From 9754b6ba6f32e634934d99cdd4129041f9297d1a Mon Sep 17 00:00:00 2001 From: Jan Hoffmann Date: Thu, 19 Aug 2021 18:51:45 +0200 Subject: [PATCH] ltq-vdsl/ltq-vdsl-app: clean up configure args The userspace application now uses the model=full option to match the configuration of the kernel module. The source no longer contains SOAP support, which was the primary reason to build only typical instead of full before. This makes several CLI commands, which were already supported in the kernel module, available in the userspace application. For example, this includes bbsg which allows to get information about VDSL2 bands. Some previously applied build options were redundant. Disabling ADSL MIB support is unnecessary, as it only applies to Danube. ADSL LED support is no longer included in the source. ReTx counters are already included with model type full. This increases the size of the userspace application by approximately 15 kB (uncompressed). The kernel module does not change at all. Signed-off-by: Jan Hoffmann --- package/kernel/lantiq/ltq-vdsl/Makefile | 13 +++++-------- package/network/config/ltq-vdsl-app/Makefile | 13 +++++-------- 2 files changed, 10 insertions(+), 16 deletions(-) diff --git a/package/kernel/lantiq/ltq-vdsl/Makefile b/package/kernel/lantiq/ltq-vdsl/Makefile index 229e2b577c..f45895ba33 100644 --- a/package/kernel/lantiq/ltq-vdsl/Makefile +++ b/package/kernel/lantiq/ltq-vdsl/Makefile @@ -9,7 +9,7 @@ include $(INCLUDE_DIR)/kernel.mk PKG_NAME:=ltq-vdsl-vr9 PKG_VERSION:=4.17.18.6 -PKG_RELEASE:=4 +PKG_RELEASE:=5 PKG_BASE_NAME:=drv_dsl_cpe_api PKG_SOURCE:=$(PKG_BASE_NAME)_vrx-$(PKG_VERSION).tar.gz @@ -55,17 +55,14 @@ CONFIGURE_ARGS += --enable-kernel-include="$(LINUX_DIR)/include" \ --enable-ifxos-include="-I$(STAGING_DIR)/usr/include/ifxos" \ --enable-driver-include="-I$(STAGING_DIR)/usr/include/vdsl" \ --enable-add-drv-cflags="-DMODULE -DINCLUDE_DSL_ATM_PTM_INTERFACE_SUPPORT" \ - --enable-adsl-led=no \ - --enable-adsl-mib=no \ - --enable-dsl-ceoc=no \ --enable-linux-26 \ --enable-kernelbuild="$(LINUX_DIR)" \ - --enable-debug-prints=no \ - --enable-dsl-pm-retx-counters \ - --enable-dsl-pm-retx-thresholds \ + --enable-debug-prints=no ARCH=mips -CONFIGURE_ARGS += --enable-model=full +CONFIGURE_ARGS += \ + --enable-model=full \ + --enable-dsl-ceoc=no #CONFIGURE_ARGS += --enable-model=lite #CONFIGURE_ARGS += --enable-model=footprint #CONFIGURE_ARGS += --enable-model=typical diff --git a/package/network/config/ltq-vdsl-app/Makefile b/package/network/config/ltq-vdsl-app/Makefile index 0823a0e7e9..6ea103de8d 100644 --- a/package/network/config/ltq-vdsl-app/Makefile +++ b/package/network/config/ltq-vdsl-app/Makefile @@ -9,7 +9,7 @@ include $(INCLUDE_DIR)/kernel.mk PKG_NAME:=ltq-vdsl-app PKG_VERSION:=4.17.18.6 -PKG_RELEASE:=8 +PKG_RELEASE:=9 PKG_BASE_NAME:=dsl_cpe_control PKG_SOURCE:=$(PKG_BASE_NAME)_vrx-$(PKG_VERSION).tar.gz PKG_SOURCE_URL:=@OPENWRT @@ -61,15 +61,12 @@ CONFIGURE_ARGS += \ --disable-dti \ --with-channels-per-line="1" -#CONFIGURE_ARGS += --enable-model=full +CONFIGURE_ARGS += \ + --enable-model=full \ + --enable-dsl-ceoc=no #CONFIGURE_ARGS += --enable-model=lite #CONFIGURE_ARGS += --enable-model=footprint -CONFIGURE_ARGS += \ - --enable-model=typical \ - --enable-dsl-pm-showtime \ - --disable-dsl-ceoc \ - --enable-dsl-pm-retx-counters \ - --enable-dsl-pm-retx-thresholds +#CONFIGURE_ARGS += --enable-model=typical #CONFIGURE_ARGS += --enable-model=debug define Package/ltq-vdsl-app/install