apm821xx: add support for kernel 5.10 for testing
This patch copies over refreshed patches from 5.4. - dropped crypto patches (they got upstreamed) - dropped renesas USB 3 firmware loader (they got upstreamed) - NAND now needs extra device-properties for ECC settings. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
This commit is contained in:
Christian Lamparter
parent
ca14dfb06b
commit
be23f9818a
|
|
@ -1653,6 +1653,11 @@ XHCI_MODULES := xhci-hcd xhci-pci xhci-plat-hcd
|
|||
ifdef CONFIG_TARGET_ramips_mt7621
|
||||
XHCI_MODULES += xhci-mtk
|
||||
endif
|
||||
ifndef CONFIG_LINUX_5_4
|
||||
ifdef CONFIG_TARGET_apm821xx_nand
|
||||
XHCI_MODULES += xhci-pci-renesas
|
||||
endif
|
||||
endif
|
||||
XHCI_FILES := $(wildcard $(patsubst %,$(LINUX_DIR)/drivers/usb/host/%.ko,$(XHCI_MODULES)))
|
||||
XHCI_AUTOLOAD := $(patsubst $(LINUX_DIR)/drivers/usb/host/%.ko,%,$(XHCI_FILES))
|
||||
|
||||
|
|
@ -1667,6 +1672,7 @@ define KernelPackage/usb3
|
|||
CONFIG_USB_XHCI_PCI \
|
||||
CONFIG_USB_XHCI_PLATFORM \
|
||||
CONFIG_USB_XHCI_MTK \
|
||||
CONFIG_USB_XHCI_PCI_RENESAS \
|
||||
CONFIG_USB_XHCI_HCD_DEBUGGING=n
|
||||
FILES:= \
|
||||
$(XHCI_FILES)
|
||||
|
|
|
|||
|
|
@ -10,6 +10,7 @@ FEATURES:=fpu dt gpio ramdisk squashfs usb
|
|||
SUBTARGETS:=nand sata
|
||||
|
||||
KERNEL_PATCHVER:=5.4
|
||||
KERNEL_TESTING_PATCHVER:=5.10
|
||||
|
||||
define Target/Description
|
||||
Build images for AppliedMicro APM821xx based boards.
|
||||
|
|
|
|||
|
|
@ -0,0 +1,286 @@
|
|||
# CONFIG_40x is not set
|
||||
CONFIG_44x=y
|
||||
CONFIG_460EX=y
|
||||
CONFIG_4xx=y
|
||||
CONFIG_4xx_SOC=y
|
||||
# CONFIG_ADVANCED_OPTIONS is not set
|
||||
CONFIG_APM821xx=y
|
||||
CONFIG_APOLLO3G=y
|
||||
# CONFIG_ARCHES is not set
|
||||
CONFIG_ARCH_32BIT_OFF_T=y
|
||||
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
CONFIG_ARCH_KEEP_MEMBLOCK=y
|
||||
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
|
||||
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
|
||||
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
|
||||
CONFIG_ARCH_MMAP_RND_BITS=11
|
||||
CONFIG_ARCH_MMAP_RND_BITS_MAX=17
|
||||
CONFIG_ARCH_MMAP_RND_BITS_MIN=11
|
||||
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
|
||||
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
|
||||
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
|
||||
CONFIG_AUDIT_ARCH=y
|
||||
# CONFIG_BAMBOO is not set
|
||||
# CONFIG_BLK_DEV_INITRD is not set
|
||||
CONFIG_BLK_MQ_PCI=y
|
||||
CONFIG_BLK_PM=y
|
||||
CONFIG_BLUESTONE=y
|
||||
CONFIG_BOOKE=y
|
||||
CONFIG_BOOKE_WDT=y
|
||||
# CONFIG_CANYONLANDS is not set
|
||||
CONFIG_CLKDEV_LOOKUP=y
|
||||
CONFIG_CLONE_BACKWARDS=y
|
||||
CONFIG_CMDLINE="rootfstype=squashfs noinitrd"
|
||||
CONFIG_CMDLINE_FROM_BOOTLOADER=y
|
||||
CONFIG_COMMON_CLK=y
|
||||
CONFIG_COMPAT_32BIT_TIME=y
|
||||
CONFIG_CPU_BIG_ENDIAN=y
|
||||
CONFIG_CRC16=y
|
||||
# CONFIG_CRC32_SARWATE is not set
|
||||
CONFIG_CRC32_SLICEBY8=y
|
||||
CONFIG_CRYPTO_ACOMP2=y
|
||||
CONFIG_CRYPTO_AEAD=y
|
||||
CONFIG_CRYPTO_AEAD2=y
|
||||
CONFIG_CRYPTO_AUTHENC=y
|
||||
CONFIG_CRYPTO_CCM=y
|
||||
CONFIG_CRYPTO_CFB=y
|
||||
CONFIG_CRYPTO_CTR=y
|
||||
CONFIG_CRYPTO_DEFLATE=y
|
||||
CONFIG_CRYPTO_DEV_PPC4XX=y
|
||||
CONFIG_CRYPTO_DRBG=y
|
||||
CONFIG_CRYPTO_DRBG_HMAC=y
|
||||
CONFIG_CRYPTO_DRBG_MENU=y
|
||||
CONFIG_CRYPTO_ECB=y
|
||||
CONFIG_CRYPTO_ESSIV=y
|
||||
CONFIG_CRYPTO_GCM=y
|
||||
CONFIG_CRYPTO_GF128MUL=y
|
||||
CONFIG_CRYPTO_GHASH=y
|
||||
CONFIG_CRYPTO_HASH=y
|
||||
CONFIG_CRYPTO_HASH2=y
|
||||
CONFIG_CRYPTO_HMAC=y
|
||||
CONFIG_CRYPTO_HW=y
|
||||
CONFIG_CRYPTO_JITTERENTROPY=y
|
||||
CONFIG_CRYPTO_LIB_SHA256=y
|
||||
CONFIG_CRYPTO_LZO=y
|
||||
CONFIG_CRYPTO_MANAGER=y
|
||||
CONFIG_CRYPTO_MANAGER2=y
|
||||
CONFIG_CRYPTO_MD5_PPC=y
|
||||
CONFIG_CRYPTO_NULL=y
|
||||
CONFIG_CRYPTO_NULL2=y
|
||||
CONFIG_CRYPTO_OFB=y
|
||||
CONFIG_CRYPTO_RNG=y
|
||||
CONFIG_CRYPTO_RNG2=y
|
||||
CONFIG_CRYPTO_RNG_DEFAULT=y
|
||||
CONFIG_CRYPTO_SEQIV=y
|
||||
CONFIG_CRYPTO_SHA1_PPC=y
|
||||
CONFIG_CRYPTO_SHA256=y
|
||||
CONFIG_DATA_SHIFT=12
|
||||
CONFIG_DEBUG_MISC=y
|
||||
CONFIG_DMA_DIRECT_REMAP=y
|
||||
CONFIG_DMA_REMAP=y
|
||||
CONFIG_DTC=y
|
||||
# CONFIG_E200 is not set
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
# CONFIG_EBONY is not set
|
||||
CONFIG_EDAC_ATOMIC_SCRUB=y
|
||||
CONFIG_EDAC_SUPPORT=y
|
||||
# CONFIG_EIGER is not set
|
||||
CONFIG_EXTRA_TARGETS="uImage"
|
||||
CONFIG_FIXED_PHY=y
|
||||
CONFIG_FORCE_PCI=y
|
||||
CONFIG_FREEZER=y
|
||||
# CONFIG_FSL_LBC is not set
|
||||
CONFIG_FW_CACHE=y
|
||||
CONFIG_FW_LOADER_PAGED_BUF=y
|
||||
CONFIG_GCC_PLUGINS=y
|
||||
# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set
|
||||
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
|
||||
# CONFIG_GCC_PLUGIN_RANDSTRUCT is not set
|
||||
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set
|
||||
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set
|
||||
# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
|
||||
CONFIG_GENERIC_ALLOCATOR=y
|
||||
CONFIG_GENERIC_ATOMIC64=y
|
||||
CONFIG_GENERIC_BUG=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
||||
CONFIG_GENERIC_CPU=y
|
||||
CONFIG_GENERIC_CPU_AUTOPROBE=y
|
||||
CONFIG_GENERIC_EARLY_IOREMAP=y
|
||||
CONFIG_GENERIC_IRQ_SHOW=y
|
||||
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
|
||||
CONFIG_GENERIC_ISA_DMA=y
|
||||
CONFIG_GENERIC_MSI_IRQ=y
|
||||
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
|
||||
CONFIG_GENERIC_PCI_IOMAP=y
|
||||
CONFIG_GENERIC_SMP_IDLE_THREAD=y
|
||||
CONFIG_GENERIC_STRNCPY_FROM_USER=y
|
||||
CONFIG_GENERIC_STRNLEN_USER=y
|
||||
CONFIG_GENERIC_TIME_VSYSCALL=y
|
||||
# CONFIG_GEN_RTC is not set
|
||||
# CONFIG_GLACIER is not set
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_GENERIC=y
|
||||
CONFIG_GPIO_GENERIC_PLATFORM=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT_MAP=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_HW_RANDOM_PPC4XX=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_BOARDINFO=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_IBM_IIC=y
|
||||
CONFIG_IBM_EMAC=y
|
||||
CONFIG_IBM_EMAC_EMAC4=y
|
||||
CONFIG_IBM_EMAC_POLL_WEIGHT=32
|
||||
CONFIG_IBM_EMAC_RGMII=y
|
||||
CONFIG_IBM_EMAC_RXB=128
|
||||
CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256
|
||||
CONFIG_IBM_EMAC_TAH=y
|
||||
CONFIG_IBM_EMAC_TXB=128
|
||||
# CONFIG_ICON is not set
|
||||
CONFIG_ILLEGAL_POINTER_VALUE=0
|
||||
CONFIG_IRQCHIP=y
|
||||
CONFIG_IRQ_DOMAIN=y
|
||||
CONFIG_IRQ_DOMAIN_HIERARCHY=y
|
||||
CONFIG_IRQ_FORCED_THREADING=y
|
||||
CONFIG_IRQ_WORK=y
|
||||
CONFIG_ISA_DMA_API=y
|
||||
# CONFIG_JFFS2_FS is not set
|
||||
# CONFIG_KATMAI is not set
|
||||
CONFIG_KERNEL_START=0xc0000000
|
||||
CONFIG_LEDS_TRIGGER_MTD=y
|
||||
CONFIG_LEDS_TRIGGER_PATTERN=y
|
||||
CONFIG_LIBFDT=y
|
||||
CONFIG_LOCK_DEBUGGING_SUPPORT=y
|
||||
CONFIG_LOWMEM_SIZE=0x30000000
|
||||
CONFIG_LZO_COMPRESS=y
|
||||
CONFIG_LZO_DECOMPRESS=y
|
||||
# CONFIG_MATH_EMULATION is not set
|
||||
CONFIG_MDIO_BUS=y
|
||||
CONFIG_MDIO_DEVICE=y
|
||||
CONFIG_MEMFD_CREATE=y
|
||||
CONFIG_MIGRATION=y
|
||||
CONFIG_MMU_GATHER_PAGE_SIZE=y
|
||||
CONFIG_MODULES_USE_ELF_RELA=y
|
||||
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y
|
||||
CONFIG_MTD_CFI_ADV_OPTIONS=y
|
||||
# CONFIG_MTD_CFI_GEOMETRY is not set
|
||||
# CONFIG_MTD_SPLIT_SQUASHFS_ROOT is not set
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NEED_PER_CPU_KM=y
|
||||
CONFIG_NEED_SG_DMA_LENGTH=y
|
||||
CONFIG_NOT_COHERENT_CACHE=y
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_NO_HZ_COMMON=y
|
||||
CONFIG_NO_HZ_IDLE=y
|
||||
CONFIG_NR_IRQS=512
|
||||
CONFIG_NVMEM=y
|
||||
CONFIG_NVMEM_SYSFS=y
|
||||
CONFIG_OF=y
|
||||
CONFIG_OF_ADDRESS=y
|
||||
CONFIG_OF_EARLY_FLATTREE=y
|
||||
CONFIG_OF_FLATTREE=y
|
||||
CONFIG_OF_GPIO=y
|
||||
CONFIG_OF_IRQ=y
|
||||
CONFIG_OF_KOBJ=y
|
||||
CONFIG_OF_MDIO=y
|
||||
CONFIG_OF_NET=y
|
||||
CONFIG_OLD_SIGACTION=y
|
||||
CONFIG_OLD_SIGSUSPEND=y
|
||||
CONFIG_PACKING=y
|
||||
CONFIG_PAGE_OFFSET=0xc0000000
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCIEAER=y
|
||||
CONFIG_PCIEPORTBUS=y
|
||||
CONFIG_PCIE_PME=y
|
||||
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PCI_MSI=y
|
||||
CONFIG_PCI_MSI_ARCH_FALLBACKS=y
|
||||
CONFIG_PCI_MSI_IRQ_DOMAIN=y
|
||||
CONFIG_PGTABLE_LEVELS=2
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_PHYSICAL_START=0x00000000
|
||||
CONFIG_PHYS_64BIT=y
|
||||
CONFIG_PHYS_ADDR_T_64BIT=y
|
||||
CONFIG_PM=y
|
||||
# CONFIG_PMU_SYSFS is not set
|
||||
CONFIG_PM_AUTOSLEEP=y
|
||||
CONFIG_PM_CLK=y
|
||||
CONFIG_PM_SLEEP=y
|
||||
CONFIG_PM_WAKELOCKS=y
|
||||
CONFIG_PM_WAKELOCKS_GC=y
|
||||
CONFIG_PM_WAKELOCKS_LIMIT=100
|
||||
CONFIG_PPC=y
|
||||
CONFIG_PPC32=y
|
||||
CONFIG_PPC44x_SIMPLE=y
|
||||
CONFIG_PPC4xx_CPM=y
|
||||
CONFIG_PPC4xx_GPIO=y
|
||||
CONFIG_PPC4xx_MSI=y
|
||||
CONFIG_PPC4xx_PCI_EXPRESS=y
|
||||
# CONFIG_PPC64 is not set
|
||||
# CONFIG_PPC_47x is not set
|
||||
# CONFIG_PPC_85xx is not set
|
||||
# CONFIG_PPC_8xx is not set
|
||||
CONFIG_PPC_ADV_DEBUG_DACS=2
|
||||
CONFIG_PPC_ADV_DEBUG_DAC_RANGE=y
|
||||
CONFIG_PPC_ADV_DEBUG_DVCS=2
|
||||
CONFIG_PPC_ADV_DEBUG_IACS=4
|
||||
CONFIG_PPC_ADV_DEBUG_REGS=y
|
||||
# CONFIG_PPC_BOOK3S_6xx is not set
|
||||
CONFIG_PPC_DCR=y
|
||||
CONFIG_PPC_DCR_NATIVE=y
|
||||
# CONFIG_PPC_EARLY_DEBUG is not set
|
||||
CONFIG_PPC_FPU=y
|
||||
CONFIG_PPC_INDIRECT_PCI=y
|
||||
# CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set
|
||||
CONFIG_PPC_MMU_NOHASH=y
|
||||
CONFIG_PPC_MMU_NOHASH_32=y
|
||||
CONFIG_PPC_MSI_BITMAP=y
|
||||
CONFIG_PPC_PAGE_SHIFT=12
|
||||
# CONFIG_PPC_PTDUMP is not set
|
||||
CONFIG_PPC_UDBG_16550=y
|
||||
CONFIG_PPC_WERROR=y
|
||||
CONFIG_PTE_64BIT=y
|
||||
# CONFIG_RAINIER is not set
|
||||
CONFIG_RAS=y
|
||||
CONFIG_RATIONAL=y
|
||||
CONFIG_RSEQ=y
|
||||
# CONFIG_SAM440EP is not set
|
||||
# CONFIG_SCOM_DEBUGFS is not set
|
||||
# CONFIG_SEQUOIA is not set
|
||||
CONFIG_SERIAL_8250_EXTENDED=y
|
||||
CONFIG_SERIAL_8250_FSL=y
|
||||
CONFIG_SERIAL_8250_SHARE_IRQ=y
|
||||
CONFIG_SERIAL_MCTRL_GPIO=y
|
||||
CONFIG_SERIAL_OF_PLATFORM=y
|
||||
CONFIG_SGL_ALLOC=y
|
||||
CONFIG_SPARSE_IRQ=y
|
||||
CONFIG_SRCU=y
|
||||
CONFIG_SUSPEND=y
|
||||
CONFIG_SUSPEND_FREEZER=y
|
||||
CONFIG_SWPHY=y
|
||||
CONFIG_SYSCTL_EXCEPTION_TRACE=y
|
||||
# CONFIG_TAISHAN is not set
|
||||
CONFIG_TASK_SIZE=0xc0000000
|
||||
CONFIG_THREAD_INFO_IN_TASK=y
|
||||
CONFIG_THREAD_SHIFT=13
|
||||
CONFIG_TICK_CPU_ACCOUNTING=y
|
||||
CONFIG_TINY_SRCU=y
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_VDSO32=y
|
||||
# CONFIG_VIRTIO_MENU is not set
|
||||
# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
|
||||
# CONFIG_WARP is not set
|
||||
CONFIG_WATCHDOG_CORE=y
|
||||
# CONFIG_XILINX_SYSACE is not set
|
||||
CONFIG_XZ_DEC_BCJ=y
|
||||
CONFIG_XZ_DEC_POWERPC=y
|
||||
# CONFIG_YOSEMITE is not set
|
||||
CONFIG_ZLIB_DEFLATE=y
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
|
|
@ -233,7 +233,7 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
ndfc@1,0 {
|
||||
ndfc: ndfc@1,0 {
|
||||
compatible = "ibm,ndfc";
|
||||
reg = <00000003 00000000 00002000>;
|
||||
ccr = <0x00001000>;
|
||||
|
|
@ -241,6 +241,17 @@
|
|||
status = "disabled";
|
||||
|
||||
nand {
|
||||
/*
|
||||
* These are the same fixed "MAGIC" values
|
||||
* settings as in the drivers code.
|
||||
* They are the same for all devices that
|
||||
* have NAND.
|
||||
*/
|
||||
nand-ecc-engine = <&ndfc>;
|
||||
nand-ecc-algo = "hamming";
|
||||
nand-ecc-step-size = <256>;
|
||||
nand-ecc-strength = <1>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -47,6 +47,8 @@
|
|||
status = "okay";
|
||||
/* 32 MiB NAND Flash */
|
||||
nand {
|
||||
nand-is-boot-medium;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x00000000 0x00150000>;
|
||||
|
|
|
|||
|
|
@ -50,6 +50,8 @@
|
|||
ndfc@1,0 {
|
||||
status = "okay";
|
||||
nand {
|
||||
nand-is-boot-medium;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x00000000 0x00100000>;
|
||||
|
|
|
|||
|
|
@ -36,6 +36,8 @@
|
|||
status = "okay";
|
||||
/* 32 MiB SLC NAND Flash */
|
||||
nand {
|
||||
nand-is-boot-medium;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x00000000 0x00100000>;
|
||||
|
|
|
|||
|
|
@ -173,10 +173,13 @@
|
|||
};
|
||||
|
||||
&EBC0 {
|
||||
ndfc@1,0 {
|
||||
ndfc: ndfc@1,0 {
|
||||
|
||||
status = "okay";
|
||||
/* 128 MiB Nand Flash */
|
||||
nand {
|
||||
nand-is-boot-medium;
|
||||
|
||||
partition0,0@0 {
|
||||
label = "NAND 128MiB 3,3V 8-bit";
|
||||
reg = <0x00000000 0x08000000>;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,30 @@
|
|||
--- a/arch/powerpc/platforms/44x/Kconfig
|
||||
+++ b/arch/powerpc/platforms/44x/Kconfig
|
||||
@@ -121,6 +121,17 @@ config CANYONLANDS
|
||||
help
|
||||
This option enables support for the AMCC PPC460EX evaluation board.
|
||||
|
||||
+config APOLLO3G
|
||||
+ bool "Apollo3G"
|
||||
+ depends on 44x
|
||||
+ default n
|
||||
+ select PPC44x_SIMPLE
|
||||
+ select APM821xx
|
||||
+ select IBM_EMAC_RGMII
|
||||
+ select 460EX
|
||||
+ help
|
||||
+ This option enables support for the AMCC Apollo 3G board.
|
||||
+
|
||||
config GLACIER
|
||||
bool "Glacier"
|
||||
depends on 44x
|
||||
--- a/arch/powerpc/platforms/44x/ppc44x_simple.c
|
||||
+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
|
||||
@@ -47,6 +47,7 @@ machine_device_initcall(ppc44x_simple, p
|
||||
* board.c file for it rather than adding it to this list.
|
||||
*/
|
||||
static char *board[] __initdata = {
|
||||
+ "amcc,apollo3g",
|
||||
"amcc,arches",
|
||||
"amcc,bamboo",
|
||||
"apm,bluestone",
|
||||
|
|
@ -0,0 +1,51 @@
|
|||
--- a/arch/powerpc/platforms/4xx/pci.c
|
||||
+++ b/arch/powerpc/platforms/4xx/pci.c
|
||||
@@ -1060,15 +1060,24 @@ static int __init apm821xx_pciex_init_po
|
||||
u32 val;
|
||||
|
||||
/*
|
||||
- * Do a software reset on PCIe ports.
|
||||
- * This code is to fix the issue that pci drivers doesn't re-assign
|
||||
- * bus number for PCIE devices after Uboot
|
||||
- * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
|
||||
- * PT quad port, SAS LSI 1064E)
|
||||
+ * Only reset the PHY when no link is currently established.
|
||||
+ * This is for the Atheros PCIe board which has problems to establish
|
||||
+ * the link (again) after this PHY reset. All other currently tested
|
||||
+ * PCIe boards don't show this problem.
|
||||
*/
|
||||
-
|
||||
- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
|
||||
- mdelay(10);
|
||||
+ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
|
||||
+ if (!(val & 0x00001000)) {
|
||||
+ /*
|
||||
+ * Do a software reset on PCIe ports.
|
||||
+ * This code is to fix the issue that pci drivers doesn't re-assign
|
||||
+ * bus number for PCIE devices after Uboot
|
||||
+ * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
|
||||
+ * PT quad port, SAS LSI 1064E)
|
||||
+ */
|
||||
+
|
||||
+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
|
||||
+ mdelay(10);
|
||||
+ }
|
||||
|
||||
if (port->endpoint)
|
||||
val = PTYPE_LEGACY_ENDPOINT << 20;
|
||||
@@ -1085,9 +1094,12 @@ static int __init apm821xx_pciex_init_po
|
||||
mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130);
|
||||
mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
|
||||
|
||||
- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
|
||||
- mdelay(50);
|
||||
- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
|
||||
+ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
|
||||
+ if (!(val & 0x00001000)) {
|
||||
+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
|
||||
+ mdelay(50);
|
||||
+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
|
||||
+ }
|
||||
|
||||
mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
|
||||
mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
|
||||
|
|
@ -0,0 +1,14 @@
|
|||
--- a/arch/powerpc/platforms/4xx/pci.c
|
||||
+++ b/arch/powerpc/platforms/4xx/pci.c
|
||||
@@ -1902,9 +1902,9 @@ static void __init ppc4xx_configure_pcie
|
||||
* if it works
|
||||
*/
|
||||
out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
|
||||
- out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
|
||||
+ out_le32(mbase + PECFG_PIM0LAH, 0x00000008);
|
||||
out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
|
||||
- out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
|
||||
+ out_le32(mbase + PECFG_PIM1LAH, 0x0000000c);
|
||||
out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
|
||||
out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
|
||||
|
||||
|
|
@ -0,0 +1,53 @@
|
|||
From a0dc613140bab907a3d5787a7ae7b0638bf674d0 Mon Sep 17 00:00:00 2001
|
||||
From: Christian Lamparter <chunkeey@gmail.com>
|
||||
Date: Thu, 23 Jun 2016 20:28:20 +0200
|
||||
Subject: [PATCH] usb: xhci: force MSI for uPD720201 and
|
||||
uPD720202
|
||||
|
||||
The APM82181 does not support MSI-X. When probed, it will
|
||||
produce a noisy warning.
|
||||
|
||||
---
|
||||
drivers/usb/host/pci-quirks.c | 362 ++++++++++++++++++++++++++++++++++++++++++
|
||||
1 file changed, 362 insertions(+)
|
||||
|
||||
--- a/drivers/usb/host/xhci-pci.c
|
||||
+++ b/drivers/usb/host/xhci-pci.c
|
||||
@@ -260,6 +260,7 @@ static void xhci_pci_quirks(struct devic
|
||||
pdev->device == 0x0015) {
|
||||
xhci->quirks |= XHCI_RESET_ON_RESUME;
|
||||
xhci->quirks |= XHCI_ZERO_64B_REGS;
|
||||
+ xhci->quirks |= XHCI_FORCE_MSI;
|
||||
}
|
||||
if (pdev->vendor == PCI_VENDOR_ID_VIA)
|
||||
xhci->quirks |= XHCI_RESET_ON_RESUME;
|
||||
--- a/drivers/usb/host/xhci.c
|
||||
+++ b/drivers/usb/host/xhci.c
|
||||
@@ -423,10 +423,14 @@ static int xhci_try_enable_msi(struct us
|
||||
free_irq(hcd->irq, hcd);
|
||||
hcd->irq = 0;
|
||||
|
||||
- ret = xhci_setup_msix(xhci);
|
||||
- if (ret)
|
||||
- /* fall back to msi*/
|
||||
+ if (xhci->quirks & XHCI_FORCE_MSI) {
|
||||
ret = xhci_setup_msi(xhci);
|
||||
+ } else {
|
||||
+ ret = xhci_setup_msix(xhci);
|
||||
+ if (ret)
|
||||
+ /* fall back to msi*/
|
||||
+ ret = xhci_setup_msi(xhci);
|
||||
+ }
|
||||
|
||||
if (!ret) {
|
||||
hcd->msi_enabled = 1;
|
||||
--- a/drivers/usb/host/xhci.h
|
||||
+++ b/drivers/usb/host/xhci.h
|
||||
@@ -1886,6 +1886,7 @@ struct xhci_hcd {
|
||||
struct xhci_hub usb2_rhub;
|
||||
struct xhci_hub usb3_rhub;
|
||||
/* support xHCI 1.0 spec USB2 hardware LPM */
|
||||
+#define XHCI_FORCE_MSI (1 << 24)
|
||||
unsigned hw_lpm_support:1;
|
||||
/* Broken Suspend flag for SNPS Suspend resume issue */
|
||||
unsigned broken_suspend:1;
|
||||
|
|
@ -0,0 +1,65 @@
|
|||
From 694f9bfb8efaef8a33e8992015ff9d0866faf4a2 Mon Sep 17 00:00:00 2001
|
||||
From: Christian Lamparter <chunkeey@gmail.com>
|
||||
Date: Sun, 17 Dec 2017 17:27:15 +0100
|
||||
Subject: [PATCH 1/2] hwmon: tc654 add detection routine
|
||||
|
||||
This patch adds a detection routine for the TC654/TC655
|
||||
chips. Both IDs are listed in the Datasheet.
|
||||
|
||||
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
|
||||
---
|
||||
drivers/hwmon/tc654.c | 29 +++++++++++++++++++++++++++++
|
||||
1 file changed, 29 insertions(+)
|
||||
|
||||
--- a/drivers/hwmon/tc654.c
|
||||
+++ b/drivers/hwmon/tc654.c
|
||||
@@ -55,6 +55,11 @@ enum tc654_regs {
|
||||
/* Register data is read (and cached) at most once per second. */
|
||||
#define TC654_UPDATE_INTERVAL HZ
|
||||
|
||||
+/* Manufacturer and Version Identification Register Values */
|
||||
+#define TC654_MFR_ID_MICROCHIP 0x84
|
||||
+#define TC654_VER_ID 0x00
|
||||
+#define TC655_VER_ID 0x01
|
||||
+
|
||||
struct tc654_data {
|
||||
struct i2c_client *client;
|
||||
|
||||
@@ -481,6 +486,29 @@ static const struct i2c_device_id tc654_
|
||||
{}
|
||||
};
|
||||
|
||||
+static int
|
||||
+tc654_detect(struct i2c_client *new_client, struct i2c_board_info *info)
|
||||
+{
|
||||
+ struct i2c_adapter *adapter = new_client->adapter;
|
||||
+ int manufacturer, product;
|
||||
+
|
||||
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
||||
+ return -ENODEV;
|
||||
+
|
||||
+ manufacturer = i2c_smbus_read_byte_data(new_client, TC654_REG_MFR_ID);
|
||||
+ if (manufacturer != TC654_MFR_ID_MICROCHIP)
|
||||
+ return -ENODEV;
|
||||
+
|
||||
+ product = i2c_smbus_read_byte_data(new_client, TC654_REG_VER_ID);
|
||||
+ if (!((product == TC654_VER_ID) || (product == TC655_VER_ID)))
|
||||
+ return -ENODEV;
|
||||
+
|
||||
+ strlcpy(info->type, product == TC654_VER_ID ? "tc654" : "tc655",
|
||||
+ I2C_NAME_SIZE);
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+
|
||||
MODULE_DEVICE_TABLE(i2c, tc654_id);
|
||||
|
||||
static struct i2c_driver tc654_driver = {
|
||||
@@ -489,6 +517,7 @@ static struct i2c_driver tc654_driver =
|
||||
},
|
||||
.probe_new = tc654_probe,
|
||||
.id_table = tc654_id,
|
||||
+ .detect = tc654_detect,
|
||||
};
|
||||
|
||||
module_i2c_driver(tc654_driver);
|
||||
|
|
@ -0,0 +1,174 @@
|
|||
From 9cb27801b5cbad2e1aaf45aac428cb2fac5e1372 Mon Sep 17 00:00:00 2001
|
||||
From: Christian Lamparter <chunkeey@gmail.com>
|
||||
Date: Sun, 17 Dec 2017 17:29:13 +0100
|
||||
Subject: [PATCH] hwmon: tc654: add thermal_cooling device
|
||||
|
||||
This patch adds a thermaL_cooling device to the tc654 driver.
|
||||
This allows the chip to be used for DT-based cooling.
|
||||
|
||||
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
|
||||
---
|
||||
drivers/hwmon/tc654.c | 103 +++++++++++++++++++++++++++++++++++-------
|
||||
1 file changed, 86 insertions(+), 17 deletions(-)
|
||||
|
||||
--- a/drivers/hwmon/tc654.c
|
||||
+++ b/drivers/hwmon/tc654.c
|
||||
@@ -15,6 +15,7 @@
|
||||
#include <linux/module.h>
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/slab.h>
|
||||
+#include <linux/thermal.h>
|
||||
#include <linux/util_macros.h>
|
||||
|
||||
enum tc654_regs {
|
||||
@@ -132,6 +133,9 @@ struct tc654_data {
|
||||
* writable register used to control the duty
|
||||
* cycle of the V OUT output.
|
||||
*/
|
||||
+
|
||||
+ /* optional cooling device */
|
||||
+ struct thermal_cooling_device *cdev;
|
||||
};
|
||||
|
||||
/* helper to grab and cache data, at most one time per second */
|
||||
@@ -367,36 +371,30 @@ static ssize_t pwm_mode_store(struct dev
|
||||
static const int tc654_pwm_map[16] = { 77, 88, 102, 112, 124, 136, 148, 160,
|
||||
172, 184, 196, 207, 219, 231, 243, 255};
|
||||
|
||||
+static int get_pwm(struct tc654_data *data)
|
||||
+{
|
||||
+ if (data->config & TC654_REG_CONFIG_SDM)
|
||||
+ return 0;
|
||||
+ else
|
||||
+ return tc654_pwm_map[data->duty_cycle];
|
||||
+}
|
||||
+
|
||||
static ssize_t pwm_show(struct device *dev, struct device_attribute *da,
|
||||
char *buf)
|
||||
{
|
||||
struct tc654_data *data = tc654_update_client(dev);
|
||||
- int pwm;
|
||||
|
||||
if (IS_ERR(data))
|
||||
return PTR_ERR(data);
|
||||
|
||||
- if (data->config & TC654_REG_CONFIG_SDM)
|
||||
- pwm = 0;
|
||||
- else
|
||||
- pwm = tc654_pwm_map[data->duty_cycle];
|
||||
-
|
||||
- return sprintf(buf, "%d\n", pwm);
|
||||
+ return sprintf(buf, "%d\n", get_pwm(data));
|
||||
}
|
||||
|
||||
-static ssize_t pwm_store(struct device *dev, struct device_attribute *da,
|
||||
- const char *buf, size_t count)
|
||||
+static int _set_pwm(struct tc654_data *data, unsigned long val)
|
||||
{
|
||||
- struct tc654_data *data = dev_get_drvdata(dev);
|
||||
struct i2c_client *client = data->client;
|
||||
- unsigned long val;
|
||||
int ret;
|
||||
|
||||
- if (kstrtoul(buf, 10, &val))
|
||||
- return -EINVAL;
|
||||
- if (val > 255)
|
||||
- return -EINVAL;
|
||||
-
|
||||
mutex_lock(&data->update_lock);
|
||||
|
||||
if (val == 0)
|
||||
@@ -416,6 +414,22 @@ static ssize_t pwm_store(struct device *
|
||||
|
||||
out:
|
||||
mutex_unlock(&data->update_lock);
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
+static ssize_t pwm_store(struct device *dev, struct device_attribute *da,
|
||||
+ const char *buf, size_t count)
|
||||
+{
|
||||
+ struct tc654_data *data = dev_get_drvdata(dev);
|
||||
+ unsigned long val;
|
||||
+ int ret;
|
||||
+
|
||||
+ if (kstrtoul(buf, 10, &val))
|
||||
+ return -EINVAL;
|
||||
+ if (val > 255)
|
||||
+ return -EINVAL;
|
||||
+
|
||||
+ ret = _set_pwm(data, val);
|
||||
return ret < 0 ? ret : count;
|
||||
}
|
||||
|
||||
@@ -447,6 +461,47 @@ static struct attribute *tc654_attrs[] =
|
||||
|
||||
ATTRIBUTE_GROUPS(tc654);
|
||||
|
||||
+/* cooling device */
|
||||
+
|
||||
+static int tc654_get_max_state(struct thermal_cooling_device *cdev,
|
||||
+ unsigned long *state)
|
||||
+{
|
||||
+ *state = 255;
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int tc654_get_cur_state(struct thermal_cooling_device *cdev,
|
||||
+ unsigned long *state)
|
||||
+{
|
||||
+ struct tc654_data *data = tc654_update_client(cdev->devdata);
|
||||
+
|
||||
+ if (IS_ERR(data))
|
||||
+ return PTR_ERR(data);
|
||||
+
|
||||
+ *state = get_pwm(data);
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int tc654_set_cur_state(struct thermal_cooling_device *cdev,
|
||||
+ unsigned long state)
|
||||
+{
|
||||
+ struct tc654_data *data = tc654_update_client(cdev->devdata);
|
||||
+
|
||||
+ if (IS_ERR(data))
|
||||
+ return PTR_ERR(data);
|
||||
+
|
||||
+ if (state > 255)
|
||||
+ return -EINVAL;
|
||||
+
|
||||
+ return _set_pwm(data, state);
|
||||
+}
|
||||
+
|
||||
+static const struct thermal_cooling_device_ops tc654_fan_cool_ops = {
|
||||
+ .get_max_state = tc654_get_max_state,
|
||||
+ .get_cur_state = tc654_get_cur_state,
|
||||
+ .set_cur_state = tc654_set_cur_state,
|
||||
+};
|
||||
+
|
||||
/*
|
||||
* device probe and removal
|
||||
*/
|
||||
@@ -477,7 +532,21 @@ static int tc654_probe(struct i2c_client
|
||||
hwmon_dev =
|
||||
devm_hwmon_device_register_with_groups(dev, client->name, data,
|
||||
tc654_groups);
|
||||
- return PTR_ERR_OR_ZERO(hwmon_dev);
|
||||
+ if (IS_ERR(hwmon_dev))
|
||||
+ return PTR_ERR(hwmon_dev);
|
||||
+
|
||||
+#if IS_ENABLED(CONFIG_OF)
|
||||
+ /* Optional cooling device register for Device tree platforms */
|
||||
+ data->cdev = thermal_of_cooling_device_register(client->dev.of_node,
|
||||
+ "tc654", hwmon_dev,
|
||||
+ &tc654_fan_cool_ops);
|
||||
+#else /* CONFIG_OF */
|
||||
+ /* Optional cooling device register for non Device tree platforms */
|
||||
+ data->cdev = thermal_cooling_device_register("tc654", hwmon_dev,
|
||||
+ &tc654_fan_cool_ops);
|
||||
+#endif /* CONFIG_OF */
|
||||
+
|
||||
+ return PTR_ERR_OR_ZERO(data->cdev);
|
||||
}
|
||||
|
||||
static const struct i2c_device_id tc654_id[] = {
|
||||
|
|
@ -0,0 +1,29 @@
|
|||
From c9395ad54e2cabb87d408becc37566f3d8248933 Mon Sep 17 00:00:00 2001
|
||||
From: Christian Lamparter <chunkeey@gmail.com>
|
||||
Date: Sun, 1 Dec 2019 02:08:23 +0100
|
||||
Subject: [PATCH] powerpc: bootwrapper: force gzip as mkimage's compression
|
||||
method
|
||||
|
||||
Due to CONFIG_KERNEL_XZ symbol, the bootwrapper code tries to
|
||||
instruct the mkimage to use the xz compression, which isn't
|
||||
supported. This patch forces the gzip compression, which is
|
||||
supported and doesn't matter because the generated uImage for
|
||||
the apm821xx target gets ignored as the OpenWrt toolchain will
|
||||
do separate U-Boot kernel images for each device individually.
|
||||
|
||||
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
|
||||
---
|
||||
arch/powerpc/boot/Makefile | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
--- a/arch/powerpc/boot/Makefile
|
||||
+++ b/arch/powerpc/boot/Makefile
|
||||
@@ -250,7 +250,7 @@ compressor-$(CONFIG_KERNEL_LZO) := lzo
|
||||
|
||||
# args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd
|
||||
quiet_cmd_wrap = WRAP $@
|
||||
- cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z $(compressor-y) -c -o $@ -p $2 \
|
||||
+ cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z gzip -c -o $@ -p $2 \
|
||||
$(CROSSWRAP) $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) \
|
||||
vmlinux
|
||||
|
||||
Loading…
Reference in New Issue