bmips: add support for Comtrend AR-5381u
The Comtrend AR-5381u is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 @ 320Mhz - RAM: 64 MB DDR - Flash: 16 MB SPI NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: miniPCI Broadcom BCM43225 802.11bgn - USB: 1x 2.0 - Buttons: 1x (reset) - LEDs: yes - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the power switch. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This commit is contained in:
Álvaro Fernández Rojas
parent
9519a62549
commit
bcdf861519
|
|
@ -5,6 +5,7 @@
|
|||
board_config_update
|
||||
|
||||
case "$(board_name)" in
|
||||
comtrend,ar-5381u |\
|
||||
comtrend,ar-5387un)
|
||||
ucidef_set_bridge_device switch
|
||||
ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,7 @@
|
|||
. /lib/functions.sh
|
||||
|
||||
case "$(board_name)" in
|
||||
comtrend,ar-5381u |\
|
||||
comtrend,ar-5387un)
|
||||
mtd fixtrx firmware
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,190 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#include "bcm6328.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Comtrend AR-5381u";
|
||||
compatible = "comtrend,ar-5381u", "brcm,bcm6328";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_alarm_red;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_green;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <100>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
bcm43225-sprom {
|
||||
compatible = "brcm,bcma-sprom";
|
||||
|
||||
pci-bus = <1>;
|
||||
pci-dev = <0>;
|
||||
|
||||
nvmem-cells = <&macaddr_cfe_6a0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <1>;
|
||||
|
||||
brcm,sprom = "brcm/bcm43225-sprom.bin";
|
||||
brcm,sprom-fixups = <97 0xfee5>,
|
||||
<98 0x157c>,
|
||||
<99 0xfae7>,
|
||||
<113 0xfefa>,
|
||||
<114 0x15d6>,
|
||||
<115 0xfaf8>;
|
||||
};
|
||||
};
|
||||
|
||||
&ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðernet {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cells = <&macaddr_cfe_6a0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&hsspi {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
spi-max-frequency = <16666667>;
|
||||
spi-tx-bus-width = <2>;
|
||||
spi-rx-bus-width = <2>;
|
||||
reg = <0>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
cfe: partition@0 {
|
||||
reg = <0x000000 0x010000>;
|
||||
label = "cfe";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@10000 {
|
||||
compatible = "brcm,bcm963xx-imagetag";
|
||||
reg = <0x010000 0xfe0000>;
|
||||
label = "firmware";
|
||||
};
|
||||
|
||||
partition@ff0000 {
|
||||
reg = <0xff0000 0x010000>;
|
||||
label = "nvram";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&leds {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_leds>;
|
||||
|
||||
led_alarm_red: led@2 {
|
||||
reg = <2>;
|
||||
active-low;
|
||||
label = "red:alarm";
|
||||
panic-indicator;
|
||||
};
|
||||
|
||||
led@3 {
|
||||
reg = <3>;
|
||||
active-low;
|
||||
label = "green:internet";
|
||||
};
|
||||
|
||||
led_power_green: led@4 {
|
||||
reg = <4>;
|
||||
active-low;
|
||||
label = "green:power";
|
||||
};
|
||||
};
|
||||
|
||||
&ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pinctrl_leds: leds {
|
||||
function = "led";
|
||||
pins = "gpio2", "gpio3", "gpio4";
|
||||
};
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "lan1";
|
||||
|
||||
phy-handle = <&phy1>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan2";
|
||||
|
||||
phy-handle = <&phy2>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan3";
|
||||
|
||||
phy-handle = <&phy3>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan4";
|
||||
|
||||
phy-handle = <&phy4>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cfe {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_cfe_6a0: macaddr@6a0 {
|
||||
reg = <0x6a0 0x6>;
|
||||
};
|
||||
};
|
||||
|
|
@ -1,5 +1,18 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
define Device/comtrend_ar-5381u
|
||||
$(Device/bcm63xx-cfe)
|
||||
DEVICE_VENDOR := Comtrend
|
||||
DEVICE_MODEL := AR-5381u
|
||||
CHIP_ID := 6328
|
||||
CFE_BOARD_ID := 96328A-1241N
|
||||
FLASH_MB := 16
|
||||
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
||||
$(B43_PACKAGES) broadcom-43225-sprom \
|
||||
kmod-leds-bcm6328
|
||||
endef
|
||||
TARGET_DEVICES += comtrend_ar-5381u
|
||||
|
||||
define Device/comtrend_ar-5387un
|
||||
$(Device/bcm63xx-cfe)
|
||||
DEVICE_VENDOR := Comtrend
|
||||
|
|
|
|||
Loading…
Reference in New Issue