mirror
/
openwrt
mirror of https://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Releases Activity

ath79: add support for D-Link DAP-2230 A1 

Specifications:
 * QCA9533, 16 MiB Flash, 64 MiB RAM, 802.11n 2T2R
 * 10/100 Ethernet Port, 802.11af PoE

Installation:
 * Factory Web UI is at 192.168.0.50
   login with 'admin' and blank password, flash factory.bin
 * Recovery Web UI is at 192.168.0.50
   connect network cable, hold reset button during power-on and keep it
   pressed until uploading has started (only required when checksum is ok,
   e.g. for reverting back to oem firmware), flash factory.bin

After flashing factory.bin, additional free space can be reclaimed by
flashing sysupgrade.bin, since the factory image requires some padding
to be accepted for upgrading via OEM Web UI.

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
This commit is contained in:
Sebastian Schaper 2020-06-17 00:11:37 +02:00 committed by Adrian Schmutzler
parent 927b9df938
commit b077accb9c
5 changed files with 73 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

56
target/linux/ath79/dts/qca9533_dlink_dap-2230-a1.dts Normal file
View File

@ -0,0 +1,56 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca953x.dtsi"
#include "qca95xx_dlink_dap-2xxx.dtsi"
/ {
compatible = "dlink,dap-2230-a1", "qca,qca9533";
model = "D-Link DAP-2230 A1";
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_green;
led-running = &led_power_green;
led-upgrade = &led_power_green;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led_power_green: power_green {
label = "green:power";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
};
&partitions {
partition@70000 {
label = "firmware";
reg = <0x70000 0xee0000>;
compatible = "wrg";
};
partition@f50000 {
label = "dlink";
reg = <0xf50000 0xa0000>;
read-only;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x10000>;
read-only;
};
};

2
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@ -27,6 +27,7 @@ ath79_setup_interfaces()
devolo,dvl1750x|\
dlink,dap-1330-a1|\
dlink,dap-1365-a1|\
dlink,dap-2230-a1|\
dlink,dir-505|\
engenius,eap300-v2|\
engenius,eap350-v1|\
@ -481,6 +482,7 @@ ath79_setup_macs()
lan_mac=$(mtd_get_mac_text "mp" 0x1)
label_mac=$lan_mac
;;
dlink,dap-2230-a1|\
dlink,dap-2660-a1)
lan_mac=$(mtd_get_mac_ascii bdcfg "lanmac")
label_mac=$lan_mac

3
target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
View File

@ -22,6 +22,9 @@ case "$board" in
dlink,dch-g020-a1)
mtd_get_mac_text "mp" 0x13 > /sys${DEVPATH}/macaddress
;;
dlink,dap-2230-a1)
mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
;;
dlink,dap-2660-a1)
[ "$PHYNBR" -eq 1 ] && \
mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress

1
target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum
View File

@ -13,6 +13,7 @@ fixwrgg() {
board=$(board_name)
case "$board" in
dlink,dap-2230-a1|\
dlink,dap-2660-a1|\
dlink,dap-2695-a1)
fixwrgg

11
target/linux/ath79/image/generic.mk
View File

@ -749,6 +749,17 @@ define Device/dlink_dap-2xxx
KERNEL_INITRAMFS := $$(KERNEL) | mkwrggimg
endef
define Device/dlink_dap-2230-a1
$(Device/dlink_dap-2xxx)
SOC := qca9533
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DAP-2230
DEVICE_VARIANT := A1
IMAGE_SIZE := 15232k
DAP_SIGNATURE := wapn31_dkbs_dap2230
endef
TARGET_DEVICES += dlink_dap-2230-a1
define Device/dlink_dap-2660-a1
$(Device/dlink_dap-2xxx)
SOC := qca9557