gemini: fix hard disk boot on D-Link devices

Since the D-Link devices boot from hard disk we need to
add the following changes to Gemini:

- Supply a bootarg in the device tree so we can boot from
  the right partition (/dev/sda4 on DNS-313)
- Disable forced command line in config so the kernel picks
  up the right bootargs from the device tree
- Enable EXT4 in the config as this is used for rootfs else
  we get nowhere, we cannot load this as a module because,
  well, it is supposed to be loaded from the root partition
  (chicken and egg problem).
- Enable jbd2 and mbcache (needed by ext4)

Also clean out the premature attempts to dynamically
modify the command line in the Image makefile: we should
pass this with the device tree bootargs instead, it works
much better.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Roman Yeryomin <roman@advem.lv>
This commit is contained in:
Roman Yeryomin 2018-05-04 18:18:51 +03:00 committed by John Crispin
parent 2c35bcffd0
commit ce93b05bf1
3 changed files with 49 additions and 8 deletions

View File

@ -56,7 +56,6 @@ CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_MMIO=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="console=ttyS0,19200n8"
CONFIG_CMDLINE_FORCE=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_GEMINI=y
CONFIG_COMPACTION=y
@ -153,6 +152,7 @@ CONFIG_ELF_CORE=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_EXPERT is not set
CONFIG_EXPORTFS=y
CONFIG_EXT4_FS=y
CONFIG_FARADAY_FTINTC010=y
CONFIG_FHANDLE=y
CONFIG_FIRMWARE_IN_KERNEL=y
@ -160,6 +160,7 @@ CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
# CONFIG_FPE_FASTFPE is not set
# CONFIG_FPE_NWFPE is not set
CONFIG_FS_MBCACHE=y
CONFIG_FS_POSIX_ACL=y
CONFIG_FTTMR010_TIMER=y
CONFIG_FTWDT010_WATCHDOG=y
@ -255,6 +256,7 @@ CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
# CONFIG_ISDN is not set
CONFIG_JBD2=y
CONFIG_KALLSYMS=y
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set

View File

@ -70,24 +70,20 @@ endef
# of devices out of the box (former NAS42x0 IcyBox defaults)
GEMINI_NAS_PACKAGES:=kmod-md-mod kmod-md-linear kmod-md-multipath \
kmod-md-raid0 kmod-md-raid1 kmod-md-raid10 kmod-md-raid456 \
kmod-fs-btrfs kmod-fs-cifs kmod-fs-ext4 kmod-fs-nfs \
kmod-fs-btrfs kmod-fs-cifs kmod-fs-nfs \
kmod-fs-nfsd kmod-fs-ntfs kmod-fs-reiserfs kmod-fs-vfat \
kmod-nls-utf8 kmod-usb-storage-extras \
samba36-server mdadm cfdisk fdisk e2fsprogs badblocks
DIR685_CMDLINE:=-console=ttyS0,19200n8 root=/dev/sda1 rw rootwait
define Device/dlink-dir-685
DEVICE_TITLE := D-Link DIR-685 Xtreme N Storage Router
CMDLINE := $(DIR685_CMDLINE)
DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES) \
kmod-switch-rtl8366rb swconfig
endef
TARGET_DEVICES += dlink-dir-685
DNS313_CMDLINE:=-console=ttyS0,19200n8 root=/dev/sda4 rw rootwait
define Device/dlink-dns-313
DEVICE_TITLE := D-Link DNS-313 1-Bay Network Storage Enclosure
CMDLINE := $(DNS313_CMDLINE)
DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES)
IMAGES += dns313-image
IMAGE/dns313-image := dns313-images
@ -108,10 +104,8 @@ define Device/rut1xx
endef
TARGET_DEVICES += rut1xx
SQ201_CMDLINE:=-console=ttyS0,115200n8
define Device/sq201
DEVICE_TITLE := ITian Square One SQ201
CMDLINE := $(SQ201_CMDLINE)
DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES) rt61-pci-firmware
endef
TARGET_DEVICES += sq201

View File

@ -0,0 +1,45 @@
From 5813b729eb9fe91fcf895a5c2f30bf34fbd46379 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Wed, 2 May 2018 09:17:25 +0200
Subject: [PATCH] ARM: dts: Fix bootargs for Gemini D-Link devices
These machines need to be booted from very specific harddisk
partitions (as the D-Link DNS-313 boots specifically from
partition 4). Add the proper bootargs so that everything works
smoothly.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/boot/dts/gemini-dlink-dir-685.dts | 3 ++-
arch/arm/boot/dts/gemini-dlink-dns-313.dts | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
index a39914dece98..840f4a32f37c 100644
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
@@ -20,7 +20,8 @@
};
chosen {
- stdout-path = "uart0:115200n8";
+ bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait";
+ stdout-path = "uart0:19200n8";
};
gpio_keys {
diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
index 4904f1251671..685719a0b8c0 100644
--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
@@ -26,6 +26,7 @@
};
chosen {
+ bootargs = "console=ttyS0,19200n8 root=/dev/sda4 rw rootwait";
stdout-path = "uart0:19200n8";
};
--
2.14.3