CACHE(pfx, desc, indexop, hitop, lsize) \
static inline void blast_##pfx##cache##lsize##_user_page(unsigned long page) \
@@ -612,58 +695,29 @@ __BUILD_BLAST_USER_CACHE(d, dcache, Inde
__BUILD_BLAST_USER_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
/* build blast_xxx_range, protected_blast_xxx_range */
-#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra) \
+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra, war, war2) \
static inline void prot##extra##blast_##pfx##cache##_range(unsigned long start, \
unsigned long end) \
{ \
unsigned long lsize = cpu_##desc##_line_size(); \
- unsigned long lsize_2 = lsize * 2; \
- unsigned long lsize_3 = lsize * 3; \
- unsigned long lsize_4 = lsize * 4; \
- unsigned long lsize_5 = lsize * 5; \
- unsigned long lsize_6 = lsize * 6; \
- unsigned long lsize_7 = lsize * 7; \
- unsigned long lsize_8 = lsize * 8; \
unsigned long addr = start & ~(lsize - 1); \
- unsigned long aend = (end + lsize - 1) & ~(lsize - 1); \
- int lines = (aend - addr) / lsize; \
- \
- while (lines >= 8) { \
- prot##cache_op(hitop, addr); \
- prot##cache_op(hitop, addr + lsize); \
- prot##cache_op(hitop, addr + lsize_2); \
- prot##cache_op(hitop, addr + lsize_3); \
- prot##cache_op(hitop, addr + lsize_4); \
- prot##cache_op(hitop, addr + lsize_5); \
- prot##cache_op(hitop, addr + lsize_6); \
- prot##cache_op(hitop, addr + lsize_7); \
- addr += lsize_8; \
- lines -= 8; \
- } \
- \
- if (lines & 0x4) { \
- prot##cache_op(hitop, addr); \
- prot##cache_op(hitop, addr + lsize); \
- prot##cache_op(hitop, addr + lsize_2); \
- prot##cache_op(hitop, addr + lsize_3); \
- addr += lsize_4; \
- } \
+ unsigned long aend = (end - 1) & ~(lsize - 1); \
\
- if (lines & 0x2) { \
- prot##cache_op(hitop, addr); \
- prot##cache_op(hitop, addr + lsize); \
- addr += lsize_2; \
- } \
+ war \
\
- if (lines & 0x1) { \
+ while (1) { \
+ war2 \
prot##cache_op(hitop, addr); \
+ if (addr == aend) \
+ break; \
+ addr += lsize; \
} \
}
#ifndef CONFIG_EVA
-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, )
-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, )
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, , BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, , , )
#else
@@ -697,15 +751,15 @@ __BUILD_PROT_BLAST_CACHE_RANGE(d, dcache
__BUILD_PROT_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I)
#endif
-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, )
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, , , )
__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I_Loongson2, \
- protected_, loongson2_)
-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , )
-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , )
-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , )
+ protected_, loongson2_, , )
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , , BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , , , )
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , , , )
/* blast_inv_dcache_range */
-__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , )
-__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , )
+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , , , BCM4710_DUMMY_RREG();)
+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , , , )
/* Currently, this is very specific to Loongson-3 */
#define __BUILD_BLAST_CACHE_NODE(pfx, desc, indexop, hitop, lsize) \
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -429,6 +429,10 @@
#else
.set push
.set arch=r4000
+#ifdef CONFIG_BCM47XX
+ nop
+ nop
+#endif
eret
.set pop
#endif
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -21,6 +21,19 @@
#include <asm/war.h>
#include <asm/thread_info.h>
+#ifdef CONFIG_BCM47XX
+# ifdef eret
+# undef eret
+# endif
+# define eret \
+ .set push; \
+ .set noreorder; \
+ nop; \
+ nop; \
+ eret; \
+ .set pop;
+#endif
+
__INIT
/*
@@ -32,6 +45,9 @@
NESTED(except_vec3_generic, 0, sp)
.set push
.set noat
+#ifdef CONFIG_BCM47XX
+ nop
+#endif
mfc0 k1, CP0_CAUSE
andi k1, k1, 0x7c
#ifdef CONFIG_64BIT
@@ -52,6 +68,9 @@ NESTED(except_vec3_r4000, 0, sp)
.set push
.set arch=r4000
.set noat
+#ifdef CONFIG_BCM47XX
+ nop
+#endif
mfc0 k1, CP0_CAUSE
li k0, 31<<2
andi k1, k1, 0x7c
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -39,6 +39,9 @@
#include <asm/dma-coherence.h>
#include <asm/mips-cps.h>
+/* For enabling BCM4710 cache workarounds */
+static int bcm4710 = 0;
+
/*
* Bits describing what cache ops an SMP callback function may perform.
*
@@ -190,6 +193,9 @@ static void r4k_blast_dcache_user_page_s
{
unsigned long dc_lsize = cpu_dcache_line_size();
+ if (bcm4710)
+ r4k_blast_dcache_page = blast_dcache_page;
+ else
if (dc_lsize == 0)
r4k_blast_dcache_user_page = (void *)cache_noop;
else if (dc_lsize == 16)
@@ -208,6 +214,9 @@ static void r4k_blast_dcache_page_indexe
{
unsigned long dc_lsize = cpu_dcache_line_size();
+ if (bcm4710)
+ r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
+ else
if (dc_lsize == 0)
r4k_blast_dcache_page_indexed = (void *)cache_noop;
else if (dc_lsize == 16)
@@ -227,6 +236,9 @@ static void r4k_blast_dcache_setup(void)
{
unsigned long dc_lsize = cpu_dcache_line_size();
+ if (bcm4710)
+ r4k_blast_dcache = blast_dcache;
+ else
if (dc_lsize == 0)
r4k_blast_dcache = (void *)cache_noop;
else if (dc_lsize == 16)
@@ -1775,6 +1787,17 @@ static void coherency_setup(void)
* silly idea of putting something else there ...
*/
switch (current_cpu_type()) {
+ case CPU_BMIPS3300:
+ {
+ u32 cm;
+ cm = read_c0_diag();
+ /* Enable icache */
+ cm |= (1 << 31);
+ /* Enable dcache */
+ cm |= (1 << 30);
+ write_c0_diag(cm);
+ }
+ break;
case CPU_R4000PC:
case CPU_R4000SC:
case CPU_R4000MC:
@@ -1821,6 +1844,15 @@ void r4k_cache_init(void)
extern void build_copy_page(void);
struct cpuinfo_mips *c = &current_cpu_data;
+ /* Check if special workarounds are required */
+#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2)
+ if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) {
+ printk("Enabling BCM4710A0 cache workarounds.\n");
+ bcm4710 = 1;
+ } else
+#endif
+ bcm4710 = 0;
+
probe_pcache();
probe_vcache();
setup_scache();
@@ -1897,7 +1929,15 @@ void r4k_cache_init(void)
*/
local_r4k___flush_cache_all(NULL);
+#ifdef CONFIG_BCM47XX
+ {
+ static void (*_coherency_setup)(void);
+ _coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
+ _coherency_setup();
+ }
+#else
coherency_setup();
+#endif
board_cache_error_setup = r4k_cache_error_setup;
/*
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -980,6 +980,9 @@ void build_get_pgde32(u32 **p, unsigned
uasm_i_srl(p, ptr, ptr, SMP_CPUID_PTRSHIFT);
uasm_i_addu(p, ptr, tmp, ptr);
#else
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(p);
+#endif
UASM_i_LA_mostly(p, ptr, pgdc);
#endif
uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
@@ -1341,6 +1344,9 @@ static void build_r4000_tlb_refill_handl
#ifdef CONFIG_64BIT
build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
#else
+# ifdef CONFIG_BCM47XX
+ uasm_i_nop(&p);
+# endif
build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
#endif
@@ -1352,6 +1358,9 @@ static void build_r4000_tlb_refill_handl
build_update_entries(&p, K0, K1);
build_tlb_write_entry(&p, &l, &r, tlb_random);
uasm_l_leave(&l, p);
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(&p);
+#endif
uasm_i_eret(&p); /* return from trap */
}
#ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
@@ -2049,6 +2058,9 @@ build_r4000_tlbchange_handler_head(u32 *
#ifdef CONFIG_64BIT
build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
#else
+# ifdef CONFIG_BCM47XX
+ uasm_i_nop(p);
+# endif
build_get_pgde32(p, wr.r1, wr.r2); /* get pgd in ptr */
#endif
@@ -2095,6 +2107,9 @@ build_r4000_tlbchange_handler_tail(u32 *
build_tlb_write_entry(p, l, r, tlb_indexed);
uasm_l_leave(l, *p);
build_restore_work_registers(p);
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(p);
+#endif
uasm_i_eret(p); /* return from trap */
#ifdef CONFIG_64BIT

View File

@ -0,0 +1,78 @@
From: Jeff Hansen <jhansen@cardaccess-inc.com>
Subject: [PATCH] kmap_coherent
On ASUS WL-500gP there are some "Data bus error"s when executing simple
commands liks "ps" or "cat /proc/1/cmdline".
This fixes OpenWrt ticket #1485: https://dev.openwrt.org/ticket/1485
---
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -243,6 +243,9 @@
#ifndef cpu_has_pindexed_dcache
#define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
#endif
+#ifndef cpu_use_kmap_coherent
+#define cpu_use_kmap_coherent 1
+#endif
/*
* I-Cache snoops remote store. This only matters on SMP. Some multiprocessors
--- a/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
@@ -80,4 +80,6 @@
#define cpu_scache_line_size() 0
#define cpu_has_vz 0
+#define cpu_use_kmap_coherent 0
+
#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -697,7 +697,7 @@ static inline void local_r4k_flush_cache
map_coherent = (cpu_has_dc_aliases &&
page_mapcount(page) &&
!Page_dcache_dirty(page));
- if (map_coherent)
+ if (map_coherent && cpu_use_kmap_coherent)
vaddr = kmap_coherent(page, addr);
else
vaddr = kmap_atomic(page);
@@ -719,7 +719,7 @@ static inline void local_r4k_flush_cache
}
if (vaddr) {
- if (map_coherent)
+ if (map_coherent && cpu_use_kmap_coherent)
kunmap_coherent();
else
kunmap_atomic(vaddr);
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -174,7 +174,7 @@ void copy_user_highpage(struct page *to,
void *vfrom, *vto;
vto = kmap_atomic(to);
- if (cpu_has_dc_aliases &&
+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
page_mapcount(from) && !Page_dcache_dirty(from)) {
vfrom = kmap_coherent(from, vaddr);
copy_page(vto, vfrom);
@@ -196,7 +196,7 @@ void copy_to_user_page(struct vm_area_st
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)
{
- if (cpu_has_dc_aliases &&
+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
page_mapcount(page) && !Page_dcache_dirty(page)) {
void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(vto, src, len);
@@ -214,7 +214,7 @@ void copy_from_user_page(struct vm_area_
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)
{
- if (cpu_has_dc_aliases &&
+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
page_mapcount(page) && !Page_dcache_dirty(page)) {
void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(dst, vfrom, len);

View File

@ -0,0 +1,121 @@
From b36f694256f41bc71571f467646d015dda128d14 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat, 9 Nov 2013 17:03:59 +0100
Subject: [PATCH 210/210] b44: register adm switch
---
drivers/net/ethernet/broadcom/b44.c | 57 +++++++++++++++++++++++++++++++++++
drivers/net/ethernet/broadcom/b44.h | 3 ++
2 files changed, 60 insertions(+)
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -31,6 +31,8 @@
#include <linux/ssb/ssb.h>
#include <linux/slab.h>
#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/adm6996-gpio.h>
#include <linux/uaccess.h>
#include <asm/io.h>
@@ -2249,6 +2251,69 @@ static void b44_adjust_link(struct net_d
}
}
+#ifdef CONFIG_BCM47XX
+static int b44_register_adm_switch(struct b44 *bp)
+{
+ int gpio;
+ struct platform_device *pdev;
+ struct adm6996_gpio_platform_data adm_data = {0};
+ struct platform_device_info info = {0};
+
+ adm_data.model = ADM6996L;
+ gpio = bcm47xx_nvram_gpio_pin("adm_eecs");
+ if (gpio >= 0)
+ adm_data.eecs = gpio;
+ else
+ adm_data.eecs = 2;
+
+ gpio = bcm47xx_nvram_gpio_pin("adm_eesk");
+ if (gpio >= 0)
+ adm_data.eesk = gpio;
+ else
+ adm_data.eesk = 3;
+
+ gpio = bcm47xx_nvram_gpio_pin("adm_eedi");
+ if (gpio >= 0)
+ adm_data.eedi = gpio;
+ else
+ adm_data.eedi = 4;
+
+ /*
+ * We ignore the "adm_rc" GPIO here. The driver does not use it,
+ * and it conflicts with the Reset button GPIO on the Linksys WRT54GSv1.
+ */
+
+ info.parent = bp->sdev->dev;
+ info.name = "adm6996_gpio";
+ info.id = -1;
+ info.data = &adm_data;
+ info.size_data = sizeof(adm_data);
+
+ if (!bp->adm_switch) {
+ pdev = platform_device_register_full(&info);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ bp->adm_switch = pdev;
+ }
+ return 0;
+}
+static void b44_unregister_adm_switch(struct b44 *bp)
+{
+ if (bp->adm_switch)
+ platform_device_unregister(bp->adm_switch);
+}
+#else
+static int b44_register_adm_switch(struct b44 *bp)
+{
+ return 0;
+}
+static void b44_unregister_adm_switch(struct b44 *bp)
+{
+
+}
+#endif /* CONFIG_BCM47XX */
+
static int b44_register_phy_one(struct b44 *bp)
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
@@ -2285,6 +2350,9 @@ static int b44_register_phy_one(struct b
if (!mdiobus_is_registered_device(bp->mii_bus, bp->phy_addr) &&
(sprom->boardflags_lo & (B44_BOARDFLAG_ROBO | B44_BOARDFLAG_ADM))) {
+ if (sprom->boardflags_lo & B44_BOARDFLAG_ADM)
+ b44_register_adm_switch(bp);
+
dev_info(sdev->dev,
"could not find PHY at %i, use fixed one\n",
bp->phy_addr);
@@ -2480,6 +2548,7 @@ static void b44_remove_one(struct ssb_de
unregister_netdev(dev);
if (bp->flags & B44_FLAG_EXTERNAL_PHY)
b44_unregister_phy_one(bp);
+ b44_unregister_adm_switch(bp);
ssb_device_disable(sdev, 0);
ssb_bus_may_powerdown(sdev->bus);
netif_napi_del(&bp->napi);
--- a/drivers/net/ethernet/broadcom/b44.h
+++ b/drivers/net/ethernet/broadcom/b44.h
@@ -408,6 +408,9 @@ struct b44 {
struct mii_bus *mii_bus;
int old_link;
struct mii_if_info mii_if;
+
+ /* platform device for associated switch */
+ struct platform_device *adm_switch;
};
#endif /* _B44_H */

View File

@ -0,0 +1,54 @@
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -431,10 +431,34 @@ static void b44_wap54g10_workaround(stru
error:
pr_warn("PHY: cannot reset MII transceiver isolate bit\n");
}
+
+static void b44_bcm47xx_workarounds(struct b44 *bp)
+{
+ char buf[20];
+ struct ssb_device *sdev = bp->sdev;
+
+ /* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
+ if (sdev->bus->sprom.board_num == 100) {
+ bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
+ } else {
+ /* WL-HDD */
+ if (bcm47xx_nvram_getenv("hardware_version", buf, sizeof(buf)) >= 0 &&
+ !strncmp(buf, "WL300-", strlen("WL300-"))) {
+ if (sdev->bus->sprom.et0phyaddr == 0 &&
+ sdev->bus->sprom.et1phyaddr == 1)
+ bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
+ }
+ }
+ return;
+}
#else
static inline void b44_wap54g10_workaround(struct b44 *bp)
{
}
+
+static inline void b44_bcm47xx_workarounds(struct b44 *bp)
+{
+}
#endif
static int b44_setup_phy(struct b44 *bp)
@@ -443,6 +467,7 @@ static int b44_setup_phy(struct b44 *bp)
int err;
b44_wap54g10_workaround(bp);
+ b44_bcm47xx_workarounds(bp);
if (bp->flags & B44_FLAG_EXTERNAL_PHY)
return 0;
@@ -2179,6 +2204,8 @@ static int b44_get_invariants(struct b44
* valid PHY address. */
bp->phy_addr &= 0x1F;
+ b44_bcm47xx_workarounds(bp);
+
memcpy(bp->dev->dev_addr, addr, ETH_ALEN);
if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){

View File

@ -0,0 +1,25 @@
This prevents the options from being delete with make kernel_oldconfig.
---
drivers/ssb/Kconfig | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -32,6 +32,7 @@ config BCMA_HOST_PCI
config BCMA_HOST_SOC
bool "Support for BCMA in a SoC"
depends on HAS_IOMEM
+ select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD
help
Host interface for a Broadcom AIX bus directly mapped into
the memory. This only works with the Broadcom SoCs from the
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -136,6 +136,7 @@ config SSB_SFLASH
config SSB_EMBEDDED
bool
depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
+ select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD
default y
config SSB_DRIVER_EXTIF

View File

@ -0,0 +1,21 @@
From: Wolfram Joost <dbox2@frokaschwei.de>
Subject: [PATCH] fork_cacheflush
On ASUS WL-500gP there are many unexpected "Segmentation fault"s that
seem to be caused by a kernel. They can be avoided by:
1) Disabling highpage
2) Using flush_cache_mm in flush_cache_dup_mm
For details see OpenWrt ticket #2035 https://dev.openwrt.org/ticket/2035
---
--- a/arch/mips/include/asm/cacheflush.h
+++ b/arch/mips/include/asm/cacheflush.h
@@ -46,7 +46,7 @@
extern void (*flush_cache_all)(void);
extern void (*__flush_cache_all)(void);
extern void (*flush_cache_mm)(struct mm_struct *mm);
-#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0)
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
extern void (*flush_cache_range)(struct vm_area_struct *vma,
unsigned long start, unsigned long end);
extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);

View File

@ -0,0 +1,74 @@
From: Jeff Hansen <jhansen@cardaccess-inc.com>
Subject: [PATCH] no highpage
On ASUS WL-500gP there are many unexpected "Segmentation fault"s that
seem to be caused by a kernel. They can be avoided by:
1) Disabling highpage
2) Using flush_cache_mm in flush_cache_dup_mm
For details see OpenWrt ticket #2035 https://dev.openwrt.org/ticket/2035
---
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -71,6 +71,7 @@ static inline unsigned int page_size_ftl
#endif /* CONFIG_MIPS_HUGE_TLB_SUPPORT */
#include <linux/pfn.h>
+#include <asm/cpu-features.h>
extern void build_clear_page(void);
extern void build_copy_page(void);
@@ -110,11 +111,16 @@ static inline void clear_user_page(void
flush_data_cache_page((unsigned long)addr);
}
-struct vm_area_struct;
-extern void copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr, struct vm_area_struct *vma);
+static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+ struct page *to)
+{
+ extern void (*flush_data_cache_page)(unsigned long addr);
-#define __HAVE_ARCH_COPY_USER_HIGHPAGE
+ copy_page(vto, vfrom);
+ if (!cpu_has_ic_fills_f_dc ||
+ pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
+ flush_data_cache_page((unsigned long)vto);
+}
/*
* These are used to make use of C type-checking..
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -168,30 +168,6 @@ void kunmap_coherent(void)
preempt_enable();
}
-void copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr, struct vm_area_struct *vma)
-{
- void *vfrom, *vto;
-
- vto = kmap_atomic(to);
- if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- page_mapcount(from) && !Page_dcache_dirty(from)) {
- vfrom = kmap_coherent(from, vaddr);
- copy_page(vto, vfrom);
- kunmap_coherent();
- } else {
- vfrom = kmap_atomic(from);
- copy_page(vto, vfrom);
- kunmap_atomic(vfrom);
- }
- if ((!cpu_has_ic_fills_f_dc) ||
- pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
- flush_data_cache_page((unsigned long)vto);
- kunmap_atomic(vto);
- /* Make sure this page is cleared on other CPU's too before using it */
- smp_wmb();
-}
-
void copy_to_user_page(struct vm_area_struct *vma,
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)

View File

@ -0,0 +1,185 @@
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -141,6 +141,7 @@ struct bcm47xx_board_type_list2 bcm47xx_
{{BCM47XX_BOARD_LINKSYS_WRT300NV11, "Linksys WRT300N V1.1"}, "WRT300N", "1.1"},
{{BCM47XX_BOARD_LINKSYS_WRT310NV1, "Linksys WRT310N V1"}, "WRT310N", "1.0"},
{{BCM47XX_BOARD_LINKSYS_WRT310NV2, "Linksys WRT310N V2"}, "WRT310N", "2.0"},
+ {{BCM47XX_BOARD_LINKSYS_WRT320N_V1, "Linksys WRT320N V1"}, "WRT320N", "1.0"},
{{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"},
{{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"},
{{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"},
@@ -161,9 +162,12 @@ struct bcm47xx_board_type_list1 bcm47xx_
{{BCM47XX_BOARD_LUXUL_XWR_600_V1, "Luxul XWR-600 V1"}, "luxul_xwr600_v1"},
{{BCM47XX_BOARD_LUXUL_XWR_1750_V1, "Luxul XWR-1750 V1"}, "luxul_xwr1750_v1"},
{{BCM47XX_BOARD_NETGEAR_R6200_V1, "Netgear R6200 V1"}, "U12H192T00_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_R6300_V1, "Netgear R6300 V1"}, "U12H218T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WGR614_V10, "Netgear WGR614 V10"}, "U12H139T01_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WN2500RP_V1, "Netgear WN2500RP V1"}, "U12H197T00_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WN2500RP_V2, "Netgear WN2500RP V2"}, "U12H294T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNDR3300, "Netgear WNDR3300"}, "U12H093T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNDR3400V1, "Netgear WNDR3400 V1"}, "U12H155T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNDR3400V2, "Netgear WNDR3400 V2"}, "U12H187T00_NETGEAR"},
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -27,6 +27,12 @@
/* Asus */
static const struct gpio_keys_button
+bcm47xx_buttons_asus_rtn10u[] __initconst = {
+ BCM47XX_GPIO_KEY(20, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(21, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
bcm47xx_buttons_asus_rtn12[] __initconst = {
BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
BCM47XX_GPIO_KEY(1, KEY_RESTART),
@@ -277,6 +283,18 @@ bcm47xx_buttons_linksys_wrt310nv1[] __in
};
static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt310n_v2[] __initconst = {
+ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt320n_v1[] __initconst = {
+ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(8, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
bcm47xx_buttons_linksys_wrt54g3gv2[] __initconst = {
BCM47XX_GPIO_KEY(5, KEY_WIMAX),
BCM47XX_GPIO_KEY(6, KEY_RESTART),
@@ -392,6 +410,17 @@ bcm47xx_buttons_netgear_r6200_v1[] __ini
};
static const struct gpio_keys_button
+bcm47xx_buttons_netgear_r6300_v1[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_netgear_wn2500rp_v1[] __initconst = {
+ BCM47XX_GPIO_KEY(12, KEY_RESTART),
+ BCM47XX_GPIO_KEY(31, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
bcm47xx_buttons_netgear_wndr3400v1[] __initconst = {
BCM47XX_GPIO_KEY(4, KEY_RESTART),
BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
@@ -478,6 +507,9 @@ int __init bcm47xx_buttons_register(void
int err;
switch (board) {
+ case BCM47XX_BOARD_ASUS_RTN10U:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn10u);
+ break;
case BCM47XX_BOARD_ASUS_RTN12:
err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn12);
break;
@@ -608,6 +640,12 @@ int __init bcm47xx_buttons_register(void
case BCM47XX_BOARD_LINKSYS_WRT310NV1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1);
break;
+ case BCM47XX_BOARD_LINKSYS_WRT310NV2:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310n_v2);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT320N_V1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt320n_v1);
+ break;
case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g3gv2);
break;
@@ -674,6 +712,12 @@ int __init bcm47xx_buttons_register(void
case BCM47XX_BOARD_NETGEAR_R6200_V1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_r6200_v1);
break;
+ case BCM47XX_BOARD_NETGEAR_R6300_V1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_r6300_v1);
+ break;
+ case BCM47XX_BOARD_NETGEAR_WN2500RP_V1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wn2500rp_v1);
+ break;
case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3400v1);
break;
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -72,6 +72,7 @@ enum bcm47xx_board {
BCM47XX_BOARD_LINKSYS_WRT300NV11,
BCM47XX_BOARD_LINKSYS_WRT310NV1,
BCM47XX_BOARD_LINKSYS_WRT310NV2,
+ BCM47XX_BOARD_LINKSYS_WRT320N_V1,
BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101,
BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467,
@@ -99,9 +100,12 @@ enum bcm47xx_board {
BCM47XX_BOARD_MOTOROLA_WR850GV2V3,
BCM47XX_BOARD_NETGEAR_R6200_V1,
+ BCM47XX_BOARD_NETGEAR_R6300_V1,
BCM47XX_BOARD_NETGEAR_WGR614V8,
BCM47XX_BOARD_NETGEAR_WGR614V9,
BCM47XX_BOARD_NETGEAR_WGR614_V10,
+ BCM47XX_BOARD_NETGEAR_WN2500RP_V1,
+ BCM47XX_BOARD_NETGEAR_WN2500RP_V2,
BCM47XX_BOARD_NETGEAR_WNDR3300,
BCM47XX_BOARD_NETGEAR_WNDR3400V1,
BCM47XX_BOARD_NETGEAR_WNDR3400V2,
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -30,6 +30,14 @@
/* Asus */
static const struct gpio_led
+bcm47xx_leds_asus_rtn10u[] __initconst = {
+ BCM47XX_GPIO_LED(5, "green", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(6, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(7, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(8, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
bcm47xx_leds_asus_rtn12[] __initconst = {
BCM47XX_GPIO_LED(2, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
BCM47XX_GPIO_LED(7, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
@@ -314,6 +322,13 @@ bcm47xx_leds_linksys_wrt310nv1[] __initc
};
static const struct gpio_led
+bcm47xx_leds_linksys_wrt320n_v1[] __initconst = {
+ BCM47XX_GPIO_LED(1, "blue", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(2, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(4, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
bcm47xx_leds_linksys_wrt54g_generic[] __initconst = {
BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
@@ -556,6 +571,9 @@ void __init bcm47xx_leds_register(void)
enum bcm47xx_board board = bcm47xx_board_get();
switch (board) {
+ case BCM47XX_BOARD_ASUS_RTN10U:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_rtn10u);
+ break;
case BCM47XX_BOARD_ASUS_RTN12:
bcm47xx_set_pdata(bcm47xx_leds_asus_rtn12);
break;
@@ -689,6 +707,9 @@ void __init bcm47xx_leds_register(void)
case BCM47XX_BOARD_LINKSYS_WRT310NV1:
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1);
break;
+ case BCM47XX_BOARD_LINKSYS_WRT320N_V1:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt320n_v1);
+ break;
case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2);
break;

View File

@ -0,0 +1,34 @@
--- a/drivers/mtd/parsers/bcm47xxpart.c
+++ b/drivers/mtd/parsers/bcm47xxpart.c
@@ -98,6 +98,7 @@ static int bcm47xxpart_parse(struct mtd_
int trx_num = 0; /* Number of found TRX partitions */
int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
int err;
+ bool found_nvram = false;
/*
* Some really old flashes (like AT45DB*) had smaller erasesize-s, but
@@ -279,12 +280,23 @@ static int bcm47xxpart_parse(struct mtd_
if (buf[0] == NVRAM_HEADER) {
bcm47xxpart_add_part(&parts[curr_part++], "nvram",
master->size - blocksize, 0);
+ found_nvram = true;
break;
}
}
kfree(buf);
+ if (!found_nvram) {
+ pr_err("can not find a nvram partition reserve last block\n");
+ bcm47xxpart_add_part(&parts[curr_part++], "nvram_guess",
+ master->size - blocksize * 2, MTD_WRITEABLE);
+ for (i = 0; i < curr_part; i++) {
+ if (parts[i].size + parts[i].offset == master->size)
+ parts[i].offset -= blocksize * 2;
+ }
+ }
+
/*
* Assume that partitions end at the beginning of the one they are
* followed by.

View File

@ -0,0 +1,41 @@
From: b.sander
Subject: [PATCH] pci: IDE fix
These are standard probing messages when using pdc202xx_old:
pdc202xx_old 0000:00:01.0: IDE controller (0x105a:0x0d30 rev 0x02)
PCI: Enabling device 0000:00:01.0 (0004 -> 0007)
PCI: Fixing up device 0000:00:01.0
0000:00:01.0: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
0000:00:01.0: FORCING BURST BIT 0x00->0x01 ACTIVE
pdc202xx_old 0000:00:01.0: 100% native mode on irq 6
With the default MAX_HWIFS value after above we get:
ide2: BM-DMA at 0x0400-0x0407
ide3: BM-DMA at 0x0408-0x040f
Probing IDE interface ide2...
hde: CF500, CFA DISK drive
As you can see it's ide2 + ide3 and hde.
With this patch applied we get:
ide0: BM-DMA at 0x0400-0x0407
ide1: BM-DMA at 0x0408-0x040f
Probing IDE interface ide0...
hda: CF500, CFA DISK drive
This fixes OpenWrt ticket #7061: https://dev.openwrt.org/ticket/7061
---
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -236,7 +236,11 @@ static inline void ide_std_init_ports(st
hw->io_ports.ctl_addr = ctl_addr;
}
+#if defined CONFIG_BCM47XX
+# define MAX_HWIFS 2
+#else
#define MAX_HWIFS 10
+#endif
/*
* Now for the data we need to maintain per-drive: ide_drive_t

View File

@ -0,0 +1,17 @@
When the Ethernet controller is powered down and someone wants to
access the mdio bus like the witch driver (b53) the system crashed if
PCI_D3hot was set before. This patch deactivates this power sawing mode
when a switch driver is in use.
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -4279,7 +4279,8 @@ static int tg3_power_down_prepare(struct
static void tg3_power_down(struct tg3 *tp)
{
pci_wake_from_d3(tp->pdev, tg3_flag(tp, WOL_ENABLE));
- pci_set_power_state(tp->pdev, PCI_D3hot);
+ if (!tg3_flag(tp, ROBOSWITCH))
+ pci_set_power_state(tp->pdev, PCI_D3hot);
}
static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u32 *speed, u8 *duplex)

View File

@ -0,0 +1,73 @@
From 597715c61ae75a05ab3310a34ff3857a006f0f63 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Thu, 20 Nov 2014 21:32:42 +0100
Subject: [PATCH] bcma: add table of serial flashes with smaller blocks
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
drivers/bcma/driver_chipcommon_sflash.c | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
--- a/drivers/bcma/driver_chipcommon_sflash.c
+++ b/drivers/bcma/driver_chipcommon_sflash.c
@@ -9,6 +9,7 @@
#include <linux/platform_device.h>
#include <linux/bcma/bcma.h>
+#include <bcm47xx_board.h>
static struct resource bcma_sflash_resource = {
.name = "bcma_sflash",
@@ -42,6 +43,13 @@ static const struct bcma_sflash_tbl_e bc
{ NULL },
};
+/* Some devices use smaller blocks (and have more of them) */
+static const struct bcma_sflash_tbl_e bcma_sflash_st_shrink_tbl[] = {
+ { "M25P16", 0x14, 0x1000, 512, },
+ { "M25P32", 0x15, 0x1000, 1024, },
+ { NULL },
+};
+
static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
{ "SST25WF512", 1, 0x1000, 16, },
{ "SST25VF512", 0x48, 0x1000, 16, },
@@ -85,6 +93,24 @@ static void bcma_sflash_cmd(struct bcma_
bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n");
}
+const struct bcma_sflash_tbl_e *bcma_sflash_shrink_flash(u32 id)
+{
+ enum bcm47xx_board board = bcm47xx_board_get();
+ const struct bcma_sflash_tbl_e *e;
+
+ switch (board) {
+ case BCM47XX_BOARD_NETGEAR_WGR614_V10:
+ case BCM47XX_BOARD_NETGEAR_WNR1000_V3:
+ for (e = bcma_sflash_st_shrink_tbl; e->name; e++) {
+ if (e->id == id)
+ return e;
+ }
+ return NULL;
+ default:
+ return NULL;
+ }
+}
+
/* Initialize serial flash access */
int bcma_sflash_init(struct bcma_drv_cc *cc)
{
@@ -115,6 +141,10 @@ int bcma_sflash_init(struct bcma_drv_cc
case 0x13:
return -ENOTSUPP;
default:
+ e = bcma_sflash_shrink_flash(id);
+ if (e)
+ break;
+
for (e = bcma_sflash_st_tbl; e->name; e++) {
if (e->id == id)
break;

View File

@ -0,0 +1,305 @@
The Netgear wgt634u uses a different format for storing the
configuration. This patch is needed to read out the correct
configuration. The cfe_env.c file uses a different method way to read
out the configuration than the in kernel cfe config reader.
--- a/drivers/firmware/broadcom/Makefile
+++ b/drivers/firmware/broadcom/Makefile
@@ -1,3 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_BCM47XX_NVRAM) += bcm47xx_nvram.o
+obj-$(CONFIG_BCM47XX_NVRAM) += bcm47xx_nvram.o cfe_env.o
obj-$(CONFIG_BCM47XX_SPROM) += bcm47xx_sprom.o
--- /dev/null
+++ b/drivers/firmware/broadcom/cfe_env.c
@@ -0,0 +1,228 @@
+/*
+ * CFE environment variable access
+ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * Copyright 2006, Felix Fietkau <nbd@nbd.name>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <asm/io.h>
+#include <linux/uaccess.h>
+
+#define NVRAM_SIZE (0x1ff0)
+static char _nvdata[NVRAM_SIZE];
+static char _valuestr[256];
+
+/*
+ * TLV types. These codes are used in the "type-length-value"
+ * encoding of the items stored in the NVRAM device (flash or EEPROM)
+ *
+ * The layout of the flash/nvram is as follows:
+ *
+ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
+ *
+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
+ * The "length" field marks the length of the data section, not
+ * including the type and length fields.
+ *
+ * Environment variables are stored as follows:
+ *
+ * <type_env> <length> <flags> <name> = <value>
+ *
+ * If bit 0 (low bit) is set, the length is an 8-bit value.
+ * If bit 0 (low bit) is clear, the length is a 16-bit value
+ *
+ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still
+ * indicates the size of the length field.
+ *
+ * Flags are from the constants below:
+ *
+ */
+#define ENV_LENGTH_16BITS 0x00 /* for low bit */
+#define ENV_LENGTH_8BITS 0x01
+
+#define ENV_TYPE_USER 0x80
+
+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
+
+/*
+ * The actual TLV types we support
+ */
+
+#define ENV_TLV_TYPE_END 0x00
+#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
+
+/*
+ * Environment variable flags
+ */
+
+#define ENV_FLG_NORMAL 0x00 /* normal read/write */
+#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */
+#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */
+
+#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */
+#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */
+
+
+/* *********************************************************************
+ * _nvram_read(buffer,offset,length)
+ *
+ * Read data from the NVRAM device
+ *
+ * Input parameters:
+ * buffer - destination buffer
+ * offset - offset of data to read
+ * length - number of bytes to read
+ *
+ * Return value:
+ * number of bytes read, or <0 if error occured
+ ********************************************************************* */
+static int
+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
+{
+ int i;
+ if (offset > NVRAM_SIZE)
+ return -1;
+
+ for ( i = 0; i < length; i++) {
+ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
+ }
+ return length;
+}
+
+
+static char*
+_strnchr(const char *dest,int c,size_t cnt)
+{
+ while (*dest && (cnt > 0)) {
+ if (*dest == c) return (char *) dest;
+ dest++;
+ cnt--;
+ }
+ return NULL;
+}
+
+
+
+/*
+ * Core support API: Externally visible.
+ */
+
+/*
+ * Get the value of an NVRAM variable
+ * @param name name of variable to get
+ * @return value of variable or NULL if undefined
+ */
+
+char *cfe_env_get(unsigned char *nv_buf, const char *name)
+{
+ int size;
+ unsigned char *buffer;
+ unsigned char *ptr;
+ unsigned char *envval;
+ unsigned int reclen;
+ unsigned int rectype;
+ int offset;
+ int flg;
+
+ if (!strcmp(name, "nvram_type"))
+ return "cfe";
+
+ size = NVRAM_SIZE;
+ buffer = &_nvdata[0];
+
+ ptr = buffer;
+ offset = 0;
+
+ /* Read the record type and length */
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
+ goto error;
+ }
+
+ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) {
+
+ /* Adjust pointer for TLV type */
+ rectype = *(ptr);
+ offset++;
+ size--;
+
+ /*
+ * Read the length. It can be either 1 or 2 bytes
+ * depending on the code
+ */
+ if (rectype & ENV_LENGTH_8BITS) {
+ /* Read the record type and length - 8 bits */
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
+ goto error;
+ }
+ reclen = *(ptr);
+ size--;
+ offset++;
+ }
+ else {
+ /* Read the record type and length - 16 bits, MSB first */
+ if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
+ goto error;
+ }
+ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
+ size -= 2;
+ offset += 2;
+ }
+
+ if (reclen > size)
+ break; /* should not happen, bad NVRAM */
+
+ switch (rectype) {
+ case ENV_TLV_TYPE_ENV:
+ /* Read the TLV data */
+ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
+ goto error;
+ flg = *ptr++;
+ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
+ if (envval) {
+ *envval++ = '\0';
+ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
+ _valuestr[(reclen-1)-(envval-ptr)] = '\0';
+#if 0
+ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
+#endif
+ if(!strcmp(ptr, name)){
+ return _valuestr;
+ }
+ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
+ return _valuestr;
+ }
+ break;
+
+ default:
+ /* Unknown TLV type, skip it. */
+ break;
+ }
+
+ /*
+ * Advance to next TLV
+ */
+
+ size -= (int)reclen;
+ offset += reclen;
+
+ /* Read the next record type */
+ ptr = buffer;
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1)
+ goto error;
+ }
+
+error:
+ return NULL;
+
+}
+
--- a/drivers/firmware/broadcom/bcm47xx_nvram.c
+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
@@ -33,6 +33,8 @@ struct nvram_header {
static char nvram_buf[NVRAM_SPACE];
static size_t nvram_len;
static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
+static int cfe_env;
+extern char *cfe_env_get(char *nv_buf, const char *name);
static u32 find_nvram_size(void __iomem *end)
{
@@ -52,7 +54,9 @@ static u32 find_nvram_size(void __iomem
static int nvram_find_and_copy(void __iomem *iobase, u32 lim)
{
struct nvram_header __iomem *header;
+ int i;
u32 off;
+ u32 *src, *dst;
u32 size;
if (nvram_len) {
@@ -60,6 +64,26 @@ static int nvram_find_and_copy(void __io
return -EEXIST;
}
+ cfe_env = 0;
+
+ /* XXX: hack for supporting the CFE environment stuff on WGT634U */
+ if (lim >= 8 * 1024 * 1024) {
+ src = (u32 *)(iobase + 8 * 1024 * 1024 - 0x2000);
+ dst = (u32 *)nvram_buf;
+
+ if ((*src & 0xff00ff) == 0x000001) {
+ printk("early_nvram_init: WGT634U NVRAM found.\n");
+
+ for (i = 0; i < 0x1ff0; i++) {
+ if (*src == 0xFFFFFFFF)
+ break;
+ *dst++ = *src++;
+ }
+ cfe_env = 1;
+ return 0;
+ }
+ }
+
/* TODO: when nvram is on nand flash check for bad blocks first. */
off = FLASH_MIN;
while (off <= lim) {
@@ -170,6 +194,13 @@ int bcm47xx_nvram_getenv(const char *nam
if (!name)
return -EINVAL;
+ if (cfe_env) {
+ value = cfe_env_get(nvram_buf, name);
+ if (!value)
+ return -ENOENT;
+ return snprintf(val, val_len, "%s", value);
+ }
+
if (!nvram_len) {
err = nvram_init();
if (err)

View File

@ -0,0 +1,101 @@
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -37,6 +37,7 @@
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
#include <linux/bcma/bcma_soc.h>
+#include <linux/old_gpio_wdt.h>
#include <asm/bootinfo.h>
#include <asm/idle.h>
#include <asm/prom.h>
@@ -254,6 +255,33 @@ static struct fixed_phy_status bcm47xx_f
.duplex = DUPLEX_FULL,
};
+static struct gpio_wdt_platform_data gpio_wdt_data;
+
+static struct platform_device gpio_wdt_device = {
+ .name = "gpio-wdt",
+ .id = 0,
+ .dev = {
+ .platform_data = &gpio_wdt_data,
+ },
+};
+
+static int __init bcm47xx_register_gpio_watchdog(void)
+{
+ enum bcm47xx_board board = bcm47xx_board_get();
+
+ switch (board) {
+ case BCM47XX_BOARD_HUAWEI_E970:
+ pr_info("bcm47xx: detected Huawei E970 or similar, starting early gpio_wdt timer\n");
+ gpio_wdt_data.gpio = 7;
+ gpio_wdt_data.interval = HZ;
+ gpio_wdt_data.first_interval = HZ / 5;
+ return platform_device_register(&gpio_wdt_device);
+ default:
+ /* Nothing to do */
+ return 0;
+ }
+}
+
static int __init bcm47xx_register_bus_complete(void)
{
switch (bcm47xx_bus_type) {
@@ -275,6 +303,7 @@ static int __init bcm47xx_register_bus_c
bcm47xx_workarounds();
fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);
+ bcm47xx_register_gpio_watchdog();
return 0;
}
device_initcall(bcm47xx_register_bus_complete);
--- a/arch/mips/configs/bcm47xx_defconfig
+++ b/arch/mips/configs/bcm47xx_defconfig
@@ -63,6 +63,7 @@ CONFIG_HW_RANDOM=y
CONFIG_GPIO_SYSFS=y
CONFIG_WATCHDOG=y
CONFIG_BCM47XX_WDT=y
+CONFIG_GPIO_WDT=y
CONFIG_SSB_DRIVER_GIGE=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_USB=y
--- a/drivers/ssb/embedded.c
+++ b/drivers/ssb/embedded.c
@@ -34,11 +34,36 @@ int ssb_watchdog_timer_set(struct ssb_bu
}
EXPORT_SYMBOL(ssb_watchdog_timer_set);
+#ifdef CONFIG_BCM47XX
+#include <bcm47xx_board.h>
+
+static bool ssb_watchdog_supported(void)
+{
+ enum bcm47xx_board board = bcm47xx_board_get();
+
+ /* The Huawei E970 has a hardware watchdog using a GPIO */
+ switch (board) {
+ case BCM47XX_BOARD_HUAWEI_E970:
+ return false;
+ default:
+ return true;
+ }
+}
+#else
+static bool ssb_watchdog_supported(void)
+{
+ return true;
+}
+#endif
+
int ssb_watchdog_register(struct ssb_bus *bus)
{
struct bcm47xx_wdt wdt = {};
struct platform_device *pdev;
+ if (!ssb_watchdog_supported())
+ return 0;
+
if (ssb_chipco_available(&bus->chipco)) {
wdt.driver_data = &bus->chipco;
wdt.timer_set = ssb_chipco_watchdog_timer_set_wdt;

View File

@ -0,0 +1,360 @@
This generic GPIO watchdog is used on Huawei E970 (bcm47xx)
Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1655,6 +1655,15 @@ config WDT_MTX1
Hardware driver for the MTX-1 boards. This is a watchdog timer that
will reboot the machine after a 100 seconds timer expired.
+config GPIO_WDT
+ tristate "GPIO Hardware Watchdog"
+ help
+ Hardware driver for GPIO-controlled watchdogs. GPIO pin and
+ toggle interval settings are platform-specific. The driver
+ will stop toggling the GPIO (i.e. machine reboots) after a
+ 100 second timer expired and no process has written to
+ /dev/watchdog during that time.
+
config PNX833X_WDT
tristate "PNX833x Hardware Watchdog"
depends on SOC_PNX8335
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -158,6 +158,7 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt
obj-$(CONFIG_INDYDOG) += indydog.o
obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
+obj-$(CONFIG_GPIO_WDT) += old_gpio_wdt.o
obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
--- /dev/null
+++ b/drivers/watchdog/old_gpio_wdt.c
@@ -0,0 +1,301 @@
+/*
+ * Driver for GPIO-controlled Hardware Watchdogs.
+ *
+ * Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
+ *
+ * Replaces mtx1_wdt (driver for the MTX-1 Watchdog):
+ *
+ * (C) Copyright 2005 4G Systems <info@4g-systems.biz>,
+ * All Rights Reserved.
+ * http://www.4g-systems.biz
+ *
+ * (C) Copyright 2007 OpenWrt.org, Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Neither Michael Stickel nor 4G Systems admit liability nor provide
+ * warranty for any of this software. This material is provided
+ * "AS-IS" and at no charge.
+ *
+ * (c) Copyright 2005 4G Systems <info@4g-systems.biz>
+ *
+ * Release 0.01.
+ * Author: Michael Stickel michael.stickel@4g-systems.biz
+ *
+ * Release 0.02.
+ * Author: Florian Fainelli florian@openwrt.org
+ * use the Linux watchdog/timer APIs
+ *
+ * Release 0.03.
+ * Author: Mathias Adam <m.adam--linux@adamis.de>
+ * make it a generic gpio watchdog driver
+ *
+ * The Watchdog is configured to reset the MTX-1
+ * if it is not triggered for 100 seconds.
+ * It should not be triggered more often than 1.6 seconds.
+ *
+ * A timer triggers the watchdog every 5 seconds, until
+ * it is opened for the first time. After the first open
+ * it MUST be triggered every 2..95 seconds.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/timer.h>
+#include <linux/completion.h>
+#include <linux/jiffies.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/gpio.h>
+#include <linux/old_gpio_wdt.h>
+
+static int ticks = 100 * HZ;
+
+static struct {
+ struct completion stop;
+ spinlock_t lock;
+ int running;
+ struct timer_list timer;
+ int queue;
+ int default_ticks;
+ unsigned long inuse;
+ unsigned gpio;
+ unsigned int gstate;
+ int interval;
+ int first_interval;
+} gpio_wdt_device;
+
+static void gpio_wdt_trigger(struct timer_list *unused)
+{
+ spin_lock(&gpio_wdt_device.lock);
+ if (gpio_wdt_device.running && ticks > 0)
+ ticks -= gpio_wdt_device.interval;
+
+ /* toggle wdt gpio */
+ gpio_wdt_device.gstate = !gpio_wdt_device.gstate;
+ gpio_set_value(gpio_wdt_device.gpio, gpio_wdt_device.gstate);
+
+ if (gpio_wdt_device.queue && ticks > 0)
+ mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.interval);
+ else
+ complete(&gpio_wdt_device.stop);
+ spin_unlock(&gpio_wdt_device.lock);
+}
+
+static void gpio_wdt_reset(void)
+{
+ ticks = gpio_wdt_device.default_ticks;
+}
+
+
+static void gpio_wdt_start(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpio_wdt_device.lock, flags);
+ if (!gpio_wdt_device.queue) {
+ gpio_wdt_device.queue = 1;
+ gpio_wdt_device.gstate = 1;
+ gpio_set_value(gpio_wdt_device.gpio, 1);
+ mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.first_interval);
+ }
+ gpio_wdt_device.running++;
+ spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
+}
+
+static int gpio_wdt_stop(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpio_wdt_device.lock, flags);
+ if (gpio_wdt_device.queue) {
+ gpio_wdt_device.queue = 0;
+ gpio_wdt_device.gstate = 0;
+ gpio_set_value(gpio_wdt_device.gpio, 0);
+ }
+ ticks = gpio_wdt_device.default_ticks;
+ spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
+ return 0;
+}
+
+/* Filesystem functions */
+
+static int gpio_wdt_open(struct inode *inode, struct file *file)
+{
+ if (test_and_set_bit(0, &gpio_wdt_device.inuse))
+ return -EBUSY;
+ return nonseekable_open(inode, file);
+}
+
+
+static int gpio_wdt_release(struct inode *inode, struct file *file)
+{
+ clear_bit(0, &gpio_wdt_device.inuse);
+ return 0;
+}
+
+static long gpio_wdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ void __user *argp = (void __user *)arg;
+ int __user *p = (int __user *)argp;
+ unsigned int value;
+ static const struct watchdog_info ident = {
+ .options = WDIOF_CARDRESET,
+ .identity = "GPIO WDT",
+ };
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ if (copy_to_user(argp, &ident, sizeof(ident)))
+ return -EFAULT;
+ break;
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ put_user(0, p);
+ break;
+ case WDIOC_SETOPTIONS:
+ if (get_user(value, p))
+ return -EFAULT;
+ if (value & WDIOS_ENABLECARD)
+ gpio_wdt_start();
+ else if (value & WDIOS_DISABLECARD)
+ gpio_wdt_stop();
+ else
+ return -EINVAL;
+ return 0;
+ case WDIOC_KEEPALIVE:
+ gpio_wdt_reset();
+ break;
+ default:
+ return -ENOTTY;
+ }
+ return 0;
+}
+
+
+static ssize_t gpio_wdt_write(struct file *file, const char *buf,
+ size_t count, loff_t *ppos)
+{
+ if (!count)
+ return -EIO;
+ gpio_wdt_reset();
+ return count;
+}
+
+static const struct file_operations gpio_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .unlocked_ioctl = gpio_wdt_ioctl,
+ .open = gpio_wdt_open,
+ .write = gpio_wdt_write,
+ .release = gpio_wdt_release,
+};
+
+
+static struct miscdevice gpio_wdt_misc = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &gpio_wdt_fops,
+};
+
+
+static int gpio_wdt_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct gpio_wdt_platform_data *gpio_wdt_data = pdev->dev.platform_data;
+
+ gpio_wdt_device.gpio = gpio_wdt_data->gpio;
+ gpio_wdt_device.interval = gpio_wdt_data->interval;
+ gpio_wdt_device.first_interval = gpio_wdt_data->first_interval;
+ if (gpio_wdt_device.first_interval <= 0) {
+ gpio_wdt_device.first_interval = gpio_wdt_device.interval;
+ }
+
+ ret = gpio_request(gpio_wdt_device.gpio, "gpio-wdt");
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to request gpio");
+ return ret;
+ }
+
+ spin_lock_init(&gpio_wdt_device.lock);
+ init_completion(&gpio_wdt_device.stop);
+ gpio_wdt_device.queue = 0;
+ clear_bit(0, &gpio_wdt_device.inuse);
+ timer_setup(&gpio_wdt_device.timer, gpio_wdt_trigger, 0L);
+ gpio_wdt_device.default_ticks = ticks;
+
+ gpio_wdt_start();
+ dev_info(&pdev->dev, "GPIO Hardware Watchdog driver (gpio=%i interval=%i/%i)\n",
+ gpio_wdt_data->gpio, gpio_wdt_data->first_interval, gpio_wdt_data->interval);
+ return 0;
+}
+
+static int gpio_wdt_remove(struct platform_device *pdev)
+{
+ /* FIXME: do we need to lock this test ? */
+ if (gpio_wdt_device.queue) {
+ gpio_wdt_device.queue = 0;
+ wait_for_completion(&gpio_wdt_device.stop);
+ }
+
+ gpio_free(gpio_wdt_device.gpio);
+ misc_deregister(&gpio_wdt_misc);
+ return 0;
+}
+
+static struct platform_driver gpio_wdt_driver = {
+ .probe = gpio_wdt_probe,
+ .remove = gpio_wdt_remove,
+ .driver.name = "gpio-wdt",
+ .driver.owner = THIS_MODULE,
+};
+
+static int __init gpio_wdt_init(void)
+{
+ return platform_driver_register(&gpio_wdt_driver);
+}
+arch_initcall(gpio_wdt_init);
+
+/*
+ * We do wdt initialization in two steps: arch_initcall probes the wdt
+ * very early to start pinging the watchdog (misc devices are not yet
+ * available), and later module_init() just registers the misc device.
+ */
+static int gpio_wdt_init_late(void)
+{
+ int ret;
+
+ ret = misc_register(&gpio_wdt_misc);
+ if (ret < 0) {
+ pr_err("GPIO_WDT: failed to register misc device\n");
+ return ret;
+ }
+ return 0;
+}
+#ifndef MODULE
+module_init(gpio_wdt_init_late);
+#endif
+
+static void __exit gpio_wdt_exit(void)
+{
+ platform_driver_unregister(&gpio_wdt_driver);
+}
+module_exit(gpio_wdt_exit);
+
+MODULE_AUTHOR("Michael Stickel, Florian Fainelli, Mathias Adam");
+MODULE_DESCRIPTION("Driver for GPIO hardware watchdogs");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:gpio-wdt");
--- /dev/null
+++ b/include/linux/old_gpio_wdt.h
@@ -0,0 +1,21 @@
+/*
+ * Definitions for the GPIO watchdog driver
+ *
+ * Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _GPIO_WDT_H_
+#define _GPIO_WDT_H_
+
+struct gpio_wdt_platform_data {
+ int gpio; /* GPIO line number */
+ int interval; /* watchdog reset interval in system ticks */
+ int first_interval; /* first wd reset interval in system ticks */
+};
+
+#endif /* _GPIO_WDT_H_ */

View File

@ -0,0 +1,30 @@
From 5c81397a0147ea59c778d1de14ef54e2268221f6 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Wed, 8 Apr 2015 06:58:11 +0200
Subject: [PATCH] ssb: reject PCI writes setting CardBus bridge resources
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
If SoC has a CardBus we can set resources of device at slot 1 only. It's
impossigle to set bridge resources as it simply overwrites device 1
configuration and usually results in Data bus error-s.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
drivers/ssb/driver_pcicore.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -164,6 +164,10 @@ static int ssb_extpci_write_config(struc
WARN_ON(!pc->hostmode);
if (unlikely(len != 1 && len != 2 && len != 4))
goto out;
+ /* CardBus SoCs allow configuring dev 1 resources only */
+ if (extpci_core->cardbusmode && dev != 1 &&
+ off >= PCI_BASE_ADDRESS_0 && off <= PCI_BASE_ADDRESS_5)
+ goto out;
addr = get_cfgspace_addr(pc, bus, dev, func, off);
if (unlikely(!addr))
goto out;

View File

@ -0,0 +1,46 @@
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -921,6 +921,8 @@ static unsigned int yenta_probe_irq(stru
* Probe for usable interrupts using the force
* register to generate bogus card status events.
*/
+#ifndef CONFIG_BCM47XX
+ /* WRT54G3G does not like this */
cb_writel(socket, CB_SOCKET_EVENT, -1);
cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
reg = exca_readb(socket, I365_CSCINT);
@@ -936,6 +938,7 @@ static unsigned int yenta_probe_irq(stru
}
cb_writel(socket, CB_SOCKET_MASK, 0);
exca_writeb(socket, I365_CSCINT, reg);
+#endif
mask = probe_irq_mask(val) & 0xffff;
@@ -1020,6 +1023,10 @@ static void yenta_get_socket_capabilitie
else
socket->socket.irq_mask = 0;
+ /* irq mask probing is broken for the WRT54G3G */
+ if (socket->socket.irq_mask == 0)
+ socket->socket.irq_mask = 0x6f8;
+
dev_info(&socket->dev->dev, "ISA IRQ mask 0x%04x, PCI irq %d\n",
socket->socket.irq_mask, socket->cb_irq);
}
@@ -1251,6 +1258,15 @@ static int yenta_probe(struct pci_dev *d
dev_info(&dev->dev, "Socket status: %08x\n",
cb_readl(socket, CB_SOCKET_STATE));
+ /* Generate an interrupt on card insert/remove */
+ config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
+
+ /* Set up Multifunction Routing Status Register */
+ config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
+
+ /* Switch interrupts to parallelized */
+ config_writeb(socket, 0x92, 0x64);
+
yenta_fixup_parent_bridge(dev->subordinate);
/* Register it with the pcmcia layer.. */

View File

@ -0,0 +1,11 @@
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -390,7 +390,7 @@ static void ssb_pcicore_init_hostmode(st
set_io_port_base(ssb_pcicore_controller.io_map_base);
/* Give some time to the PCI controller to configure itself with the new
* values. Not waiting at this point causes crashes of the machine. */
- mdelay(10);
+ mdelay(300);
register_pci_controller(&ssb_pcicore_controller);
}

View File

@ -0,0 +1,23 @@
--- a/drivers/firmware/broadcom/bcm47xx_nvram.c
+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
@@ -30,7 +30,8 @@ struct nvram_header {
u32 config_ncdl; /* ncdl values for memc */
};
-static char nvram_buf[NVRAM_SPACE];
+char nvram_buf[NVRAM_SPACE];
+EXPORT_SYMBOL(nvram_buf);
static size_t nvram_len;
static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
static int cfe_env;
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -62,6 +62,8 @@ void (*_dma_cache_wback_inv)(unsigned lo
void (*_dma_cache_wback)(unsigned long start, unsigned long size);
void (*_dma_cache_inv)(unsigned long start, unsigned long size);
+EXPORT_SYMBOL(_dma_cache_inv);
+
#endif /* CONFIG_DMA_NONCOHERENT */
/*