mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-06-15 11:43:54 +02:00
ramips: add support for TOZED ZLT S12 PRO
The TOZED ZLT S12 PRO is an AC1200 router featuring 4 Ethernet ports with a TOZED TL70-C cellular modem which supports the NCM mode. The stock firmware does SIM locking on the modem by stopping dialing when a different PLMN is detected. This is not the case on OpenWrt. Specifications: - CPU: MediaTek MT7621AT - RAM: 256MB DDR3 - NOR Flash: MX25L12833FM2I 16MB SPI Flash - Wi-Fi 2.4Ghz: MT7603E - Wi-Fi 5Ghz: MT7612E - Switch: MT7530 4x 1Gbit Ports - WWAN: Unisoc SL8563 based TOZED TL70-C LTE CAT6 cellular modem - USB: 1x optional USB2.0 external port - Switches/Buttons: WPS, Reset, Power Switch - LEDs: Power, Wi-Fi, Data, Signal 1-5, Phone Installation and TFTP Recovery: - Connect to serial console. - Boot initramfs image by choosing option 1 when U-Boot prompts. - Install sysupgrade image via OpenWrt. Serial Pins: Located at the bottom right when looking from the front, right under the Reset/WPS buttons. The pinout from the left is: - RX - GND - TX Baudrate is 115200. When connecting from a powered off state, disconnect RX as it blocks the boot process. Link: http://www.sztozed.com/en/contents/58/84.html Co-developed-by: Andre Cruz <me@1conan.com> Signed-off-by: Andre Cruz <me@1conan.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
This commit is contained in:
Arınç ÜNAL
Hauke Mehrtens
parent
c42847989e
commit
ce1f9fa625
245
target/linux/ramips/dts/mt7621_tozed_zlt-s12-pro.dts
Normal file
245
target/linux/ramips/dts/mt7621_tozed_zlt-s12-pro.dts
Normal file
|
|
@ -0,0 +1,245 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
compatible = "tozed,zlt-s12-pro", "mediatek,mt7621-soc";
|
||||
model = "TOZED ZLT S12 PRO";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_blue;
|
||||
led-failsafe = &led_power_yellow;
|
||||
led-running = &led_power_blue;
|
||||
led-upgrade = &led_power_blue;
|
||||
label-mac-device = &wifi1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-modem-blue {
|
||||
label = "blue:modem";
|
||||
gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-modem-red {
|
||||
label = "red:modem";
|
||||
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_blue: led-power-blue {
|
||||
label = "blue:power";
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_yellow: led-power-yellow {
|
||||
label = "yellow:power";
|
||||
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-wifi {
|
||||
label = "blue:wifi";
|
||||
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
led-signal1 {
|
||||
label = "blue:signal1";
|
||||
gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-signal2 {
|
||||
label = "blue:signal2";
|
||||
gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-signal3 {
|
||||
label = "blue:signal3";
|
||||
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-signal4 {
|
||||
label = "blue:signal4";
|
||||
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-signal5 {
|
||||
label = "blue:signal5";
|
||||
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-phone {
|
||||
label = "blue:phone";
|
||||
gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
button-reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
button-rfkill {
|
||||
label = "rfkill";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
};
|
||||
|
||||
button-wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_export {
|
||||
compatible = "gpio-export";
|
||||
|
||||
lt72_ant0 {
|
||||
gpio-export,name = "lt72_ant0";
|
||||
gpio-export,input = <0>;
|
||||
gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
lt72_ant1 {
|
||||
gpio-export,name = "lt72_ant1";
|
||||
gpio-export,input = <0>;
|
||||
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
lt72_power {
|
||||
gpio-export,name = "lt72_power";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x8000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
// Stock config partition
|
||||
partition@38000 {
|
||||
label = "tozed-conf";
|
||||
reg = <0x38000 0x8000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_factory_e000: macaddr@e000 {
|
||||
reg = <0xe000 0x6>;
|
||||
};
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0xfb0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi0: mt76@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi1: mt76@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0000>;
|
||||
ieee80211-freq-limit = <2400000 2500000>;
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
nvmem-cells = <&macaddr_factory_e000>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@0 {
|
||||
status = "okay";
|
||||
label = "wan";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
status = "okay";
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
status = "okay";
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
status = "okay";
|
||||
label = "lan1";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "wdt", "rgmii2", "jtag", "uart3";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
|
@ -2135,6 +2135,16 @@ define Device/totolink_x5000r
|
|||
endef
|
||||
TARGET_DEVICES += totolink_x5000r
|
||||
|
||||
define Device/tozed_zlt-s12-pro
|
||||
$(Device/dsa-migration)
|
||||
$(Device/uimage-lzma-loader)
|
||||
IMAGE_SIZE := 16064k
|
||||
DEVICE_VENDOR := TOZED
|
||||
DEVICE_MODEL := ZLT S12 PRO
|
||||
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 comgt-ncm -uboot-envtools
|
||||
endef
|
||||
TARGET_DEVICES += tozed_zlt-s12-pro
|
||||
|
||||
define Device/tplink_archer-ax23-v1
|
||||
$(Device/dsa-migration)
|
||||
$(Device/tplink-safeloader)
|
||||
|
|
|
|||
|
|
@ -108,6 +108,10 @@ ramips_setup_interfaces()
|
|||
mikrotik,routerboard-760igs)
|
||||
ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan sfp"
|
||||
;;
|
||||
tozed,zlt-s12-pro)
|
||||
ucidef_set_interface "wwan" device "/dev/ttyUSB0" protocol "ncm"
|
||||
uci add_list firewall.@zone[1].network='wwan'
|
||||
;;
|
||||
tplink,deco-m4r-v4)
|
||||
ucidef_set_interfaces_lan_wan "eth1" "eth0"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -12,6 +12,9 @@ mikrotik,routerboard-760igs)
|
|||
telco-electronics,x1)
|
||||
ucidef_add_gpio_switch "modem_reset" "Modem Reset" "496"
|
||||
;;
|
||||
tozed,zlt-s12-pro)
|
||||
ucidef_add_gpio_switch "lt72_power" "Power LTE modem" "lt72_power" "1"
|
||||
;;
|
||||
tplink,eap235-wall-v1|\
|
||||
tplink,eap615-wall-v1)
|
||||
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "poe-passthrough"
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user