mediatek: add Linksys E8450 support
The Linksys E8450, also known as Belkin RT3200, is a dual-band
IEEE 802.11bgn/ac/ax router based on MediaTek MT7622BV and
MediaTek MT7915AN chips.
FCC: K7S-03571 and K7S-03572
Hardware highlights:
- CPU: MediaTek MT7622BV (2x ARM Cortex-A53 @ 1350 MHz max.)
- RAM: 512MB DDR3
- Flash: 128MB SPI-NAND (2k+64)
- Ethernet: MT7531BE switch with 5 1000Base-T ports
CPU port connected with 2500Base-X
- WiFi 2.4 GHz: 802.11bgn 4T4R built-in antennas
MT7622VB built-in
- WiFi 5 GHz: 802.11ac/ax 4T4R built-in antennas
MT7915AN chip on-board via PCIe
MT7975AN front-end
- Buttons: Reset and WPS
- LEDS: 3 user controllable LEDs, 4 wired to switch
- USB: USB2.0, single port
- no Bluetooth (supported by SoC, not wired on board)
- Serial: JST PH 2.0MM 6 Pin connector inside device
----_____________----
[ GND RX - TX - - ]
---------------------
- JTAG: unpopulated ARM JTAG 20-pin connector (works)
This commit adds support for the device in a way that is compatible
with the vendor firmware's bootloader and dual-boot flash layout, the
resulting image can directly be flashed using the vendor firmware.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This commit is contained in:
John Crispin
Daniel Golle
parent
7a6d074824
commit
aa94e34c1d
|
|
@ -0,0 +1,486 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
#include "mt7622.dtsi"
|
||||
#include "mt6380.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Linksys E8450";
|
||||
compatible = "linksys,e8450", "mediatek,mt7622";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
|
||||
};
|
||||
|
||||
cpus {
|
||||
cpu@0 {
|
||||
proc-supply = <&mt6380_vcpu_reg>;
|
||||
sram-supply = <&mt6380_vm_reg>;
|
||||
};
|
||||
|
||||
cpu@1 {
|
||||
proc-supply = <&mt6380_vcpu_reg>;
|
||||
sram-supply = <&mt6380_vm_reg>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
factory {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&pio 102 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power: power_blue {
|
||||
label = "power:blue";
|
||||
gpios = <&pio 95 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
power_orange {
|
||||
label = "power:orange";
|
||||
gpios = <&pio 96 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
inet_blue {
|
||||
label = "inet:blue";
|
||||
gpios = <&pio 97 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
inet_orange {
|
||||
label = "inet:orange";
|
||||
gpios = <&pio 98 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0 0x40000000 0 0x40000000>;
|
||||
};
|
||||
|
||||
reg_1p8v: regulator-1p8v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_5v: regulator-5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&bch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&btif {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cir {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&irrx_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <ð_pins>;
|
||||
status = "okay";
|
||||
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
mdio-bus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
switch@0 {
|
||||
compatible = "mediatek,mt7531";
|
||||
reg = <0>;
|
||||
reset-gpios = <&pio 54 0>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
label = "wan";
|
||||
};
|
||||
|
||||
port@6 {
|
||||
reg = <6>;
|
||||
label = "cpu";
|
||||
ethernet = <&gmac0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&slot0 {
|
||||
mt7915@0,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x05000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pio {
|
||||
/* Attention: GPIO 90 is used to switch between PCIe@1,0 and
|
||||
* SATA functions. i.e. output-high: PCIe, output-low: SATA
|
||||
*/
|
||||
// asm_sel {
|
||||
// gpio-hog;
|
||||
// gpios = <90 GPIO_ACTIVE_HIGH>;
|
||||
// output-high;
|
||||
// };
|
||||
|
||||
eth_pins: eth-pins {
|
||||
mux {
|
||||
function = "eth";
|
||||
groups = "mdc_mdio", "rgmii_via_gmac2";
|
||||
};
|
||||
};
|
||||
|
||||
irrx_pins: irrx-pins {
|
||||
mux {
|
||||
function = "ir";
|
||||
groups = "ir_1_rx";
|
||||
};
|
||||
};
|
||||
|
||||
irtx_pins: irtx-pins {
|
||||
mux {
|
||||
function = "ir";
|
||||
groups = "ir_1_tx";
|
||||
};
|
||||
};
|
||||
|
||||
pcie0_pins: pcie0-pins {
|
||||
mux {
|
||||
function = "pcie";
|
||||
groups = "pcie0_pad_perst",
|
||||
"pcie0_1_waken",
|
||||
"pcie0_1_clkreq";
|
||||
};
|
||||
};
|
||||
|
||||
pcie1_pins: pcie1-pins {
|
||||
mux {
|
||||
function = "pcie";
|
||||
groups = "pcie1_pad_perst",
|
||||
"pcie1_0_waken",
|
||||
"pcie1_0_clkreq";
|
||||
};
|
||||
};
|
||||
|
||||
pmic_bus_pins: pmic-bus-pins {
|
||||
mux {
|
||||
function = "pmic";
|
||||
groups = "pmic_bus";
|
||||
};
|
||||
};
|
||||
|
||||
pwm7_pins: pwm1-2-pins {
|
||||
mux {
|
||||
function = "pwm";
|
||||
groups = "pwm_ch7_2";
|
||||
};
|
||||
};
|
||||
|
||||
wled_pins: wled-pins {
|
||||
mux {
|
||||
function = "led";
|
||||
groups = "wled";
|
||||
};
|
||||
};
|
||||
|
||||
/* Serial NAND is shared pin with SPI-NOR */
|
||||
serial_nand_pins: serial-nand-pins {
|
||||
mux {
|
||||
function = "flash";
|
||||
groups = "snfi";
|
||||
};
|
||||
};
|
||||
|
||||
spic0_pins: spic0-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spic0_0";
|
||||
};
|
||||
};
|
||||
|
||||
spic1_pins: spic1-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spic1_0";
|
||||
};
|
||||
};
|
||||
|
||||
uart0_pins: uart0-pins {
|
||||
mux {
|
||||
function = "uart";
|
||||
groups = "uart0_0_tx_rx" ;
|
||||
};
|
||||
};
|
||||
|
||||
uart2_pins: uart2-pins {
|
||||
mux {
|
||||
function = "uart";
|
||||
groups = "uart2_1_tx_rx" ;
|
||||
};
|
||||
};
|
||||
|
||||
watchdog_pins: watchdog-pins {
|
||||
mux {
|
||||
function = "watchdog";
|
||||
groups = "watchdog";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm7_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwrap {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_bus_pins>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sata_phy {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&snfi {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&serial_nand_pins>;
|
||||
status = "okay";
|
||||
|
||||
spi_nand@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spi-nand";
|
||||
spi-max-frequency = <104000000>;
|
||||
reg = <0>;
|
||||
|
||||
mediatek,bmt-v2;
|
||||
mediatek,bmt-table-size = <0x1000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "Preloader";
|
||||
reg = <0x00000 0x0080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
label = "ATF";
|
||||
reg = <0x80000 0x0040000>;
|
||||
};
|
||||
|
||||
partition@c0000 {
|
||||
label = "u-boot";
|
||||
reg = <0xc0000 0x0080000>;
|
||||
};
|
||||
|
||||
partition@140000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x140000 0x0080000>;
|
||||
};
|
||||
|
||||
factory: partition@1c0000 {
|
||||
label = "factory";
|
||||
reg = <0x1c0000 0x0100000>;
|
||||
};
|
||||
|
||||
partition@300000 {
|
||||
label = "devinfo";
|
||||
reg = <0x300000 0x020000>;
|
||||
};
|
||||
|
||||
partition@320000 {
|
||||
label = "senv";
|
||||
reg = <0x320000 0x020000>;
|
||||
};
|
||||
|
||||
partition@360000 {
|
||||
label = "bootseq";
|
||||
reg = <0x360000 0x020000>;
|
||||
};
|
||||
|
||||
partition@500000 {
|
||||
label = "firmware1";
|
||||
compatible = "denx,fit";
|
||||
openwrt,cmdline-match = "mtdparts=master";
|
||||
reg = <0x500000 0x1E00000>;
|
||||
};
|
||||
|
||||
partition@2300000 {
|
||||
label = "firmware2";
|
||||
compatible = "denx,fit";
|
||||
openwrt,cmdline-match = "mtdparts=slave";
|
||||
reg = <0x2300000 0x1E00000>;
|
||||
};
|
||||
|
||||
partition@4100000 {
|
||||
label = "data";
|
||||
reg = <0x4100000 0x1900000>;
|
||||
};
|
||||
|
||||
partition@5100000 {
|
||||
label = "mfg";
|
||||
reg = <0x5a00000 0x1400000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spic0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spic1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssusb {
|
||||
vusb33-supply = <®_3p3v>;
|
||||
vbus-supply = <®_5v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u3phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&watchdog_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wmac {
|
||||
mediatek,mtd-eeprom = <&factory 0x0000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -38,6 +38,18 @@ define Device/elecom_wrc-2533gent
|
|||
endef
|
||||
TARGET_DEVICES += elecom_wrc-2533gent
|
||||
|
||||
define Device/linksys_e8450
|
||||
DEVICE_VENDOR := Linksys
|
||||
DEVICE_MODEL := E8450
|
||||
DEVICE_ALT0_VENDOR := Belkin
|
||||
DEVICE_ALT0_MODEL := RT3200
|
||||
DEVICE_DTS := mt7622-linksys-e8450
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk \
|
||||
kmod-mt7615e kmod-mt7615-firmware kmod-mt7915e
|
||||
endef
|
||||
TARGET_DEVICES += linksys_e8450
|
||||
|
||||
define Device/mediatek_mt7622-rfb1
|
||||
DEVICE_VENDOR := MediaTek
|
||||
DEVICE_MODEL := MTK7622 rfb1 AP
|
||||
|
|
|
|||
|
|
@ -0,0 +1,18 @@
|
|||
#!/bin/sh
|
||||
|
||||
. /lib/functions/leds.sh
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
board_config_update
|
||||
|
||||
case $board in
|
||||
linksys,e8450)
|
||||
ucidef_set_led_netdev "wan" "WAN" "inet:blue" "wan"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
|
|
@ -10,9 +10,8 @@ mediatek_setup_interfaces()
|
|||
|
||||
case $board in
|
||||
bananapi,bpi-r64-rootdisk|\
|
||||
bananapi,bpi-r64)
|
||||
ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" wan
|
||||
;;
|
||||
bananapi,bpi-r64|\
|
||||
linksys,e8450|\
|
||||
mediatek,mt7622-rfb1)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" wan
|
||||
;;
|
||||
|
|
@ -31,7 +30,15 @@ mediatek_setup_macs()
|
|||
local board="$1"
|
||||
|
||||
case $board in
|
||||
linksys,e8450)
|
||||
wan_mac=$(mtd_get_mac_ascii devinfo wan_mac_addr)
|
||||
lan_mac=$(mtd_get_mac_ascii devinfo lan_mac_addr)
|
||||
label_mac=$wan_mac
|
||||
;;
|
||||
esac
|
||||
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
|
||||
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
|
||||
[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
|
||||
}
|
||||
|
||||
board_config_update
|
||||
|
|
|
|||
|
|
@ -0,0 +1,11 @@
|
|||
#!/bin/sh /etc/rc.common
|
||||
|
||||
START=99
|
||||
|
||||
boot() {
|
||||
case $(board_name) in
|
||||
linksys,e8450)
|
||||
mtd erase senv || true
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
|
@ -10,6 +10,14 @@ platform_do_upgrade() {
|
|||
mediatek,mt7622,ubi)
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
linksys,e8450)
|
||||
if grep -q mtdparts=slave /proc/cmdline; then
|
||||
PART_NAME=firmware2
|
||||
else
|
||||
PART_NAME=firmware1
|
||||
fi
|
||||
default_do_upgrade "$1"
|
||||
;;
|
||||
*)
|
||||
default_do_upgrade "$1"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,122 @@
|
|||
From ea0df4552efcdcc2806fe6eba0540b5f719d80b6 Mon Sep 17 00:00:00 2001
|
||||
From: Davide Fioravanti <pantanastyle@gmail.com>
|
||||
Date: Fri, 8 Jan 2021 15:35:24 +0100
|
||||
Subject: [PATCH 1/1] mtd: spinand: Add support for the Fidelix FM35X1GA
|
||||
|
||||
Datasheet: http://www.hobos.com.cn/upload/datasheet/DS35X1GAXXX_100_rev00.pdf
|
||||
|
||||
Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
|
||||
---
|
||||
drivers/mtd/nand/spi/Makefile | 2 +-
|
||||
drivers/mtd/nand/spi/core.c | 1 +
|
||||
drivers/mtd/nand/spi/fidelix.c | 80 ++++++++++++++++++++++++++++++++++
|
||||
include/linux/mtd/spinand.h | 1 +
|
||||
4 files changed, 83 insertions(+), 1 deletion(-)
|
||||
create mode 100644 drivers/mtd/nand/spi/fidelix.c
|
||||
|
||||
--- a/drivers/mtd/nand/spi/Makefile
|
||||
+++ b/drivers/mtd/nand/spi/Makefile
|
||||
@@ -1,3 +1,3 @@
|
||||
# SPDX-License-Identifier: GPL-2.0
|
||||
-spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o
|
||||
+spinand-objs := core.o fidelix.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o
|
||||
obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
|
||||
--- a/drivers/mtd/nand/spi/core.c
|
||||
+++ b/drivers/mtd/nand/spi/core.c
|
||||
@@ -755,6 +755,7 @@ static const struct nand_ops spinand_ops
|
||||
};
|
||||
|
||||
static const struct spinand_manufacturer *spinand_manufacturers[] = {
|
||||
+ &fidelix_spinand_manufacturer,
|
||||
&gigadevice_spinand_manufacturer,
|
||||
¯onix_spinand_manufacturer,
|
||||
µn_spinand_manufacturer,
|
||||
--- /dev/null
|
||||
+++ b/drivers/mtd/nand/spi/fidelix.c
|
||||
@@ -0,0 +1,76 @@
|
||||
+// SPDX-License-Identifier: GPL-2.0
|
||||
+/*
|
||||
+ * Copyright (c) 2020 Davide Fioravanti <pantanastyle@gmail.com>
|
||||
+ */
|
||||
+
|
||||
+#include <linux/device.h>
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/mtd/spinand.h>
|
||||
+
|
||||
+#define SPINAND_MFR_FIDELIX 0xE5
|
||||
+#define FIDELIX_ECCSR_MASK 0x0F
|
||||
+
|
||||
+static SPINAND_OP_VARIANTS(read_cache_variants,
|
||||
+ SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
|
||||
+ SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
|
||||
+ SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
|
||||
+
|
||||
+static SPINAND_OP_VARIANTS(write_cache_variants,
|
||||
+ SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
|
||||
+ SPINAND_PROG_LOAD(true, 0, NULL, 0));
|
||||
+
|
||||
+static SPINAND_OP_VARIANTS(update_cache_variants,
|
||||
+ SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
|
||||
+ SPINAND_PROG_LOAD(false, 0, NULL, 0));
|
||||
+
|
||||
+static int fm35x1ga_ooblayout_ecc(struct mtd_info *mtd, int section,
|
||||
+ struct mtd_oob_region *region)
|
||||
+{
|
||||
+ if (section > 3)
|
||||
+ return -ERANGE;
|
||||
+
|
||||
+ region->offset = (16 * section) + 8;
|
||||
+ region->length = 8;
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int fm35x1ga_ooblayout_free(struct mtd_info *mtd, int section,
|
||||
+ struct mtd_oob_region *region)
|
||||
+{
|
||||
+ if (section > 3)
|
||||
+ return -ERANGE;
|
||||
+
|
||||
+ region->offset = (16 * section) + 2;
|
||||
+ region->length = 6;
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static const struct mtd_ooblayout_ops fm35x1ga_ooblayout = {
|
||||
+ .ecc = fm35x1ga_ooblayout_ecc,
|
||||
+ .free = fm35x1ga_ooblayout_free,
|
||||
+};
|
||||
+
|
||||
+static const struct spinand_info fidelix_spinand_table[] = {
|
||||
+ SPINAND_INFO("FM35X1GA",
|
||||
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x71),
|
||||
+ NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
|
||||
+ NAND_ECCREQ(4, 512),
|
||||
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
|
||||
+ &write_cache_variants,
|
||||
+ &update_cache_variants),
|
||||
+ SPINAND_HAS_QE_BIT,
|
||||
+ SPINAND_ECCINFO(&fm35x1ga_ooblayout, NULL)),
|
||||
+};
|
||||
+
|
||||
+static const struct spinand_manufacturer_ops fidelix_spinand_manuf_ops = {
|
||||
+};
|
||||
+
|
||||
+const struct spinand_manufacturer fidelix_spinand_manufacturer = {
|
||||
+ .id = SPINAND_MFR_FIDELIX,
|
||||
+ .name = "Fidelix",
|
||||
+ .chips = fidelix_spinand_table,
|
||||
+ .nchips = ARRAY_SIZE(fidelix_spinand_table),
|
||||
+ .ops = &fidelix_spinand_manuf_ops,
|
||||
+};
|
||||
--- a/include/linux/mtd/spinand.h
|
||||
+++ b/include/linux/mtd/spinand.h
|
||||
@@ -238,6 +238,7 @@ struct spinand_manufacturer {
|
||||
};
|
||||
|
||||
/* SPI NAND manufacturers */
|
||||
+extern const struct spinand_manufacturer fidelix_spinand_manufacturer;
|
||||
extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
|
||||
extern const struct spinand_manufacturer macronix_spinand_manufacturer;
|
||||
extern const struct spinand_manufacturer micron_spinand_manufacturer;
|
||||
Loading…
Reference in New Issue