ath79: add support for GL-iNet GL-X750

this patch adds supports for GL-X750.

Specification:
- SOC: QCA9531 (650MHz)
- Flash: 16 MiB (W25Q128FVSG)
- RAM: 128 MiB DDR2
- Ethernet: 10/100: 1xLAN + 10/100: 1xWAN
- Wireless: 2.4GHz (bgn) and 5GHz (ac)
- USB: 1x USB 2.0 port
- Button: 1x reset button
- LED: 5x LEDS (green)

Flash instruction:
The original firmware is openwrt, so both LuCI or sysupgrade can be used.

Signed-off-by: Luo chongjun <luochongjun@gl-inet.com>
This commit is contained in:
Luo chongjun 2018-11-05 10:03:05 +08:00 committed by John Crispin
parent 987b961537
commit 9989fd5154
6 changed files with 159 additions and 2 deletions

View File

@ -33,6 +33,9 @@ etactica,eg200)
ucidef_set_led_oneshot "modbus" "Modbus" "$boardname:red:modbus" "100" "33"
ucidef_set_led_default "etactica" "etactica" "$boardname:red:etactica" "ignore"
;;
glinet,x750)
ucidef_set_led_netdev "wan" "WAN" "gl-x750:green:wan" "eth0"
;;
netgear,wnr612-v2|\
on,n150r)
ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0"

View File

@ -1,4 +1,4 @@
#!/bin/sh
!/bin/sh
. /lib/functions/system.sh
. /lib/functions/uci-defaults.sh
@ -72,7 +72,8 @@ ath79_setup_interfaces()
ucidef_set_interface_lan "eth0" "dhcp"
;;
glinet,ar150|\
glinet,ar300m)
glinet,ar300m|\
glinet,x750)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
iodata,etg3-r|\

View File

@ -87,6 +87,10 @@ board=$(board_name)
case "$FIRMWARE" in
"ath10k/cal-pci-0000:00:00.0.bin")
case $board in
glinet,x750)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
;;
iodata,wn-ac1167dgr|\
iodata,wn-ac1600dgr2)
ath10kcal_extract "art" 20480 2116

View File

@ -0,0 +1,46 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9533_glinet_x750.dtsi"
&spi {
status = "okay";
num-cs = <0>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
art: partition@50000 {
label = "art";
reg = <0x050000 0x010000>;
};
partition@60000 {
label = "firmware";
reg = <0x060000 0xfa0000>;
};
};
};
};

View File

@ -0,0 +1,95 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "qca9533.dtsi"
/ {
compatible = "glinet,x750", "qca,qca9533";
model = "GL.iNet GL-X750";
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins>;
button0 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
power {
label = "gl-x750:green:power";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan2g {
label = "gl-x750:green:wlan2g";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wlan5g {
label = "gl-x750:green:wlan5g";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wan {
label = "gl-x750:green:wan";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "off";
};
4g {
label = "gl-x750:green:4g";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
};
&pcie0 {
status = "okay";
};
&uart {
status = "okay";
};
&usb0 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy {
status = "okay";
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x0>;
phy-handle = <&swphy4>;
};
&eth1 {
mtd-mac-address = <&art 0x6>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x1002>;
};

View File

@ -176,6 +176,14 @@ define Device/glinet_ar300m_nor
endef
TARGET_DEVICES += glinet_ar300m_nor
define Device/glinet_x750
ATH_SOC := qca9533
DEVICE_TITLE := GL.iNet GL-ARX750
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca9887
IMAGE_SIZE := 16000k
endef
TARGET_DEVICES += glinet_x750
define Device/iodata_etg3-r
ATH_SOC := ar9342
DEVICE_TITLE := I-O DATA ETG3-R