ramips: add support for Asus RT-N10P V3 / RT-N11P B1 / RT-N12 VP B1

Specifications:

- MT7628NN @ 580 MHz
- 32 MB RAM
- 8 MB Flash
- 5x 10/100 Mbps Ethernet (built-in switch)
- 2.4 GHz WLAN
- 2x external, non-detachable antennas (1x for RT-N10P V3)

Flash instructions:

1. Set PC network interface to 192.168.1.75/24.
2. Connect PC to the router via LAN.
3. Turn router off, press and hold reset button, then turn it on.
4. Keep the button pressed till power led starts to blink.
5. Upload the firmware file via TFTP. (Any filename is accepted.)
6. Wait until the router reboots.

Signed-off-by: Ernst Spielmann <endspiel@disroot.org>
[fix node/property name for state_default]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Ernst Spielmann 2020-04-16 18:42:29 +00:00 committed by Adrian Schmutzler
parent a765b063ee
commit c3dc52e39a
7 changed files with 244 additions and 9 deletions

View File

@ -0,0 +1,34 @@
// SPDX-License-Identifier: GPL-2.0+
/dts-v1/;
#include "mt7628an_asus_rt-n1x.dtsi"
/ {
compatible = "asus,rt-n10p-v3", "mediatek,mt7628an-soc";
model = "Asus RT-N10P V3";
leds {
compatible = "gpio-leds";
led_power: power {
label = "rt-n10p-v3:green:power";
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
};
wlan {
label = "rt-n10p-v3:green:wlan";
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wan {
label = "rt-n10p-v3:green:wan";
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
};
lan {
label = "rt-n10p-v3:green:lan";
gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
};
};
};

View File

@ -0,0 +1,34 @@
// SPDX-License-Identifier: GPL-2.0+
/dts-v1/;
#include "mt7628an_asus_rt-n1x.dtsi"
/ {
compatible = "asus,rt-n11p-b1", "mediatek,mt7628an-soc";
model = "Asus RT-N11P B1";
leds {
compatible = "gpio-leds";
led_power: power {
label = "rt-n11p-b1:green:power";
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
};
wlan {
label = "rt-n11p-b1:green:wlan";
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wan {
label = "rt-n11p-b1:green:wan";
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
};
lan {
label = "rt-n11p-b1:green:lan";
gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
};
};
};

View File

@ -0,0 +1,34 @@
// SPDX-License-Identifier: GPL-2.0+
/dts-v1/;
#include "mt7628an_asus_rt-n1x.dtsi"
/ {
compatible = "asus,rt-n12-vp-b1", "mediatek,mt7628an-soc";
model = "Asus RT-N12 VP B1";
leds {
compatible = "gpio-leds";
led_power: power {
label = "rt-n12-vp-b1:green:power";
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
};
wlan {
label = "rt-n12-vp-b1:green:wlan";
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wan {
label = "rt-n12-vp-b1:green:wan";
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
};
lan {
label = "rt-n12-vp-b1:green:lan";
gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
};
};
};

View File

@ -0,0 +1,100 @@
// SPDX-License-Identifier: GPL-2.0+
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
chosen {
bootargs = "console=ttyS0,57600";
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
};
&esw {
mediatek,portmap = <0x2f>;
};
&wmac {
status = "okay";
};
&state_default {
gpio {
groups = "i2c", "p0led_an", "p1led_an", "refclk", "wled_an";
function = "gpio";
};
};
&usbphy {
status = "disabled";
};
&ehci {
status = "disabled";
};
&ohci {
status = "disabled";
};

View File

@ -14,6 +14,30 @@ define Device/alfa-network_awusfree1
endef endef
TARGET_DEVICES += alfa-network_awusfree1 TARGET_DEVICES += alfa-network_awusfree1
define Device/asus_rt-n10p-v3
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Asus
DEVICE_MODEL := RT-N10P
DEVICE_VARIANT := V3
endef
TARGET_DEVICES += asus_rt-n10p-v3
define Device/asus_rt-n11p-b1
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Asus
DEVICE_MODEL := RT-N11P
DEVICE_VARIANT := B1
endef
TARGET_DEVICES += asus_rt-n11p-b1
define Device/asus_rt-n12-vp-b1
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Asus
DEVICE_MODEL := RT-N12 VP
DEVICE_VARIANT := B1
endef
TARGET_DEVICES += asus_rt-n12-vp-b1
define Device/buffalo_wcr-1166ds define Device/buffalo_wcr-1166ds
IMAGE_SIZE := 7936k IMAGE_SIZE := 7936k
BUFFALO_TAG_PLATFORM := MTK BUFFALO_TAG_PLATFORM := MTK

View File

@ -20,6 +20,12 @@ case $board in
alfa-network,awusfree1) alfa-network,awusfree1)
set_wifi_led "$boardname:blue:wlan" set_wifi_led "$boardname:blue:wlan"
;; ;;
asus,rt-n10p-v3|\
asus,rt-n11p-b1|\
asus,rt-n12-vp-b1)
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0xf"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
;;
cudy,wr1000) cudy,wr1000)
ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10" ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10"
ucidef_set_led_switch "lan1" "lan1" "$boardname:blue:lan1" "switch0" "0x08" ucidef_set_led_switch "lan1" "lan1" "$boardname:blue:lan1" "switch0" "0x08"

View File

@ -26,6 +26,18 @@ ramips_setup_interfaces()
ucidef_add_switch_attr "switch0" "enable" "false" ucidef_add_switch_attr "switch0" "enable" "false"
ucidef_set_interface_lan "eth0" ucidef_set_interface_lan "eth0"
;; ;;
asus,rt-n10p-v3|\
asus,rt-n11p-b1|\
asus,rt-n12-vp-b1|\
hiwifi,hc5661a|\
mediatek,mt7628an-eval-board|\
mercury,mac1200r-v2|\
totolink,lr1200|\
wavlink,wl-wn570ha1|\
wavlink,wl-wn575a3)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
;;
buffalo,wcr-1166ds) buffalo,wcr-1166ds)
ucidef_add_switch "switch0" \ ucidef_add_switch "switch0" \
"3:lan" "4:wan" "6@eth0" "3:lan" "4:wan" "6@eth0"
@ -67,15 +79,6 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \ ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
;; ;;
hiwifi,hc5661a|\
mediatek,mt7628an-eval-board|\
mercury,mac1200r-v2|\
totolink,lr1200|\
wavlink,wl-wn570ha1|\
wavlink,wl-wn575a3)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
;;
hiwifi,hc5761a) hiwifi,hc5761a)
ucidef_add_switch "switch0" \ ucidef_add_switch "switch0" \
"0:lan" "1:lan" "4:wan" "6@eth0" "0:lan" "1:lan" "4:wan" "6@eth0"