mirror
/
openwrt
mirror of https://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Releases Activity

ramips: convert most mtd-mac-address cases in DTSI to nvmem 

Convert most of the cases from mtd-mac-address to nvmem where
MAC addresses are set in the DTSI, but the partitions are only
located in the device DTS. This posed some problems earlier, since
in these cases we are using partitions before they are defined,
and the nvmem system did not seem to like that.

There have been a few different resolution approaches, based on
the different tradeoffs of deduplication vs. maintainability:

 1. In many cases, the partition tables were identical except for
    the firmware partition size, and the firmware partition was
    the last in the table.
    In these cases, the partition table has been moved to the
    DTSI, and only the firmware partition's "reg" property has
    been kept in the DTS files. So, the updated nvmem definition
    could stay in the DTSI files as well.

 2. For all other cases, splitting up the partition table would
    have introduced additional complexity. Thus, the nodes to be
    converted to nvmem have been moved to the DTS files where the
    partitioning was defined.

 3. For Netgear EX2700 and WN3000RP v3, the remaining DTSI file
    was completely dissolved, as it was quite small and the name
    was not really nice either.

 4. The D-Link DIR-853 A3 was converted to nvmem as well, though
    it is just a plain DTS file not taken care of in the first
    wave.

In addition, some minor rearrangements have been made for tidyness.

Not covered (yet) by this patch are:

 * Various unielec devices
 * The D-Link DIR-8xx family

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Adrian Schmutzler 2021-08-17 20:53:27 +02:00
parent 9a79fe20e8
commit ba3d92c5a0
47 changed files with 944 additions and 1027 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

112
target/linux/ramips/dts/mt7620a_netgear_ex2700.dts
View File

@ -3,7 +3,10 @@
* Copyright (C) 2016 Joseph C. Lehner <joseph.c.lehner@gmail.com>
*/
#include "mt7620a_netgear_ex2700_wn3000rp-v3.dtsi"
#include "mt7620a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "netgear,ex2700", "ralink,mt7620a-soc";
@ -16,6 +19,22 @@
led-upgrade = &led_power_green;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
@ -57,28 +76,79 @@
};
};
&partitions {
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
&gpio1 {
status = "okay";
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
&spi0 {
status = "okay";
partition@40000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x40000 0x3b0000>;
};
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
art: partition@3f0000 {
label = "art";
reg = <0x3f0000 0x10000>;
read-only;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x40000 0x3b0000>;
};
art: partition@3f0000 {
label = "art";
reg = <0x3f0000 0x10000>;
read-only;
};
};
};
};
&ethernet {
nvmem-cells = <&macaddr_art_0>;
nvmem-cell-names = "mac-address";
};
&wmac {
ralink,mtd-eeprom = <&art 0x1000>;
nvmem-cells = <&macaddr_art_6>;
nvmem-cell-names = "mac-address";
};
&state_default {
default {
groups = "i2c", "uartf", "spi refclk";
function = "gpio";
};
};
&art {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_art_0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_art_6: macaddr@6 {
reg = <0x6 0x6>;
};
};

58
target/linux/ramips/dts/mt7620a_netgear_ex2700_wn3000rp-v3.dtsi
View File

@ -1,58 +0,0 @@
#include "mt7620a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&gpio1 {
status = "okay";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions: partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
};
};
};
&ethernet {
mtd-mac-address = <&art 0x0>;
};
&wmac {
ralink,mtd-eeprom = <&art 0x1000>;
mtd-mac-address = <&art 0x6>;
};
&state_default {
default {
groups = "i2c", "uartf", "spi refclk";
function = "gpio";
};
};

112
target/linux/ramips/dts/mt7620a_netgear_wn3000rp-v3.dts
View File

@ -1,6 +1,9 @@
/* This file is released into the public domain */
#include "mt7620a_netgear_ex2700_wn3000rp-v3.dtsi"
#include "mt7620a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "netgear,wn3000rp-v3", "ralink,mt7620a-soc";
@ -13,6 +16,22 @@
led-upgrade = &led_power_green;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
@ -64,28 +83,79 @@
};
};
&partitions {
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
&gpio1 {
status = "okay";
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
&spi0 {
status = "okay";
partition@40000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x40000 0x7b0000>;
};
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x10000>;
read-only;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x40000 0x7b0000>;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
};
&ethernet {
nvmem-cells = <&macaddr_art_0>;
nvmem-cell-names = "mac-address";
};
&wmac {
ralink,mtd-eeprom = <&art 0x1000>;
nvmem-cells = <&macaddr_art_6>;
nvmem-cell-names = "mac-address";
};
&state_default {
default {
groups = "i2c", "uartf", "spi refclk";
function = "gpio";
};
};
&art {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_art_0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_art_6: macaddr@6 {
reg = <0x6 0x6>;
};
};

40
target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826-16m.dts
View File

@ -5,42 +5,6 @@
model = "Zbtlink ZBT-WE826 (16M)";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
firmware: partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
&firmware {
reg = <0x50000 0xfb0000>;
};

40
target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826-32m.dts
View File

@ -5,42 +5,6 @@
model = "Zbtlink ZBT-WE826 (32M)";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
firmware: partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x1fb0000>;
};
};
};
&firmware {
reg = <0x50000 0x1fb0000>;
};

40
target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826-e.dts
View File

@ -33,44 +33,8 @@
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
firmware: partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x1fb0000>;
};
};
};
&firmware {
reg = <0x50000 0x1fb0000>;
};
&state_default {

53
target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826.dtsi
View File

@ -49,6 +49,46 @@
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
firmware: partition@50000 {
compatible = "denx,uimage";
label = "firmware";
/* reg property is set based on flash size in DTS files */
};
};
};
};
&gpio1 {
status = "okay";
};
@ -70,7 +110,8 @@
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
nvmem-cells = <&macaddr_factory_4>;
nvmem-cell-names = "mac-address";
mediatek,portmap = "llllw";
};
@ -89,3 +130,13 @@
&pcie {
status = "okay";
};
&factory {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_4: macaddr@4 {
reg = <0x4 0x6>;
};
};

40
target/linux/ramips/dts/mt7620n_nexx_wt3020-4m.dts
View File

@ -5,42 +5,6 @@
model = "Nexx WT3020 (4M)";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
};
&firmware {
reg = <0x50000 0x3b0000>;
};

44
target/linux/ramips/dts/mt7620n_nexx_wt3020-8m.dts
View File

@ -5,6 +5,10 @@
model = "Nexx WT3020 (8M)";
};
&firmware {
reg = <0x50000 0x7b0000>;
};
&ehci {
status = "okay";
};
@ -12,43 +16,3 @@
&ohci {
status = "okay";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};

53
target/linux/ramips/dts/mt7620n_nexx_wt3020.dtsi
View File

@ -34,12 +34,53 @@
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
firmware: partition@50000 {
compatible = "denx,uimage";
label = "firmware";
/* reg property is set based on flash size in DTS files */
};
};
};
};
&gpio3 {
status = "okay";
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
nvmem-cells = <&macaddr_factory_4>;
nvmem-cell-names = "mac-address";
mediatek,portmap = "wllll";
};
@ -54,3 +95,13 @@
function = "gpio";
};
};
&factory {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_4: macaddr@4 {
reg = <0x4 0x6>;
};
};

27
target/linux/ramips/dts/mt7621_dlink_dir-853-a3.dts
View File

@ -158,12 +158,14 @@
mediatek,mtd-eeprom = <&factory 0x0>;
/* 5 GHz (phy1) does not take the address from calibration data,
but setting it manually here works */
mtd-mac-address = <&factory 0x4>;
nvmem-cells = <&macaddr_factory_4>;
nvmem-cell-names = "mac-address";
};
};
&gmac0 {
mtd-mac-address = <&factory 0xe000>;
nvmem-cells = <&macaddr_factory_e000>;
nvmem-cell-names = "mac-address";
};
&switch0 {
@ -191,7 +193,8 @@
port@4 {
status = "okay";
label = "wan";
mtd-mac-address = <&factory 0xe006>;
nvmem-cells = <&macaddr_factory_e006>;
nvmem-cell-names = "mac-address";
};
};
};
@ -202,3 +205,21 @@
function = "gpio";
};
};
&factory {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_4: macaddr@4 {
reg = <0x4 0x6>;
};
macaddr_factory_e000: macaddr@e000 {
reg = <0xe000 0x6>;
};
macaddr_factory_e006: macaddr@e006 {
reg = <0xe006 0x6>;
};
};

25
target/linux/ramips/dts/mt7621_netgear_r6220.dts
View File

@ -5,6 +5,10 @@
/ {
compatible = "netgear,r6220", "mediatek,mt7621-soc";
model = "Netgear R6220";
aliases {
label-mac-device = &gmac0;
};
};
&nand {
@ -50,3 +54,24 @@
};
};
};
&gmac0 {
nvmem-cells = <&macaddr_factory_4>;
nvmem-cell-names = "mac-address";
};
&wan {
nvmem-cells = <&macaddr_factory_4>;
nvmem-cell-names = "mac-address";
mac-address-increment = <1>;
};
&factory {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_4: macaddr@4 {
reg = <0x4 0x6>;
};
};

9
target/linux/ramips/dts/mt7621_netgear_sercomm_ayx.dtsi
View File

@ -13,7 +13,6 @@
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
label-mac-device = &gmac0;
};
keys {
@ -106,10 +105,6 @@
};
};
&gmac0 {
mtd-mac-address = <&factory 0x4>;
};
&switch0 {
ports {
port@0 {
@ -132,11 +127,9 @@
label = "lan1";
};
port@4 {
wan: port@4 {
status = "okay";
label = "wan";
mtd-mac-address = <&factory 0x4>;
mac-address-increment = <1>;
};
};
};

25
target/linux/ramips/dts/mt7621_netgear_wndr3700-v5.dts
View File

@ -5,6 +5,10 @@
/ {
compatible = "netgear,wndr3700-v5", "mediatek,mt7621-soc";
model = "Netgear WNDR3700 v5";
aliases {
label-mac-device = &gmac0;
};
};
&spi0 {
@ -46,3 +50,24 @@
};
};
};
&gmac0 {
nvmem-cells = <&macaddr_factory_4>;
nvmem-cell-names = "mac-address";
};
&wan {
nvmem-cells = <&macaddr_factory_4>;
nvmem-cell-names = "mac-address";
mac-address-increment = <1>;
};
&factory {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_4: macaddr@4 {
reg = <0x4 0x6>;
};
};

8
target/linux/ramips/dts/mt7621_ubnt_unifi-6-lite.dts
View File

@ -73,13 +73,21 @@
};
};
&gmac0 {
nvmem-cells = <&macaddr_eeprom_0>;
nvmem-cell-names = "mac-address";
};
&wlan_2g {
mediatek,mtd-eeprom = <&factory 0x0>;
nvmem-cells = <&macaddr_eeprom_0>;
nvmem-cell-names = "mac-address";
};
&wlan_5g {
mediatek,mtd-eeprom = <&factory 0x20000>;
nvmem-cells = <&macaddr_eeprom_6>;
nvmem-cell-names = "mac-address";
ieee80211-freq-limit = <5000000 6000000>;

19
target/linux/ramips/dts/mt7621_ubnt_unifi-nanohd.dts
View File

@ -70,6 +70,25 @@
};
};
&gmac0 {
nvmem-cells = <&macaddr_eeprom_0>;
nvmem-cell-names = "mac-address";
};
&wlan_2g {
mediatek,mtd-eeprom = <&factory 0x0>;
};
&wlan_5g {
mediatek,mtd-eeprom = <&factory 0x8000>;
};
&eeprom {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_eeprom_0: macaddr@0 {
reg = <0x0 0x6>;
};
};

5
target/linux/ramips/dts/mt7621_ubnt_unifi.dtsi
View File

@ -50,7 +50,6 @@
&pcie0 {
wlan_2g: wifi@0,0 {
reg = <0x0 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0>;
};
};
@ -60,10 +59,6 @@
};
};
&gmac0 {
mtd-mac-address = <&eeprom 0x0>;
};
&switch0 {
ports {
port@0 {

40
target/linux/ramips/dts/mt7628an_vocore_vocore2-lite.dts
View File

@ -21,42 +21,6 @@
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
&firmware {
reg = <0x50000 0x7b0000>;
};

40
target/linux/ramips/dts/mt7628an_vocore_vocore2.dts
View File

@ -21,42 +21,6 @@
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
&firmware {
reg = <0x50000 0xfb0000>;
};

53
target/linux/ramips/dts/mt7628an_vocore_vocore2.dtsi
View File

@ -14,6 +14,46 @@
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
firmware: partition@50000 {
compatible = "denx,uimage";
label = "firmware";
/* reg property is set based on flash size in DTS files */
};
};
};
};
&state_default {
gpio {
groups = "wled_an", "refclk", "wdt";
@ -28,7 +68,8 @@
};
&ethernet {
mtd-mac-address = <&factory 0x28>;
nvmem-cells = <&macaddr_factory_28>;
nvmem-cell-names = "mac-address";
};
&esw {
@ -55,3 +96,13 @@
&uart2 {
status = "okay";
};
&factory {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_28: macaddr@28 {
reg = <0x28 0x6>;
};
};

50
target/linux/ramips/dts/mt7628an_widora_neo-16m.dts
View File

@ -5,52 +5,6 @@
model = "Widora-NEO (16M)";
};
&spi0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x0fb0000>;
};
};
};
spidev@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "linux,spidev";
reg = <1>;
spi-max-frequency = <40000000>;
};
&firmware {
reg = <0x50000 0xfb0000>;
};

50
target/linux/ramips/dts/mt7628an_widora_neo-32m.dts
View File

@ -5,52 +5,6 @@
model = "Widora-NEO (32M)";
};
&spi0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x1fb0000>;
};
};
};
spidev@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "linux,spidev";
reg = <1>;
spi-max-frequency = <40000000>;
};
&firmware {
reg = <0x50000 0x1fb0000>;
};

63
target/linux/ramips/dts/mt7628an_widora_neo.dtsi
View File

@ -46,6 +46,56 @@
};
};
&spi0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
firmware: partition@50000 {
compatible = "denx,uimage";
label = "firmware";
/* reg property is set based on flash size in DTS files */
};
};
};
spidev@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "linux,spidev";
reg = <1>;
spi-max-frequency = <40000000>;
};
};
&state_default {
gpio {
groups = "gpio";
@ -105,7 +155,8 @@
};
&ethernet {
mtd-mac-address = <&factory 0x28>;
nvmem-cells = <&macaddr_factory_28>;
nvmem-cell-names = "mac-address";
};
&sdhci {
@ -118,3 +169,13 @@
mediatek,mtd-eeprom = <&factory 0x0>;
};
&factory {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_28: macaddr@28 {
reg = <0x28 0x6>;
};
};

40
target/linux/ramips/dts/rt3050_allnet_all0256n-4m.dts
View File

@ -5,42 +5,6 @@
model = "Allnet ALL0256N (4M)";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
};
&firmware {
reg = <0x50000 0x3b0000>;
};

40
target/linux/ramips/dts/rt3050_allnet_all0256n-8m.dts
View File

@ -5,42 +5,6 @@
model = "Allnet ALL0256N (8M)";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
&firmware {
reg = <0x50000 0x7b0000>;
};

53
target/linux/ramips/dts/rt3050_allnet_all0256n.dtsi
View File

@ -37,6 +37,46 @@
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
firmware: partition@50000 {
compatible = "denx,uimage";
label = "firmware";
/* reg property is set based on flash size in DTS files */
};
};
};
};
&state_default {
gpio {
groups = "i2c", "jtag", "rgmii", "mdio", "uartf";
@ -45,7 +85,8 @@
};
&ethernet {
mtd-mac-address = <&factory 0x28>;
nvmem-cells = <&macaddr_factory_28>;
nvmem-cell-names = "mac-address";
};
&esw {
@ -55,3 +96,13 @@
&wmac {
ralink,mtd-eeprom = <&factory 0x0>;
};
&factory {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_28: macaddr@28 {
reg = <0x28 0x6>;
};
};

15
target/linux/ramips/dts/rt3050_alphanetworks_asl26555-16m.dts
View File

@ -62,3 +62,18 @@
};
};
};
&ethernet {
nvmem-cells = <&macaddr_devdata_4004>;
nvmem-cell-names = "mac-address";
};
&devdata {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_devdata_4004: macaddr@4004 {
reg = <0x4004 0x6>;
};
};

15
target/linux/ramips/dts/rt3050_alphanetworks_asl26555-8m.dts
View File

@ -56,3 +56,18 @@
};
};
};
&ethernet {
nvmem-cells = <&macaddr_devdata_4004>;
nvmem-cell-names = "mac-address";
};
&devdata {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_devdata_4004: macaddr@4004 {
reg = <0x4004 0x6>;
};
};

4
target/linux/ramips/dts/rt3050_alphanetworks_asl26555.dtsi
View File

@ -84,10 +84,6 @@
};
};
&ethernet {
mtd-mac-address = <&devdata 0x4004>;
};
&esw {
mediatek,portmap = <0x1e>;
};

40
target/linux/ramips/dts/rt5350_7links_px-4885-4m.dts
View File

@ -5,42 +5,6 @@
model = "7Links PX-4885 (4M)";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
label = "devdata";
reg = <0x20000 0x20000>;
read-only;
};
devconf: partition@40000 {
label = "devconf";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
};
&firmware {
reg = <0x50000 0x3b0000>;
};

40
target/linux/ramips/dts/rt5350_7links_px-4885-8m.dts
View File

@ -5,42 +5,6 @@
model = "7Links PX-4885 (8M)";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
label = "devdata";
reg = <0x20000 0x20000>;
read-only;
};
devconf: partition@40000 {
label = "devconf";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
&firmware {
reg = <0x50000 0x7b0000>;
};

53
target/linux/ramips/dts/rt5350_7links_px-4885.dtsi
View File

@ -41,6 +41,46 @@
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
label = "devdata";
reg = <0x20000 0x20000>;
read-only;
};
devconf: partition@40000 {
label = "devconf";
reg = <0x40000 0x10000>;
read-only;
};
firmware: partition@50000 {
compatible = "denx,uimage";
label = "firmware";
/* reg property is set based on flash size in DTS files */
};
};
};
};
&state_default {
gpio {
groups = "i2c", "jtag", "uartf";
@ -49,7 +89,8 @@
};
&ethernet {
mtd-mac-address = <&devconf 0x28>;
nvmem-cells = <&macaddr_devconf_28>;
nvmem-cell-names = "mac-address";
};
&esw {
@ -59,3 +100,13 @@
&wmac {
ralink,mtd-eeprom = <&devconf 0x0>;
};
&devconf {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_devconf_28: macaddr@28 {
reg = <0x28 0x6>;
};
};

40
target/linux/ramips/dts/rt5350_asiarf_awm002-evb-4m.dts
View File

@ -5,42 +5,6 @@
model = "AsiaRF AWM002 EVB (4M)";
};
&spi0 {
status = "okay";
flash@0 {
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
};
&firmware {
reg = <0x50000 0x3b0000>;
};

40
target/linux/ramips/dts/rt5350_asiarf_awm002-evb-8m.dts
View File

@ -5,42 +5,6 @@
model = "AsiaRF AWM002 EVB (8M)";
};
&spi0 {
status = "okay";
flash@0 {
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
&firmware {
reg = <0x50000 0x7b0000>;
};

53
target/linux/ramips/dts/rt5350_asiarf_awm002-evb.dtsi
View File

@ -43,8 +43,49 @@
};
};
&spi0 {
status = "okay";
flash@0 {
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
firmware: partition@50000 {
compatible = "denx,uimage";
label = "firmware";
/* reg property is set based on flash size in DTS files */
};
};
};
};
&ethernet {
mtd-mac-address = <&factory 0x28>;
nvmem-cells = <&macaddr_factory_28>;
nvmem-cell-names = "mac-address";
};
&wmac {
@ -61,3 +102,13 @@
&esw {
mediatek,portmap = <0x3f>;
};
&factory {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_28: macaddr@28 {
reg = <0x28 0x6>;
};
};

40
target/linux/ramips/dts/rt5350_nexx_wt1520-4m.dts
View File

@ -5,42 +5,6 @@
model = "Nexx WT1520 (4M)";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
};
&firmware {
reg = <0x50000 0x3b0000>;
};

40
target/linux/ramips/dts/rt5350_nexx_wt1520-8m.dts
View File

@ -5,42 +5,6 @@
model = "Nexx WT1520 (8M)";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
&firmware {
reg = <0x50000 0x7b0000>;
};

53
target/linux/ramips/dts/rt5350_nexx_wt1520.dtsi
View File

@ -18,6 +18,46 @@
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
firmware: partition@50000 {
compatible = "denx,uimage";
label = "firmware";
/* reg property is set based on flash size in DTS files */
};
};
};
};
&state_default {
gpio {
groups = "jtag", "uartf";
@ -26,9 +66,20 @@
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
nvmem-cells = <&macaddr_factory_4>;
nvmem-cell-names = "mac-address";
};
&wmac {
ralink,mtd-eeprom = <&factory 0x0>;
};
&factory {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_4: macaddr@4 {
reg = <0x4 0x6>;
};
};

40
target/linux/ramips/dts/rt5350_nixcore_x1-16m.dts
View File

@ -5,42 +5,6 @@
model = "NixcoreX1 (16M)";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
&firmware {
reg = <0x50000 0xfb0000>;
};

40
target/linux/ramips/dts/rt5350_nixcore_x1-8m.dts
View File

@ -5,42 +5,6 @@
model = "NixcoreX1 (8M)";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
&firmware {
reg = <0x50000 0x7b0000>;
};

53
target/linux/ramips/dts/rt5350_nixcore_x1.dtsi
View File

@ -108,6 +108,46 @@
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
firmware: partition@50000 {
compatible = "denx,uimage";
label = "firmware";
/* reg property is set based on flash size in DTS files */
};
};
};
};
&gpio1 {
status = "okay";
};
@ -129,7 +169,8 @@
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
nvmem-cells = <&macaddr_factory_4>;
nvmem-cell-names = "mac-address";
};
&esw {
@ -139,3 +180,13 @@
&wmac {
ralink,mtd-eeprom = <&factory 0x0>;
};
&factory {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_4: macaddr@4 {
reg = <0x4 0x6>;
};
};

40
target/linux/ramips/dts/rt5350_poray_m4-4m.dts
View File

@ -5,42 +5,6 @@
model = "Poray M4 (4M)";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
};
&firmware {
reg = <0x50000 0x3b0000>;
};

40
target/linux/ramips/dts/rt5350_poray_m4-8m.dts
View File

@ -5,42 +5,6 @@
model = "Poray M4 (8M)";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
&firmware {
reg = <0x50000 0x7b0000>;
};

53
target/linux/ramips/dts/rt5350_poray_m4.dtsi
View File

@ -34,6 +34,46 @@
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
firmware: partition@50000 {
compatible = "denx,uimage";
label = "firmware";
/* reg property is set based on flash size in DTS files */
};
};
};
};
&state_default {
gpio {
groups = "i2c", "jtag", "uartf";
@ -42,7 +82,8 @@
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
nvmem-cells = <&macaddr_factory_4>;
nvmem-cell-names = "mac-address";
};
&esw {
@ -54,3 +95,13 @@
ralink,mtd-eeprom = <&factory 0x0>;
ralink,led-polarity = <1>;
};
&factory {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_4: macaddr@4 {
reg = <0x4 0x6>;
};
};

40
target/linux/ramips/dts/rt5350_vocore_vocore-16m.dts
View File

@ -5,42 +5,6 @@
model = "VoCore (16M)";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
&firmware {
reg = <0x50000 0xfb0000>;
};

40
target/linux/ramips/dts/rt5350_vocore_vocore-8m.dts
View File

@ -5,42 +5,6 @@
model = "VoCore (8M)";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
&firmware {
reg = <0x50000 0x7b0000>;
};

53
target/linux/ramips/dts/rt5350_vocore_vocore.dtsi
View File

@ -156,6 +156,46 @@
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
firmware: partition@50000 {
compatible = "denx,uimage";
label = "firmware";
/* reg property is set based on flash size in DTS files */
};
};
};
};
&gpio1 {
status = "okay";
};
@ -172,7 +212,8 @@
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
nvmem-cells = <&macaddr_factory_4>;
nvmem-cell-names = "mac-address";
};
&esw {
@ -193,3 +234,13 @@
reg = <0>;
};
};
&factory {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_4: macaddr@4 {
reg = <0x4 0x6>;
};
};