ath79: add support for tl-wr1043nd v2/v3
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
This commit is contained in:
Lucian Cristian
John Crispin
parent
0e81968ee8
commit
b1a173d7c3
|
|
@ -57,6 +57,12 @@ ath79_setup_interfaces()
|
|||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
|
||||
;;
|
||||
"tplink,tl-wr1043nd-v2"|\
|
||||
"tplink,tl-wr1043nd-v3")
|
||||
ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0"
|
||||
;;
|
||||
"netgear,wndr3800")
|
||||
ucidef_set_interfaces_lan_wan "eth0" "eth1"
|
||||
ucidef_add_switch "switch0" \
|
||||
|
|
|
|||
|
|
@ -14,12 +14,19 @@
|
|||
|
||||
cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "mips,mips24Kc";
|
||||
compatible = "mips,mips74Kc";
|
||||
clocks = <&pll ATH79_CLK_CPU>;
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
extosc: ref {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "ref";
|
||||
clock-frequency = <40000000>;
|
||||
};
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
ddr_ctrl: memory-controller@18000000 {
|
||||
|
|
@ -46,6 +53,28 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
usb_phy0: usb-phy@18030000 {
|
||||
compatible ="qca,qca9550-usb-phy", "qca,ar7200-usb-phy";
|
||||
|
||||
reset-names = "usb-phy", "usb-suspend-override";
|
||||
resets = <&rst 4>, <&rst 3>;
|
||||
|
||||
#phy-cells = <0>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb_phy1: usb-phy {
|
||||
compatible = "qca,qca9550-usb-phy", "qca,ar7200-usb-phy";
|
||||
|
||||
reset-names = "usb-phy", "usb-suspend-override";
|
||||
resets = <&rst2 4>, <&rst2 3>;
|
||||
|
||||
#phy-cells = <0>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpio: gpio@18040000 {
|
||||
compatible = "qca,ar9557-gpio",
|
||||
"qca,ar9340-gpio";
|
||||
|
|
@ -81,10 +110,12 @@
|
|||
pll: pll-controller@18050000 {
|
||||
compatible = "qca,ar9557-pll",
|
||||
"qca,qca9550-pll";
|
||||
reg = <0x18050000 0x20>;
|
||||
reg = <0x18050000 0x50>;
|
||||
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "cpu", "ddr", "ahb";
|
||||
|
||||
clocks = <&extosc>;
|
||||
};
|
||||
|
||||
wdt: wdt@18060008 {
|
||||
|
|
@ -98,7 +129,7 @@
|
|||
};
|
||||
|
||||
rst: reset-controller@1806001c {
|
||||
compatible = "qca,ar9557-reset",
|
||||
compatible = "qca,qca9550-reset",
|
||||
"qca,ar7100-reset",
|
||||
"simple-bus";
|
||||
reg = <0x1806001c 0x4>;
|
||||
|
|
@ -106,18 +137,6 @@
|
|||
#reset-cells = <1>;
|
||||
interrupt-parent = <&cpuintc>;
|
||||
|
||||
intc2: interrupt-controller@2 {
|
||||
compatible = "qcom,qca9556-intc";
|
||||
|
||||
interrupts = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
qcom,pending-bits = <0x1f0>, /* pcie rc1 */
|
||||
<0xf>; /* wmac */
|
||||
};
|
||||
|
||||
intc3: interrupt-controller@3 {
|
||||
compatible = "qcom,qca9556-intc";
|
||||
|
||||
|
|
@ -126,35 +145,90 @@
|
|||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
qcom,pending-bits = <0x1f000>, /* pcie rc2 */
|
||||
qcom,pending-bits = <0x1f000>, /* pcie rc */
|
||||
<0x1000000>, /* usb1 */
|
||||
<0x10000000>; /* usb2 */
|
||||
};
|
||||
};
|
||||
|
||||
pcie0: pcie-controller@180c0000 {
|
||||
rst2: reset-controller@180600c0 {
|
||||
compatible = "qca,qca9550-reset",
|
||||
"qca,ar7100-reset",
|
||||
"simple-bus";
|
||||
reg = <0x180600c0 0x4>;
|
||||
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
pcie: pcie-controller@18250000 {
|
||||
compatible = "qcom,ar7240-pci";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
bus-range = <0x0 0x0>;
|
||||
reg = <0x180c0000 0x1000>, /* CRP */
|
||||
<0x180f0000 0x100>, /* CTRL */
|
||||
<0x14000000 0x1000>; /* CFG */
|
||||
reg = <0x18250000 0x1000>, /* CRP */
|
||||
<0x18280000 0x100>, /* CTRL */
|
||||
<0x16000000 0x1000>; /* CFG */
|
||||
reg-names = "crp_base", "ctrl_base", "cfg_base";
|
||||
ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */
|
||||
ranges = <0x2000000 0 0x12000000 0x12000000 0 0x02000000 /* pci memory */
|
||||
0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
|
||||
interrupt-parent = <&intc2>;
|
||||
interrupt-parent = <&intc3>;
|
||||
interrupts = <0>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
interrupt-map-mask = <0 0 0 1>;
|
||||
interrupt-map = <0 0 0 0 &pcie0 0>;
|
||||
interrupt-map = <0 0 0 0 &pcie 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
wmac: wmac@18100000 {
|
||||
compatible = "qca,qca9550-wmac";
|
||||
reg = <0x18100000 0x10000>;
|
||||
|
||||
interrupt-parent = <&cpuintc>;
|
||||
interrupts = <2>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
usb0: usb@1b000000 {
|
||||
compatible = "generic-ehci";
|
||||
reg = <0x1b000000 0x1fc>;
|
||||
|
||||
interrupt-parent = <&intc3>;
|
||||
interrupts = <1>;
|
||||
resets = <&rst 5>;
|
||||
reset-names = "usb-host";
|
||||
|
||||
has-transaction-translator;
|
||||
caps-offset = <0x100>;
|
||||
|
||||
phy-names = "usb-phy0";
|
||||
phys = <&usb_phy0>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb1: usb@1b400000 {
|
||||
compatible = "generic-ehci";
|
||||
reg = <0x1b400000 0x1fc>;
|
||||
|
||||
interrupt-parent = <&intc3>;
|
||||
interrupts = <2>;
|
||||
resets = <&rst2 5>;
|
||||
reset-names = "usb-host";
|
||||
|
||||
has-transaction-translator;
|
||||
caps-offset = <0x100>;
|
||||
|
||||
phy-names = "usb-phy1";
|
||||
phys = <&usb_phy1>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi: spi@1f000000 {
|
||||
compatible = "qca,ar9557-spi", "qca,ar7100-spi";
|
||||
reg = <0x1f000000 0x10>;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,12 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "qca9558_tl-wr1043nd.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "tplink,tl-wr1043nd-v2", "qca,qca9557";
|
||||
model = "TP-Link TL-WR1043ND Version 2";
|
||||
};
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "qca9558_tl-wr1043nd.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "tplink,tl-wr1043nd-v3", "qca,qca9557";
|
||||
model = "TP-Link TL-WR1043ND Version 3";
|
||||
};
|
||||
|
|
@ -0,0 +1,194 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "qca9557.dtsi"
|
||||
|
||||
/ {
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x4000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8";
|
||||
};
|
||||
|
||||
aliases {
|
||||
led-status = &system;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
system: system {
|
||||
label = "tp-link:green:system";
|
||||
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
usb {
|
||||
label = "tp-link:green:usb";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
trigger-sources = <&hub_port0>;
|
||||
linux,default-trigger = "usbport";
|
||||
};
|
||||
|
||||
wifi_green {
|
||||
label = "tp-link:green:wlan";
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
wifi_wps {
|
||||
label = "tp-link:green:wps";
|
||||
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
reset {
|
||||
label = "Reset button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
wifi {
|
||||
label = "RFKILL button";
|
||||
linux,code = <KEY_RFKILL>;
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-export {
|
||||
compatible = "gpio-export";
|
||||
#size-cells = <0>;
|
||||
|
||||
gpio_usb_power {
|
||||
gpio-export,name = "tp-link:power:usb";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
|
||||
hub_port0: port@1 {
|
||||
reg = <1>;
|
||||
#trigger-source-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
uboot: partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
label = "firmware";
|
||||
reg = <0x020000 0x7d0000>;
|
||||
};
|
||||
|
||||
art: partition@7f0000 {
|
||||
label = "art";
|
||||
reg = <0x7f0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
|
||||
0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
|
||||
0x10 0x81000080 /* POWER_ON_STRIP */
|
||||
0x50 0xcc35cc35 /* LED_CTRL0 */
|
||||
0x54 0xca35ca35 /* LED_CTRL1 */
|
||||
0x58 0xc935c935 /* LED_CTRL2 */
|
||||
0x5c 0x03ffff00 /* LED_CTRL3 */
|
||||
0x7c 0x0000007e /* PORT0_STATUS */
|
||||
0x94 0x0000007e /* PORT6 STATUS */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
status = "okay";
|
||||
|
||||
phy1: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
mtd-mac-address = <&uboot 0x1fc00>;
|
||||
mtd-mac-address-increment = <1>;
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
ð1 {
|
||||
status = "okay";
|
||||
|
||||
mtd-mac-address = <&uboot 0x1fc00>;
|
||||
phy-handle = <&phy1>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
mtd-cal-data = <&art 0x1000>;
|
||||
mtd-mac-address = <&uboot 0x1fc00>;
|
||||
};
|
||||
|
|
@ -28,6 +28,26 @@ define Device/tl-wr1043nd-v1
|
|||
endef
|
||||
TARGET_DEVICES += tl-wr1043nd-v1
|
||||
|
||||
define Device/tl-wr1043nd-v2
|
||||
$(Device/tplink-8mlzma)
|
||||
ATH_SOC := qca9558
|
||||
DEVICE_TITLE := TP-LINK TL-WR1043N/ND v2
|
||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
||||
TPLINK_HWID := 0x10430002
|
||||
SUPPORTED_DEVICES := tplink,tl-wr1043nd-v2 tl-wr1043nd-v2
|
||||
endef
|
||||
TARGET_DEVICES += tl-wr1043nd-v2
|
||||
|
||||
define Device/tl-wr1043nd-v3
|
||||
$(Device/tplink-8mlzma)
|
||||
ATH_SOC := qca9558
|
||||
DEVICE_TITLE := TP-LINK TL-WR1043N/ND v3
|
||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
||||
TPLINK_HWID := 0x10430003
|
||||
SUPPORTED_DEVICES := tplink,tl-wr1043nd-v3 tl-wr1043nd-v3
|
||||
endef
|
||||
TARGET_DEVICES += tl-wr1043nd-v3
|
||||
|
||||
define Device/tl-wr1043nd-v4
|
||||
$(Device/tplink)
|
||||
ATH_SOC := qca9563
|
||||
|
|
|
|||
Loading…
Reference in New Issue