ramips: MiWiFi Nano fixes

Use the the dt-bindings macros and add the reset button.

Set the correct polarity for the LEDs and drop the default state.
Remove all trigger for the LEDs. According to the manual the LEDs are
only used to show the operation state, where blue means normal
operation.

Use the MAC-Addresses stored in EEPROM for the ethernet and the
wireless interface.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
[use leds only for boot status indication, add proper commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
This commit is contained in:
L. D. Pinney 2016-12-29 01:43:08 -06:00 committed by Mathias Kresin
parent fd718c5025
commit b28e94d4bf
3 changed files with 31 additions and 18 deletions

View File

@ -225,11 +225,6 @@ miniembplug)
miwifi-mini)
ucidef_set_led_default "power" "power" "$board:red:status" "1"
;;
miwifi-nano)
ucidef_set_led_default "power" "power" "$board:red:status" "1"
ucidef_set_led_wlan "radio_led" "radio" "$board:amber:radio" "phy0radio"
ucidef_set_led_wlan "wifi_led" "wifi" "$board:blue:wifi" "phy0assoc"
;;
mlw221|\
mlwg2)
set_wifi_led "$board:blue:wifi"

View File

@ -152,11 +152,11 @@ get_status_led() {
status_led="$board:blue:wifi"
;;
m3|\
m4)
m4|\
miwifi-nano)
status_led="$board:blue:status"
;;
miwifi-mini|\
miwifi-nano|\
zte-q7)
status_led="$board:red:status"
;;

View File

@ -2,6 +2,9 @@
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "xiaomi,MiWifi Nano", "mediatek,mt7628an-soc";
model = "MiWiFi Nano";
@ -18,20 +21,30 @@
gpio-leds {
compatible = "gpio-leds";
wifi {
label = "miwifi-nano:blue:wifi";
gpios = <&gpio0 11 1>;
default-state = "1";
status_blue {
label = "miwifi-nano:blue:status";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
status {
status_red {
label = "miwifi-nano:red:status";
gpios = <&gpio1 5 1>;
default-state = "on";
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
radio {
label = "miwifi-nano:amber:radio";
gpios = <&gpio1 12 1>;
default-state = "1";
status_amber {
label = "miwifi-nano:amber:status";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
};
};
gpio-keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
@ -47,6 +60,11 @@
&wmac {
status = "okay";
ralink,mtd-eeprom = <&factory 0x4>;
};
&ethernet {
mtd-mac-address = <&factory 0x28>;
};
&spi0 {