mirror
/
openwrt
mirror of https://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Releases Activity

ramips: add support for TP-Link RE500 v1 

This device uses the same hardware as RE650 v1 which got supported in
8c51dde.

Hardware specification:

- SoC 880 MHz - MediaTek MT7621AT
- 128 MB of DDR3 RAM
- 16 MB - Winbond 25Q128FVSG
- 4T4R 2.4 GHz - MediaTek MT7615E
- 4T4R 5 GHz - MediaTek MT7615E
- 1x 1 Gbps Ethernet - MT7621AT integrated
- 7x LEDs (Power, 2G, 5G, WPS(x2), Lan(x2))
- 4x buttons (Reset, Power, WPS, LED)
- UART header (J1) - 2:GND, 3:RX, 4:TX
  Serial console @ 57600,8n1

Flash instructions:

Upload
openwrt-ramips-mt7621-tplink_re500-v1-squashfs-factory.bin
from the RE500 web interface.

TFTP recovery to stock firmware:

Unfortunately, I can't find an easy way to recover the RE
without opening the device and using modified binaries. The
TFTP upload will only work if selected from u-boot, which
means you have to open the device and attach to the serial
console. The TFTP update procedure does *not* accept the
published vendor firmware binaries. However, it allows to
flash kernel + rootfs binaries, and this works if you have
a backup of the original contents of the flash. It's probably
possible to create special image out of the vendor binaries
and use that as recovery image.

Signed-off-by: Christoph Krapp <achterin@googlemail.com>
[remove dts-v1 in DTSI, do not touch WiFi LEDs for RE650, keep
state_default in DTS files, fix label-mac-device, use lower case
for WiFi LEDs]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Christoph Krapp 2020-07-06 23:05:25 +02:00 committed by Adrian Schmutzler
parent 982468de35
commit ba0f4f0cfd
7 changed files with 248 additions and 125 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

64
target/linux/ramips/dts/mt7621_tplink_re500-v1.dts Normal file
View File

@ -0,0 +1,64 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "mt7621_tplink_rexx0-v1.dtsi"
/ {
compatible = "tplink,re500-v1", "mediatek,mt7621-soc";
model = "TP-Link RE500 v1";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "re500-v1:blue:power";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
wifi2g {
label = "re500-v1:blue:wifi2g";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wifi5g {
label = "re500-v1:blue:wifi5g";
gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wps_red {
label = "re500-v1:red:wps";
gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
};
wps_blue {
label = "re500-v1:blue:wps";
gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
};
eth_act {
label = "re500-v1:green:eth_act";
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
};
eth_link {
label = "re500-v1:green:eth_link";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
};
};
};
&state_default {
gpio {
groups = "rgmii2", "wdt";
function = "gpio";
};
};

126
target/linux/ramips/dts/mt7621_tplink_re650-v1.dts
View File

@ -1,10 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "mt7621_tplink_rexx0-v1.dtsi"
/ {
compatible = "tplink,re650-v1", "mediatek,mt7621-soc";
@ -15,11 +12,6 @@
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
label-mac-device = &gmac0;
};
chosen {
bootargs = "console=ttyS0,57600";
};
leds {
@ -60,124 +52,8 @@
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
wps {
label = "wps";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
linux,code = <KEY_WPS_BUTTON>;
};
power {
label = "power";
gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
linux,code = <KEY_POWER>;
};
led {
label = "led";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
linux,code = <KEY_LIGHTS_TOGGLE>;
};
reset {
label = "reset";
gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
linux,code = <KEY_RESTART>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x20000 0xde0000>;
};
config: partition@e00000 {
label = "config";
reg = <0xe00000 0x50000>;
read-only;
};
/* range 0xe50000 to 0xff0000 is empty in vendor
* firmware, so we do not use it either
*/
radio: partition@ff0000 {
label = "radio";
reg = <0xff0000 0x10000>;
read-only;
};
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&radio 0x0>;
mtd-mac-address = <&config 0x10008>;
mtd-mac-address-increment = <1>;
ieee80211-freq-limit = <2400000 2500000>;
};
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&radio 0x8000>;
mtd-mac-address = <&config 0x10008>;
mtd-mac-address-increment = <2>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&gmac0 {
mtd-mac-address = <&config 0x10008>;
};
&switch0 {
ports {
port@0 {
status = "okay";
label = "lan";
};
};
};
&state_default {
gpio {
groups = "rgmii2", "wdt";

131
target/linux/ramips/dts/mt7621_tplink_rexx0-v1.dtsi Normal file
View File

@ -0,0 +1,131 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
aliases {
label-mac-device = &gmac0;
};
chosen {
bootargs = "console=ttyS0,57600";
};
keys {
compatible = "gpio-keys";
wps {
label = "wps";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
linux,code = <KEY_WPS_BUTTON>;
};
power {
label = "power";
gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
linux,code = <KEY_POWER>;
};
led {
label = "led";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
linux,code = <KEY_LIGHTS_TOGGLE>;
};
reset {
label = "reset";
gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
linux,code = <KEY_RESTART>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x20000 0xde0000>;
};
config: partition@e00000 {
label = "config";
reg = <0xe00000 0x50000>;
read-only;
};
/* range 0xe50000 to 0xff0000 is empty in vendor
* firmware, so we do not use it either
*/
radio: partition@ff0000 {
label = "radio";
reg = <0xff0000 0x10000>;
read-only;
};
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&radio 0x0>;
mtd-mac-address = <&config 0x10008>;
mtd-mac-address-increment = <1>;
ieee80211-freq-limit = <2400000 2500000>;
};
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&radio 0x8000>;
mtd-mac-address = <&config 0x10008>;
mtd-mac-address-increment = <2>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&gmac0 {
mtd-mac-address = <&config 0x10008>;
};
&switch0 {
ports {
port@0 {
status = "okay";
label = "lan";
};
};
};

10
target/linux/ramips/image/mt7621.mk
View File

@ -842,6 +842,16 @@ define Device/tplink_re350-v1
endef
TARGET_DEVICES += tplink_re350-v1
define Device/tplink_re500-v1
$(Device/tplink-safeloader)
DEVICE_MODEL := RE500
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7615e wpad-basic
TPLINK_BOARD_ID := RE500-V1
IMAGE_SIZE := 14208k
endef
TARGET_DEVICES += tplink_re500-v1
define Device/tplink_re650-v1
$(Device/tplink-safeloader)
DEVICE_MODEL := RE650

4
target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
View File

@ -75,6 +75,10 @@ tplink,re650-v1)
ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "lan" "tx rx"
ucidef_set_led_netdev "eth_link" "LAN link" "$boardname:green:eth_link" "lan" "link"
;;
tplink,re500-v1)
ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "lan" "tx rx"
ucidef_set_led_netdev "eth_link" "LAN link" "$boardname:green:eth_link" "lan" "link"
;;
xzwifi,creativebox-v1)
ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "wan"
;;

1
target/linux/ramips/mt7621/base-files/etc/board.d/02_network
View File

@ -37,6 +37,7 @@ ramips_setup_interfaces()
netgear,ex6150|\
thunder,timecloud|\
tplink,re350-v1|\
tplink,re500-v1|\
tplink,re650-v1|\
ubnt,unifi-nanohd)
ucidef_set_interface_lan "lan"

37
tools/firmware-utils/src/tplink-safeloader.c
View File

@ -1858,6 +1858,43 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system"
},
/** Firmware layout for the RE500 */
{
.id = "RE500-V1",
.vendor = "",
.support_list =
"SupportList:\r\n"
"{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
"{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
"{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
"{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
"{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
"{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
"{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
.support_trail = '\x00',
.soft_ver = NULL,
/* We're using a dynamic kernel/rootfs split here */
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
{"firmware", 0x20000, 0xde0000},
{"partition-table", 0xe00000, 0x02000},
{"default-mac", 0xe10000, 0x00020},
{"pin", 0xe10100, 0x00020},
{"product-info", 0xe11100, 0x01000},
{"soft-version", 0xe20000, 0x01000},
{"support-list", 0xe21000, 0x01000},
{"profile", 0xe22000, 0x08000},
{"user-config", 0xe30000, 0x10000},
{"default-config", 0xe40000, 0x10000},
{"radio", 0xff0000, 0x10000},
{NULL, 0, 0}
},
.first_sysupgrade_partition = "os-image",
.last_sysupgrade_partition = "file-system"
},
/** Firmware layout for the RE650 */
{
.id = "RE650-V1",