filogic: add support for Netgear WAX220
Hardware
--------
SOC: MediaTek MT7986
RAM: 1024MB DDR3
FLASH: 128MB SPI-NAND (Winbond)
WIFI: Mediatek MT7986 DBDC 802.11ax 2.4/5 GHz
ETH: Realtek RTL8221B-VB-CG 2.5 N-Base-T PHY with PoE
UART: 3V3 115200 8N1 (Pinout silkscreened / Do not connect VCC)
Installation
------------
1. Download the OpenWrt initramfs image. Copy the image to a TFTP server
2. Connect the TFTP server to the WAX220. Conect to the serial console,
interrupt the autoboot process by pressing '0' when prompted.
3. Download & Boot the OpenWrt initramfs image.
$ setenv ipaddr 192.168.2.1
$ setenv serverip 192.168.2.2
$ tftpboot openwrt.bin
$ bootm
4. Wait for OpenWrt to boot. Transfer the sysupgrade image to the device
using scp and install using sysupgrade.
$ sysupgrade -n <path-to-sysupgrade.bin>
Signed-off-by: Flole Systems <flole@flole.de>
Signed-off-by: Stefan Agner <stefan@agner.ch>
(cherry picked from commit 984786a2f7)
This commit is contained in:
Flole Systems
Stefan Agner
parent
106c83a1ea
commit
cd17d8df2a
|
|
@ -37,6 +37,9 @@ bananapi,bpi-r3)
|
|||
;;
|
||||
esac
|
||||
;;
|
||||
netgear,wax220)
|
||||
ubootenv_add_uci_config "/dev/mtd5" "0x0" "0x20000" "0x20000"
|
||||
;;
|
||||
xiaomi,redmi-router-ax6000-stock)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x20000"
|
||||
ubootenv_add_uci_sys_config "/dev/mtd2" "0x0" "0x10000" "0x20000"
|
||||
|
|
|
|||
|
|
@ -0,0 +1,288 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
#include "mt7986b.dtsi"
|
||||
|
||||
/ {
|
||||
#address-cells = <0x2>;
|
||||
#size-cells = <0x2>;
|
||||
model = "Netgear WAX220";
|
||||
compatible = "netgear,wax220", "mediatek,mt7986b-spim-snand-rfb";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
led-boot = &led_power_blue;
|
||||
led-failsafe = &led_power_amber;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_amber;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
label = "reset";
|
||||
};
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
wlan5g_green {
|
||||
gpios = <&pio 12 GPIO_ACTIVE_LOW>;
|
||||
label = "green:wlan5g";
|
||||
};
|
||||
|
||||
led_power_amber: power_amber {
|
||||
gpios = <&pio 15 GPIO_ACTIVE_LOW>;
|
||||
label = "amber:power";
|
||||
};
|
||||
|
||||
wlan2g_green {
|
||||
gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
|
||||
label = "green:wlan2g";
|
||||
};
|
||||
|
||||
led_power_blue: power_blue {
|
||||
gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
|
||||
label = "blue:power";
|
||||
};
|
||||
|
||||
led_power_green: power_green {
|
||||
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
|
||||
label = "green:power";
|
||||
};
|
||||
|
||||
wlan2g_blue {
|
||||
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
||||
label = "blue:wlan2g";
|
||||
};
|
||||
|
||||
lan_green {
|
||||
gpios = <&pio 22 GPIO_ACTIVE_HIGH>;
|
||||
label = "green:lan";
|
||||
};
|
||||
|
||||
lan_amber {
|
||||
gpios = <&pio 13 GPIO_ACTIVE_LOW>;
|
||||
label = "amber:lan";
|
||||
};
|
||||
|
||||
wlan5g_blue {
|
||||
gpios = <&pio 2 GPIO_ACTIVE_LOW>;
|
||||
label = "blue:wlan5g";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&crypto {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
|
||||
gmac1: mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-handle = <&phy6>;
|
||||
phy-mode = "2500base-x";
|
||||
};
|
||||
|
||||
mdio: mdio-bus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
phy6: ethernet-phy@6 {
|
||||
reg = <6>;
|
||||
reset-assert-us = <100000>;
|
||||
reset-deassert-us = <100000>;
|
||||
reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&pio {
|
||||
spi_flash_pins: spi-flash-pins-33-to-38 {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi0", "spi0_wp_hold";
|
||||
};
|
||||
conf-pu {
|
||||
pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
|
||||
drive-strength = <8>;
|
||||
mediatek,pull-up-adv = <0>; /* bias-disable */
|
||||
};
|
||||
conf-pd {
|
||||
pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
|
||||
drive-strength = <8>;
|
||||
mediatek,pull-down-adv = <0>; /* bias-disable */
|
||||
};
|
||||
};
|
||||
|
||||
wf_2g_5g_pins: wf_2g_5g-pins {
|
||||
mux {
|
||||
function = "wifi";
|
||||
groups = "wf_2g", "wf_5g";
|
||||
};
|
||||
conf {
|
||||
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
||||
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
||||
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
||||
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
||||
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
||||
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
||||
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
||||
drive-strength = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
wf_dbdc_pins: wf-dbdc-pins {
|
||||
mux {
|
||||
function = "wifi";
|
||||
groups = "wf_dbdc";
|
||||
};
|
||||
conf {
|
||||
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
||||
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
||||
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
||||
"WF0_TOP_CLK", "WF0_TOP_DATA";
|
||||
drive-strength = <4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi_flash_pins>;
|
||||
status = "okay";
|
||||
|
||||
spi_nand_flash: flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spi-nand";
|
||||
reg = <0>;
|
||||
|
||||
spi-max-frequency = <20000000>;
|
||||
spi-tx-buswidth = <4>;
|
||||
spi-rx-buswidth = <4>;
|
||||
|
||||
partitions: partitions {
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x1>;
|
||||
compatible = "fixed-partitions";
|
||||
|
||||
partition@5fc0000 {
|
||||
label = "Traffic";
|
||||
reg = <0x5fc0000 0x200000>;
|
||||
};
|
||||
|
||||
partition@63c0000 {
|
||||
label = "NTGRcryptD";
|
||||
reg = <0x63c0000 0x500000>;
|
||||
};
|
||||
|
||||
partition@580000 {
|
||||
label = "ubi";
|
||||
reg = <0x580000 0x5140000>;
|
||||
};
|
||||
|
||||
factory: partition@180000 {
|
||||
label = "Factory";
|
||||
reg = <0x180000 0x200000>;
|
||||
};
|
||||
|
||||
partition@69c0000 {
|
||||
label = "User_data";
|
||||
reg = <0x69c0000 0x640000>;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x100000 0x80000>;
|
||||
};
|
||||
|
||||
partition@68c0000 {
|
||||
label = "LOG";
|
||||
reg = <0x68c0000 0x100000>;
|
||||
};
|
||||
|
||||
partition@5ac0000 {
|
||||
label = "POT";
|
||||
reg = <0x5ac0000 0x100000>;
|
||||
};
|
||||
|
||||
partition@0 {
|
||||
label = "BL2";
|
||||
read-only;
|
||||
reg = <0x0 0x100000>;
|
||||
};
|
||||
|
||||
partition@5bc0000 {
|
||||
label = "Language";
|
||||
reg = <0x5bc0000 0x400000>;
|
||||
};
|
||||
|
||||
partition@61c0000 {
|
||||
label = "Cert";
|
||||
reg = <0x61c0000 0x100000>;
|
||||
};
|
||||
|
||||
partition@380000 {
|
||||
label = "FIP";
|
||||
reg = <0x380000 0x200000>;
|
||||
};
|
||||
|
||||
partition@56c0000 {
|
||||
label = "RAE";
|
||||
reg = <0x56c0000 0x400000>;
|
||||
};
|
||||
|
||||
partition@62c0000 {
|
||||
label = "NTGRcryptK";
|
||||
reg = <0x62c0000 0x100000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&trng {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
pinctrl-names = "default", "dbdc";
|
||||
pinctrl-0 = <&wf_2g_5g_pins>;
|
||||
pinctrl-1 = <&wf_dbdc_pins>;
|
||||
|
||||
mediatek,mtd-eeprom = <&factory 0x0>;
|
||||
};
|
||||
|
|
@ -9,6 +9,11 @@ case $board in
|
|||
cudy,wr3000-v1)
|
||||
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
|
||||
;;
|
||||
netgear,wax220)
|
||||
ucidef_set_led_netdev "eth0" "LAN" "green:lan" "eth0"
|
||||
ucidef_set_led_netdev "wlan2g" "WLAN2G" "blue:wlan2g" "phy0-ap0"
|
||||
ucidef_set_led_netdev "wlan5g" "WLAN5G" "blue:wlan5g" "phy1-ap0"
|
||||
;;
|
||||
xiaomi,redmi-router-ax6000-stock|\
|
||||
xiaomi,redmi-router-ax6000-ubootmod)
|
||||
ucidef_set_led_netdev "wan" "wan" "rgb:network" "wan"
|
||||
|
|
|
|||
|
|
@ -11,6 +11,9 @@ mediatek_setup_interfaces()
|
|||
asus,tuf-ax4200)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1
|
||||
;;
|
||||
netgear,wax220)
|
||||
ucidef_set_interface_lan "eth0"
|
||||
;;
|
||||
bananapi,bpi-r3)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 sfp2" "eth1 wan"
|
||||
;;
|
||||
|
|
@ -66,6 +69,10 @@ mediatek_setup_macs()
|
|||
bananapi,bpi-r3)
|
||||
wan_mac=$(macaddr_add $(cat /sys/class/net/eth0/address) 1)
|
||||
;;
|
||||
netgear,wax220)
|
||||
lan_mac=$(mtd_get_mac_ascii u-boot-env mac)
|
||||
label_mac=$lan_mac
|
||||
;;
|
||||
qihoo,360t7)
|
||||
lan_mac=$(mtd_get_mac_ascii factory lanMac)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
|
|
|
|||
|
|
@ -32,6 +32,11 @@ case "$board" in
|
|||
[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 1) > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
netgear,wax220)
|
||||
hw_mac_addr=$(mtd_get_mac_ascii u-boot-env mac)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 3 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
qihoo,360t7)
|
||||
addr=$(mtd_get_mac_ascii factory lanMac)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
|
||||
|
|
|
|||
|
|
@ -176,6 +176,22 @@ define Device/glinet_gl-mt3000
|
|||
endef
|
||||
TARGET_DEVICES += glinet_gl-mt3000
|
||||
|
||||
define Device/netgear_wax220
|
||||
DEVICE_VENDOR := Netgear
|
||||
DEVICE_MODEL := WAX220
|
||||
DEVICE_DTS := mt7986b-netgear-wax220
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
|
||||
IMAGES := sysupgrade.bin
|
||||
KERNEL_IN_UBI := 1
|
||||
KERNEL := kernel-bin | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
||||
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += netgear_wax220
|
||||
|
||||
define Device/mediatek_mt7986a-rfb-nand
|
||||
DEVICE_VENDOR := MediaTek
|
||||
DEVICE_MODEL := MT7986 rfba AP (NAND)
|
||||
|
|
|
|||
Loading…
Reference in New Issue